RRAM Crossbar Array With Cell Selection Device: A Device and Circuit Interaction Study
The DOI matches its Crossref record; 35 of the 39 references it cites were found in a registry or an index.
Abstract
The resistive random access memory (RRAM) crossbar array has been extensively studied as one of the most promising candidates for future high-density nonvolatile memory technology. However, some problems caused by circuit and device interaction, such as sneak leakage paths, result in limited array size and large power consumption, which degrade the array performance significantly. Thus, the analysis on circuit and device interaction issue is imperative. In this paper, a simulation method is developed to investigate the critical issues correlated with the interaction between devices and the circuit. The simulations show that a large off/on ratio of resistance states of RRAM is beneficial for large readout margin (i.e., array size). The existence of the selector connected in series with an RRAM device can eliminate the need for highRonresistance, which is critical for the array consisted of only RRAM cells. The readout margin is more sensitive to the variation ofRonand is determined by the nonlinearity of theI-Vcharacteristics of RRAM, whereas the nonlinear characteristics of the selector device are beneficial for a larger readout margin. An optimal design scheme for turn-on voltage and conductance of the selector is proposed based on the simulation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Wong, H.-S. P., Lee, H.-Y., Yu, S., Chen, Y.-S., Wu, Y., Chen, P.-S., Lee, B., Chen, F. T., & Tsai, M.-J. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2012.2190369 · Cited by 2,757
Wong, H.-S. P., Raoux, S., Kim, S., Liang, J., Reifenberg, J. P., Rajendran, B., Asheghi, M., & Goodson, K. E. (2010) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2070050 · Cited by 1,806
Complementary resistive switches for passive nanocrossbar memories
Linn, E., Rosezin, R., Kügeler, C., & Waser, R. (2010) · Nature Materials · doi:10.1038/nmat2748 · Cited by 1,274
Åkerman, J. (2005) · Science · doi:10.1126/science.1110549 · Cited by 522
Two Series Oxide Resistors Applicable to High Speed and High Density Nonvolatile Memory
Lee, M. ‐., Park, Y., Suh, D. ‐., Lee, E. ‐., Seo, S., Kim, D. ‐., Jung, R., Kang, B. ‐., Ahn, S. ‐., Lee, C. B., et al. (2007) · Advanced Materials · doi:10.1002/adma.200700251 · Cited by 435
Guan, X., Yu, S., & Wong, H.-S. P. (2012) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2012.2184545 · Cited by 355
A stackable cross point Phase Change Memory
Kau, D., Tang, S., Karpov, I. V., Dodge, R., Klehn, B., Kalb, J. A., Strand, J., Diaz, A., Leung, N., Wu, J., et al. (2009) · 2009 IEEE International Electron Devices Meeting (IEDM) · doi:10.1109/iedm.2009.5424263 · Cited by 291
Liang, J., & Wong, H.-S. P. (2010) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2010.2062187 · Cited by 276
Writing to and reading from a nano-scale crossbar memory based on memristors
Vontobel, P. O., Robinett, W., Kuekes, P. J., Stewart, D. R., Straznicky, J., & Stanley Williams, R. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/42/425204 · Cited by 262
Research works printed but not linked: 3
- 2011, ITRS International Technology Roadmap for Semiconductors
- tran, 2011, High performance unipolar <ref_formula><tex Notation="TeX">$\hbox{AlO}_{y}/\hbox{HfO}_{x}/\hbox{Ni}$</tex> </ref_formula> based RRAM compatible with Si diodes for 3D application, Proc VLSI Symp Technol, 44
- wang, 2010, Three-dimensional <ref_formula><tex Notation="TeX">$\hbox{4F}^{2}$</tex></ref_formula> ReRAM cell with CMOS logic compatible process, IEDM Tech Dig, 29.6.1
Cited by
Items 101–186 of 186
Kim, T.-H., Song, B., Jung, I.-J., & Jung, S. (2021) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2021.3133945 · Cited by 8
Imply logic based on TiO2 memristor model for computational circuits
Sharma, G., & Bhargava, L. (2015) · International Conference on Circuit, Power and Computing Technologies · doi:10.1109/iccpct.2015.7159377 · Cited by 7
“flows out of the thick black line the memristance increases [17], [18], [19], [20].”
