Evidence for Voltage-Driven Set/Reset Processes in Bipolar Switching RRAM
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Understanding the physical mechanisms for resistance change in metal oxides is a key challenge to assess the scalability of resistive-switching random access memory (RRAM) devices. From this standpoint, the time dependence of filament formation and dissolution in metal oxides can provide a useful insight into the fundamental mechanism of resistive switching. In this paper, we show an experimental study of the time-dependent filament growth and of the voltage dependence of set/reset times in HfO_x-based RRAM devices. The voltage across the device is shown to be regulated at any given time irrespective of the compliance current and the applied voltage, evidencing that voltage is the controlling parameter for the filament formation and dissolution during switching. These results are explained in terms of a thermally-activated ion migration model for filamentary switching. The model allows for an analytical calculation of the scaling dependence of set/reset times and energies in RRAM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Strukov, D. B., Snider, G. S., Stewart, D. R., & Williams, R. S. (2008) · Nature · doi:10.1038/nature06932 · Cited by 11,828
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080
Lee, M.-J., Lee, C. B., Lee, D., Lee, S. R., Chang, M., Hur, J. H., Kim, Y.-B., Kim, C.-J., Seo, D. H., Seo, S., et al. (2011) · Nature Materials · doi:10.1038/nmat3070 · Cited by 2,228 · cited 2×
“RRAM has demonstrated extremely attractive features of high speed [6]–[8], low power [9]–[12], good scalability to small device area [10], [13], and extended endurance [14], [15].”
Background‘Memristive’ switches enable ‘stateful’ logic operations via material implication
Borghetti, J., Snider, G. S., Kuekes, P. J., Yang, J. J., Stewart, D. R., & Williams, R. S. (2010) · Nature · doi:10.1038/nature08940 · Cited by 1,929
High switching endurance in TaOx memristive devices
Yang, J. J., Zhang, M.-X., Strachan, J. P., Miao, F., Pickett, M. D., Kelley, R. D., Medeiros-Ribeiro, G., & Williams, R. S. (2010) · Applied Physics Letters · doi:10.1063/1.3524521 · Cited by 637
Origin of the Ultra‐nonlinear Switching Kinetics in Oxide‐Based Resistive Switches
Menzel, S., Waters, M., Marchewka, A., Böttger, U., Dittmann, R., & Waser, R. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201101117 · Cited by 348 · cited 2×
“Joule heating also affects the maximum temperature along the CF, therefore accelerating the ion migration rate in (4) [35]–[37].”
BackgroundResultStudy of Multilevel Programming in Programmable Metallization Cell (PMC) Memory
Russo, U., Kamalanathan, D., Ielmini, D., Lacaita, A. L., & Kozicki, M. N. (2009) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2009.2016019 · Cited by 319 · cited 2×
“The voltage controls EA through the lowering of the barrier for ion hopping, thus EA can be approximated as [25], [27], [33], [34]”
BackgroundSelf-citation
Cited by
Memristive devices for computing
Yang, J. J., Strukov, D. B., & Stewart, D. R. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2012.240 · Cited by 3,885
Resistive switching memories based on metal oxides: mechanisms, reliability and scaling
Ielmini, D. (2016) · Semiconductor Science and Technology · doi:10.1088/0268-1242/31/6/063002 · Cited by 905
Self-citationResistance random access memory
Chang, T.-C., Chang, K.-C., Tsai, T.-M., Chu, T.-J., & Sze, S. M. (2016) · Materials Today · doi:10.1016/j.mattod.2015.11.009 · Cited by 495
Resistive switching phenomena: A review of statistical physics approaches
Lee, J. S., Lee, S., & Noh, T. W. (2015) · Applied Physics Reviews · doi:10.1063/1.4929512 · Cited by 463
Physics of the Switching Kinetics in Resistive Memories
Menzel, S., Böttger, U., Wimmer, M., & Salinga, M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500825 · Cited by 301
Celano, U., Goux, L., Degraeve, R., Fantini, A., Richard, O., Bender, H., Jurczak, M., & Vandervorst, W. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b03078 · Cited by 186
Characterization of HfO 2 -based devices with indication of second order memristor effects
Rodriguez-Fernandez, A., Cagli, C., Perniola, L., Miranda, E., & Suñé, J. (2018) · Microelectronic Engineering · doi:10.1016/j.mee.2018.04.006 · Cited by 22
Metadata
- Authors
- Ielmini, D., Nardi, F., & Balatti, S.
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2012-08
- Volume
- 59
- Issue
- 8
- Pages
- 2049-2056
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W1996443105
- Cited by
- 134
- References
- 7
- FWCI
- 10.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.