The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Design and Testing of a Four-Phase Fault-Tolerant Permanent-Magnet Machine for an Engine Fuel Pump
Abstract
This paper discusses the design and testing of an aircraft electric fuel pump drive. The drive is a modular, four-phase, fault-tolerant system which is designed to meet the specification with a fault in any one of the phases. The motor employed has a permanent-magnet rotor with the magnets arranged in a Halbach array to maximize the air-gap flux density. Exceptionally high electric loadings are obtained by flooding the entire motor with aircraft fuel, which acts as an excellent cooling agent. Theoretical results are compared with test results gained in conditions approaching those found in an aircraft. Tests are carried out on the unfaulted drive and with one of several fault scenarios imposed. The electrical and thermal performance of the drive is assessed, showing how the flooded fuel cooling has excellent performance without introducing significant drag on the rotor.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fault-tolerant permanent magnet machinedrives
Mecrow, B. C., Jack, A. G., Haylock, J. A., & Coles, J. (1996) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:19960796 · Cited by 376 · cited 1×
“An earlier work [8] described a six-phase demonstrator which uses a similar modular design philosophy, how it detects faults [9], and how it continues to operate in the presence of open-”
BackgroundSelf-citationJack, A. G., Mecrow, B. C., & Haylock, J. A. (1996) · IEEE Transactions on Industry Applications · doi:10.1109/28.511646 · Cited by 368
Self-citationImproved Reliability in Solid-State AC Drives by Means of Multiple Independent Phase Drive Units
Jahns, T. M. (1980) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1980.4503793 · Cited by 358
Jack, A. G., Mecrow, B. C., & Haylock, J. (2002) · IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting · doi:10.1109/ias.1995.530372 · Cited by 306
Self-citationOperation of fault tolerant machines with winding failures
Haylock, J. A., Mecrow, B. C., Jack, A. G., & Atkinson, D. J. (1999) · IEEE Transactions on Energy Conversion · doi:10.1109/60.815095 · Cited by 148
Self-citationFault detection and management system for fault tolerant switched reluctance motor drives
Stephens, C. M. (2003) · doi:10.1109/papcon.1992.186280 · Cited by 142
Fault detection and management system for fault-tolerant switched reluctance motor drives
Stephens, C. M. (1991) · IEEE Transactions on Industry Applications · doi:10.1109/28.108460 · Cited by 116
Cited by
Multiphase induction motor drives – a technology status review
Levi, E., Bojoi, R., Profumo, F., Toliyat, H. A., & Williamson, S. (2007) · IET Electric Power Applications · doi:10.1049/iet-epa:20060342 · Cited by 1,619
EL-Refaie, A. M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2030211 · Cited by 1,373
Strategies for the Fault-Tolerant Current Control of a Five-Phase Permanent-Magnet Motor
Bianchi, N., Bolognani, S., & Dai Pre, M. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.900445 · Cited by 276
Wang, B., Wang, J., Griffo, A., & Huang, L. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2908595 · Cited by 33
Metadata
- Authors
- Mecrow, B. C., Jack, A. G., Atkinson, D. J., Green, S. R., Atkinson, G. J., King, A., & Green, B.
- Venue
- IEEE Transactions on Energy Conversion
- Published
- 2004-12
- Volume
- 19
- Issue
- 4
- Pages
- 671-678
- ISSN
- 0885-8969 (ISSN-L)
- OpenAlex
- W2015262331
- Cited by
- 252
- References
- 7
- FWCI
- 6.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.