BackgroundDisturbance characteristics of half-selected cells in a cross-point resistive switching memory array
Chen, Z., Li, H., Chen, H., et al. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/21/215204 · Cited by 7
Self-citationLiou, Y., Haider, G., Cai, S., et al. (2016) · Advanced Optical Materials · doi:10.1002/adom.201600298 · Cited by 7
Reliability-aware cross-point resistive memory design
Xu, C., Niu, D., Zheng, Y., et al. (2014) · doi:10.1145/2591513.2591528 · Cited by 6
An efficient method for evaluating RRAM crossbar array performance
Lin, S., Zhang, J., Chen, A., Wu, H., Qian, H., & Yu, Z. (2016) · Solid-State Electronics · doi:10.1016/j.sse.2016.03.004 · Cited by 6
Exploiting In-Memory Data Patterns for Performance Improvement on Crossbar Resistive Memory
Wen, W., Zhao, L., Zhang, Y., & Yang, J. (2019) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2019.2940685 · Cited by 6
“[66] discussed the worst-case data patterns for read and write operations in an ReRAM crossbar array.”
BackgroundLiquid-Solid Hybrid Memory Device Achieved by Unique Features of Ionic Liquids
Satō, H., Shima, H., Honma, Y., Naitoh, Y., Akinaga, H., Nokami, T., Itoh, T., & Kinoshita, K. (2021) · IEEE Access · doi:10.1109/access.2021.3076701 · Cited by 6
Research on Improving the Working Current of NbOx-Based Selector by Inserting a Ti Layer
Liu, C., Ma, G., Zeng, J., et al. (2021) · Frontiers in Materials · doi:10.3389/fmats.2021.716065 · Cited by 6
“Given the low-power consumption and the high switching speed (Deng et al., 2013; Tsai et al., 2016; He et al., 2019a), resistive random access memory (RRAM) has been extensively studied in the new generation of storage technology.”
BackgroundSol–Gel-Processed Y2O3–Al2O3 Mixed Oxide-Based Resistive Random-Access-Memory Devices
Kim, H.-I., Lee, T., Cho, Y., Lee, S., Lee, W., Kim, K., & Jang, J. (2023) · Nanomaterials · doi:10.3390/nano13172462 · Cited by 6
Ultra-low energy neuromorphic device based navigation approach for biomimetic robots
Sarim, M., Schultz, T., Jha, R., & Kumar, M. (2016) · IEEE National Aerospace and Electronics Conference (NAECON) · doi:10.1109/naecon.2016.7856805 · Cited by 8
“The synaptic memory device is located in series with the selection device, and the resistance of those two devices in series is governed only by the memory device [4].”
BackgroundInvestigation on the Worst Read Scenario of a ReRAM Crossbar Array
Youn, Y., Kim, K., Sim, J., Park, H.-J., & Kim, B. (2017) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2017.2710140 · Cited by 6
“Although several researchers [6], [7] suggested the worst”
BackgroundMethodResultInfluentialWang, C., Feng, D., Tong, W., Liu, J., Wu, B., Zhao, W. J., & Zhang, Y. (2019) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2019.2945058 · Cited by 7
“2 is 2 × 103 [32].”
Sneak Path Free Reconfiguration With Minimized Programming Steps for Via-Switch Crossbar-Based FPGA
Doi, R., Yu, J., & Hashimoto, M. (2019) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2019.2960331 · Cited by 6
“To reduce the signal propagation delay in crossbars for FPGA, we set on-resistance of a via-switch to 400 [14] whereas the on-resistance for memory purpose is in a range of a few kilo-ohms to hundreds kilo-ohms [23]–[26].”
MethodVertical limits of resistive memory scaling: The detrimental influence of interface states
Hazra, P., & Jinesh, K. B. (2020) · Applied Physics Letters · doi:10.1063/1.5139595 · Cited by 6
Transfer modeling of 1T1R crossbar arrays with line resistances based on matrix algebra method
Zhang, X., Zeng, Y., Yuan, L., & Zhou, L. P. (2021) · Solid-State Electronics · doi:10.1016/j.sse.2021.108220 · Cited by 5
Influence of selector-introduced compliance current on HfOx RRAM switching operation
Fang, Y., Cai, Y., Wang, Z., et al. (2015) · Non-Volatile Memory Technology Symposium · doi:10.1109/nvmts.2015.7457474 · Cited by 5
“The impact of selectors on the read operation in RRAM array has been extensively studied in literatures [4-6].”
BackgroundSelf-citationAnalysis of Leakage Current of HfO2/TaOx-Based 3-D Vertical Resistive Random Access Memory Array
Chen, Z., Song, R., Huo, Q., Ren, Q., Zhang, C., Li, L., & Zhang, F. (2021) · Micromachines · doi:10.3390/mi12060614 · Cited by 6
Effect of Sneak Path Current in TiOx/HfOx Based 1S1R RRAM Crossbar Memory Array
Youssef, A. N., Jagath, A. L., Kumar, T. N., et al. (2021) · IEEE Student Conference on Research and Development (SCOReD) · doi:10.1109/scored53546.2021.9652781 · Cited by 5
Ju, X., & Ang, D. S. (2022) · IEEE Electron Device Letters · doi:10.1109/led.2022.3162639 · Cited by 6
“well-known sneak-path current [7], [8].”
Noh, M., Byun, Y., Kim, G., Park, J., Kim, S., & Kim, S. (2025) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.5c01300 · Cited by 4
Investigation of power dissipation for ReRAM in crossbar array architecture
Sun, W., Lim, H., Shin, H., & Lee, W. (2014) · Non-Volatile Memory Technology Symposium · doi:10.1109/nvmts.2014.7060847 · Cited by 4
“1/3 bias scheme has a disadvantage in respect of power consumption, but 1/3 bias scheme has advantages on read/write margin because the voltage difference between the selected device and unselected devices is largest among three bias schemes so that the reliable write operation is possible [6].”
BackgroundEnTiered-ReRAM: An Enhanced Low Latency and Energy Efficient TLC Crossbar ReRAM Architecture
Zhang, Y., Yu, Z., Gu, L., Wang, C., & Feng, D. (2021) · IEEE Access · doi:10.1109/access.2021.3129878 · Cited by 4
“…[18] have constructed a 1T1R ReRAM prototype with a cell size of 15 F 2 and Sheu et al. [11] have also built a HfOx-based ReRAM prototype with a cell size of 9.5 F to each other without access transistors, where a cell only occupies an area of 4 F 2 (The smallest planar cell size in theory) [8].”
BackgroundInfluentialKim, J., Kwon, O., Lee, K., et al. (2023) · Nanotechnology · doi:10.1088/1361-6528/ad02a2 · Cited by 4
“Therefore, by estimating the actual 1S1R behavior of the 2DEG RRAM device ( 30 nm cell size ) using a low operating voltage, we con fi rm its applicability to a crossbar array circuit, which is a representative example of a high-density memory application [ 28 – 30 ] .”
Hybrid CMOS-Ferroelectric FET-Based Image Sensor With Tunable Dynamic Range
Jain, M., Singh, R. K., Rafiq, M., et al. (2023) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2023.3331677 · Cited by 4
“F) is defined as follows : Table I presents the performance benchmarking of the proposed hybrid CMOS-FeFET pixel with the prior capacitive approaches to DR improvement in 4T-pixel circuits [9], [11], [26].”
BackgroundResultMAC-based Mapping of Adder Architectures to RRAM Crossbars
Shirinzadeh, F., Nabipour, S., Dalia, K., et al. (2025) · IEEE International Conference on Emerging Electronics (ICEE) · doi:10.1109/icee67165.2025.11409793 · Cited by 3
“These devices are typically implemented in crossbar architectures, where each memory cell is formed at the junction of orthogonally arranged nanowires, bitlines and wordlines, enabling dense and efficient memory arrays [6]–[10].”
FRAM Array: A Device and Circuit Interaction Study at Advanced Technology Nodes
Cui, X., Ye, J., Chen, B., Yu, H., Liu, D., Li, B., Zhou, J., Cheng, R., Yu, X., Liu, Y., et al. (2024) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2024.3514812 · Cited by 3
“…lines, according to the IRDS roadmap, respectively [21]. of FRAM array, where the signals are eventually read on the BLs. Due to the significant impact of the interconnects in the memory array on FRAM’s performance [17], [18], [19], the parasitic effect of the BLs and PLs should be considered.”
Self-citationKim, K., Kang, S., Sim, J., Park, H.-J., & Kim, B. (2018) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2018.2855959 · Cited by 3
“read current evaluation can be seriously erroneous when the conventionally believed worst scenario [4], [6] is blindly used”
BackgroundMethodResultInfluentialBottom electrode reactivity and bonding strength effect on resistive switching in HfO2-based RRAM
Jung, S.-W., Lee, K., Kim, M., Cho, J., Park, S. H., Lee, H.-G., Noh, J., & Choi, B. (2025) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2025.109438 · Cited by 3
Fault Mitigation of Switching Lattices under the Stuck-At-Fault Model
Anghel, L., Bernasconi, A., Ciriani, V., et al. (2019) · IEEE Latin American Test Symposium (LATS) · doi:10.1109/latw.2019.8704615 · Cited by 3
“This paradigm, allows logic and arithmetic operations to be directly processed in the memory within the crossbar array, making them attractive from neuromorphic applications such as prediction, classification and decision-making problems [9], [18].”
MethodNew write operation scheme for alleviating effect of line resistance on RRAM crossbar array
Li, J., Xu, H. F., Xing, J., Song, B., Liu, S., Li, Z., Wang, W., Li, Q., & Liu, H. (2016) · IEEE Advanced Information Management, Communicates, Electronic and Automation Control Conference (IMCEC) · doi:10.1109/imcec.2016.7867326 · Cited by 3
“…previous works proposed several underlying solutions recently, such as applying partial bias schemes[3], introducing an additional device (lD-1R[4], IT-1R[5], 1S-lR[6]) in series with the RRAM device to reduce unwanted leakage current paths or utilizing the RRAM intrinsic self-rectifying…”
MethodMulti-Bit Read and Write Methodologies for Diode-STTRAM Crossbar ArrayPreprint
Khan, M. N. I., Ghosh, S., Aluru, R. K., & Jha, R. (2016) · arXiv (Cornell University) · doi:10.48550/arxiv.1606.00470 · Cited by 3
“Multi-bit write for ReRAM crossbar has been proposed in [7] [11] where the ‘1’s are written in 1 st cycle and ‘0’s are written in the 2 nd cycle.”
BackgroundMethodInfluentialHeo, S., Choi, S., Yoon, J., Kim, T., Bae, J., Kang, I.-M., Kim, K., Lee, Y. U., Lee, W.-Y., & Jang, J. (2025) · Journal of the Korean Ceramic Society · doi:10.1007/s43207-025-00575-1 · Cited by 2
TiO2‐Based Schottky Diodes as Bidirectional Switches for Bipolar Resistive Memories
Zhang, X., Jin, J., Kim, J., et al. (2024) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.202400156 · Cited by 2
Heo, S., Choi, S., Lee, S., et al. (2024) · Materials · doi:10.3390/ma17215252 · Cited by 2
“To solve this problem, a transistor is connected to the RRAM devices, forming a 1T-1R structure [20,21].”
MethodPark, H., So, H., Ko, M., Kim, S., & Kim, S. (2025) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.5c01301 · Cited by 2
Resistive switching properties of alkaline earth oxide-based memory devices
Lee, K.-J., Chang, Y., Lee, C.-J., et al. (2017) · Microelectronics Reliability · doi:10.1016/j.microrel.2017.06.080 · Cited by 2
Read margin analysis of crossbar arrays using the cell-variability-aware simulation method
Sun, W., Choi, S., & Shin, H. (2017) · Solid-State Electronics · doi:10.1016/j.sse.2017.10.016 · Cited by 2
Hu, Q., Kang, T. S., Abbas, H., Lee, T. S., Lee, N. J., Yoon, T., Kim, J., Park, M. R., & Kang, C. J. (2018) · Japanese Journal of Applied Physics · doi:10.7567/jjap.57.086501 · Cited by 2
Sub-crosspoint RRAM decoding for improved area efficiency
Patel, R., & Friedman, E. G. (2014) · IEEE/ACM International Symposium on Nanoscale Architectures (NANOARCH) · doi:10.1109/nanoarch.2014.6880488 · Cited by 2
A Code Inversion Encoding Technique to Improve Read Margin of A Cross-Point Phase Change Memory
Kim, K., Kang, S., & Kim, B. (2019) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2019.2909535 · Cited by 2
“of the typical read schemes [4], [1], [11].”
BackgroundThe synthesis method of logic circuits based on the iMemComp gates
Cui, X., Lin, Q., Cui, X., et al. (2020) · Integration · doi:10.1016/j.vlsi.2020.01.007 · Cited by 2
Self-citationResearch on the ability of over current in Ti/NbOx/Pt-based selector
Liu, C., Ma, G., Chen, A., Zhao, X., Zhou, C., & Wang, H. (2020) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-020-03670-7 · Cited by 2
Optimal Design of FPGA Switch Matrix with Ion Mobility Based Nonvolatile ReRAM
Hai-yun, P., & Zhou, W. (2015) · Discrete Dynamics in Nature and Society · doi:10.1155/2015/586842 · Cited by 1
Huang, P. C., Chen, S., Zhao, Y., et al. (2016) · IEEE Silicon Nanoelectronics Workshop · doi:10.1109/snw.2016.7577974 · Cited by 1
Self-citationInvestigation of Selector Characteristics for Scalable 1S1R Array
Yang, G., Wang, Z., Xie, R. H., Shan, L., Zhang, H., Zhou, X., Li, J., Ban, C., Bao, L., Wang, C., et al. (2025) · China Semiconductor Technology International Conference (CSTIC) · doi:10.1109/cstic64481.2025.11017844 · Cited by 1
“Many 1S1R device-level works have been reported based on IMT-selectors [5,6], however, the systematic explorations of the electrical characteristic matching between RRAMs and selectors are lacking.”
Masum, A. K. M., Moghadam, M. S., Moon, S. H., Ahmed, A. M. M., Najafi, M. H., Reis, D. A., & Aygün, S. (2025) · ACM/IEEE Design Automation Conference (DAC) · doi:10.1109/dac63849.2025.11133357 · Cited by 3
“IMC components handle the addition (step 4 ) and binarization (step 5 ) processes, leveraging Digital-to-Analog Converters (DACs), Analog-to-Digital Converters (ADCs) reported in [7], and ReRAM-based crossbar [8].”
Sun, W., Choi, S., Lim, H., & Shin, H. (2016) · Japanese Journal of Applied Physics · doi:10.7567/jjap.55.04ee10 · Cited by 1
Stuck-At Fault Mitigation of Emerging Technologies Based Switching Lattices
Anghel, L., Bernasconi, A., Ciriani, V., et al. (2020) · Journal of Electronic Testing · doi:10.1007/s10836-020-05885-2 · Cited by 1
Low-voltage programming of RRAM-based crossbar arrays using MOS parasitic diodes
Maheshwari, S., Serb, A., & Prodromakis, T. (2025) · Frontiers in Nanotechnology · doi:10.3389/fnano.2025.1587700 · Cited by 2
Multilevel Resistance Programming in Conductive Bridge Resistive Memory
Mahalanabis, D. (2015) · Cited by 1
Energy Efficient RRAM Crossbar-Based Approximate Computing for Smart Cameras
Wang, Y., Li, B., Xia, L., Tang, T., & Yang, H. (2016) · Springer eBooks · doi:10.1007/978-3-319-33201-7_5 · Cited by 1
Efficient models for designing GB-level 3-D 1S1R horizontal-stacked-RRAM and vertical-RRAM arrays
Lin, S., & Zhang, J. (2017) · International Conference on Simulation of Semiconductor Processes and Devices · doi:10.23919/sispad.2017.8085283 · Cited by 1
A Rule-of-thumb Condition to Avoid Large HRS Current in ReRAM Crossbar Array Design
Youn, Y., Kim, K., & Kim, B. (2018) · International SoC Design Conference · doi:10.1109/isocc.2018.8649923 · Cited by 1
“THE DEPENDENCY OF THE WORST HRS READ CURRENT ON THE ARRAY SIZE For the analysis of the worst IreadHRS, the worst-case scenario of HRS reading in [4] (the HRS cell at the nearest”
MethodThe Impact of Interconnect Resistance on One-Selector One-Resistor (1S1R) Crossbar Array Performance
Li, Y., Gao, B., Wu, H., et al. (2019) · China Semiconductor Technology International Conference (CSTIC) · doi:10.1109/cstic.2019.8755613 · Cited by 1
Self-citationMulti-Bit Read and Write Methodologies for Diode-MTJ Crossbar Array
Khan, M. N. I., & Ghosh, S. (2020) · International Symposium on Quality Electronic Design (ISQED) · doi:10.1109/isqed48828.2020.9137015 · Cited by 1
“Electron affinity of TaOx and MgO of 3.5 eV, and 2.3eV respectively [7], and, the dielectric constant value of TaOx and MgO of 22, and 10 respectively, are used and the work-function of TiN of 4.0 eV is also incorporated.”
BackgroundMethodInfluentialAddressing crosstalk in crossbar memory arrays with a resistive switching ZnO homojunction diode
Mainali, P., Bastatas, L. D., Echeverría, E., Wagle, P., Sankaran, P., & McIlroy, D. N. (2021) · Journal of Applied Physics · doi:10.1063/5.0050564 · Cited by 2
Reliability simulation of TMO RRAM
Liu, X., Huang, P. C., Gao, B., et al. (2015) · IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA) · doi:10.1109/ipfa.2015.7224452
Self-citationSub-crosspoint RRAM decoding for improved area efficiency
Patel, R., & Friedman, E. G. (2014) · IEEE/ACM International Symposium on Nanoscale Architectures (NANOARCH) · doi:10.1145/2770287.2770312
Mixed-Ionic-Electronic-Conduction (MIEC)-Based Access Devices for 3D Multilayer Crosspoint Memory
Virwani, K. R., Burr, G. W., Narayanan, P., & Kurdi, B. N. (2015) · MRS Proceedings · doi:10.1557/opl.2015.24
Modern System Design Using Memristors
Guckert, L., & Swartzlander, E. E. (2017) · Studies in computational intelligence · doi:10.1007/978-3-319-51724-7_6
Cell-to-array thermal-aware analysis of stacked RRAM
Luo, Y., Ogrenci-Memik, S., & Gu, J. (2017) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2017.8050966
“models have been proposed [10, 11].”
Fabrication of nano-wedge resistive switching memory and analysis on its switching characteristics
Lee, D. K., Kim, S., Kim, M., Bang, S., Kim, T., & Park, B. (2017) · Silicon Nanoelectronics Workshop (SNW) · doi:10.23919/snw.2017.8242294
“Thus, nextgeneration memories such as PCRAM, STI-MRAM and ReRAM, are under the extensive research [1-3].”
BackgroundResistive Switching Behaviours and Novel Device Applications of Metal-Oxide-Si/Ge Structures
Chen, B., Zhang, Y., Na, W., Huang, P. C., & Zhao, Y. (2018) · IEEE SOI-3D-Subthreshold Microelectronics Technology Unified Conference · doi:10.1109/s3s.2018.8640216
Self-citationDeep Neural Network Optimized to Resistive Memory with Nonlinear Current-Voltage CharacteristicsPreprint
Kim, H., Kim, T., Kim, J.-S., et al. (2017) · arXiv (Cornell University) · doi:10.48550/arxiv.1703.10642
Multi-level Memristive Memory for Neural Networks
Irmanova, A., Myrzakhmet, S., & James, A. P. (2019) · Modeling and optimization in science and technologies · doi:10.1007/978-3-030-14524-8_8
RRAM Device Characterizations and Modelling
Huang, P. C., Gao, B., & Kang, J. (2021) · Springer eBooks · doi:10.1007/978-981-15-6912-8_11
Self-citationTransfer Modeling for 1T1R Crossbar Arrays with Line ResistancesPreprint
Zhang, X., & Zeng, Y. (2021) · Research Square · doi:10.21203/rs.3.rs-356720/v1
“Moreover, SPICE-based circuit simulation lacks flexibility in adjusting several array parameters, and usually does not consider the influence of line resistance on array operation [7,23].”
BackgroundMethodLin, S., Chang, T., Lien, C., et al. (2021) · Applied Physics Express · doi:10.35848/1882-0786/ac200c
Wang, C., Feng, D., Tong, W., Liu, J., Wu, B., & Chen, Y. (2021) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2021.3123591 · Cited by 2
“V characteristics of the memory cells can be analytically modeled as where k and α are constants [1], [19], [21], [24], [31]–[34].”
BackgroundMethodPrince, B. (2014) · Wiley eBooks · doi:10.1002/9781118760475.ch05
Singh, T., & Ramadan, M. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-815732-9.00148-0
Singh, T. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.04068-6
Huang, P. C., Zhao, Y., & Kang, J. (2022) · Springer handbooks · doi:10.1007/978-3-030-79827-7_29
Self-citationSingh, T. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-819728-8.00117-0
Lateral Electrochemical Metallization Cells for Reconfigurable Interconnect Systems
Frahm, T., Buttberg, M., Gvozdev, G. A., Müller, R., Chen, S., Sun, B., Raffauf, L., Menzel, S., Valov, I., Wouters, D. J., et al. (2023) · IEEE Journal of the Electron Devices Society · doi:10.1109/jeds.2023.3297855
“tor devices placed at the memristor-crossbar junction [26], [27].”
BackgroundControllable multilevel quantized conduction states in vertical CBRAM using Cu-nanodot ion source
Lee, S., Lee, C., Kwon, O., Heo, S., & Hwang, H. (2024) · Applied Physics Letters · doi:10.1063/5.0221485
Zheng, Z., Liang, L., Yang, Y., Lin, J., Li, M., Wang, Z., & Cai, Y. (2025) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2025.3645199
“Adopting RRAM-based CIM significantly lowers DNN computational complexity, minimizes data movement, and speeds up inference [15], [16].”
Biasing Schemes & Loading Effects in Analog Selectors Built with Transmission Gate Logic
Ashik, M. A. A., Hasan, T. M., Islam, M. J., et al. (2025) · IEEE Region 10 Conference (TENCON) · doi:10.1109/tencon66050.2025.11375454
“One of the most critical applications of TGL switches as analog selectors (multiplexers) is for selecting memory cells from a crossbar array [2].”
Threshold Switching Behavior and Underlying Mechanisms in Pure SiO 2 -Based Selectors
Kim, H. R., Ha, T. J., Song, J. H., Park, S., Moon, J. S., Choi, M., Lee, J. H., Han, J. H., Choi, B. J., Jang, J. H., et al. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c25598 · Cited by 1
Study and analysis of memristor for analog and digital design
Pandya, J. D., & Gupta, R. (2026) · Analog Integrated Circuits and Signal Processing · doi:10.1007/s10470-026-02566-6
Minvielle, M. (2017) · theses.fr (ABES) · doi:10.70675/30e2fd37z4e73z4c48zbb79z240c96cc0a60
Reganaz, L. (2024) · theses.fr (ABES) · doi:10.70675/8a8c196ez95d7z468czabf2z768bdddceef5 · Cited by 1
Computation in Memory for Reliable and Energy-Efficient Diabetic Retinopathy Screening
Diware, S., Chilakala, K., & Bishnoi, R. (2025) · Springer eBooks · doi:10.1007/978-3-032-09253-3_8
Yoon, J., Kim, T., Bae, J., et al. (2026) · Journal of Science Advanced Materials and Devices · doi:10.1016/j.jsamd.2026.101249
Metadata
- Authors
- Deng, Y., Huang, P., Chen, B., Yang, X., Gao, B., Wang, J., Zeng, L., Du, G., Kang, J., & Liu, X.
- Affiliations
- Peking University (CN)
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2013-02
- Volume
- 60
- Issue
- 2
- Pages
- 719-726
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W2133557550
- Cited by
- 184
- References
- 39
- Citations by year
- 2026: 4 · 2025: 12 · 2024: 10 · 2023: 9 · 2022: 11 · 2021: 17 · 2020: 18 · 2019: 19 · 2018: 13 · 2017: 19 · 2016: 21 · 2015: 19 · 2014: 12
- FWCI
- 6.34
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Electron Devices (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor materials and devices
- Keywords
- resistive random access memory, sneak paths, selector devices, RON, turn-on voltage, conductance, non-volatile memory, array size
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.