RRAM Crossbar Array With Cell Selection Device: A Device and Circuit Interaction Study
The DOI matches its Crossref record; 35 of the 39 references it cites were found in a registry or an index.
Abstract
The resistive random access memory (RRAM) crossbar array has been extensively studied as one of the most promising candidates for future high-density nonvolatile memory technology. However, some problems caused by circuit and device interaction, such as sneak leakage paths, result in limited array size and large power consumption, which degrade the array performance significantly. Thus, the analysis on circuit and device interaction issue is imperative. In this paper, a simulation method is developed to investigate the critical issues correlated with the interaction between devices and the circuit. The simulations show that a large off/on ratio of resistance states of RRAM is beneficial for large readout margin (i.e., array size). The existence of the selector connected in series with an RRAM device can eliminate the need for highRonresistance, which is critical for the array consisted of only RRAM cells. The readout margin is more sensitive to the variation ofRonand is determined by the nonlinearity of theI-Vcharacteristics of RRAM, whereas the nonlinear characteristics of the selector device are beneficial for a larger readout margin. An optimal design scheme for turn-on voltage and conductance of the selector is proposed based on the simulation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Wong, H.-S. P., Lee, H.-Y., Yu, S., Chen, Y.-S., Wu, Y., Chen, P.-S., Lee, B., Chen, F. T., & Tsai, M.-J. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2012.2190369 · Cited by 2,757
Wong, H.-S. P., Raoux, S., Kim, S., Liang, J., Reifenberg, J. P., Rajendran, B., Asheghi, M., & Goodson, K. E. (2010) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2070050 · Cited by 1,806
Complementary resistive switches for passive nanocrossbar memories
Linn, E., Rosezin, R., Kügeler, C., & Waser, R. (2010) · Nature Materials · doi:10.1038/nmat2748 · Cited by 1,274
Åkerman, J. (2005) · Science · doi:10.1126/science.1110549 · Cited by 522
Two Series Oxide Resistors Applicable to High Speed and High Density Nonvolatile Memory
Lee, M. ‐., Park, Y., Suh, D. ‐., Lee, E. ‐., Seo, S., Kim, D. ‐., Jung, R., Kang, B. ‐., Ahn, S. ‐., Lee, C. B., et al. (2007) · Advanced Materials · doi:10.1002/adma.200700251 · Cited by 435
Guan, X., Yu, S., & Wong, H.-S. P. (2012) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2012.2184545 · Cited by 355
A stackable cross point Phase Change Memory
Kau, D., Tang, S., Karpov, I. V., Dodge, R., Klehn, B., Kalb, J. A., Strand, J., Diaz, A., Leung, N., Wu, J., et al. (2009) · 2009 IEEE International Electron Devices Meeting (IEDM) · doi:10.1109/iedm.2009.5424263 · Cited by 291
Liang, J., & Wong, H.-S. P. (2010) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2010.2062187 · Cited by 276
Writing to and reading from a nano-scale crossbar memory based on memristors
Vontobel, P. O., Robinett, W., Kuekes, P. J., Stewart, D. R., Straznicky, J., & Stanley Williams, R. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/42/425204 · Cited by 262
Research works printed but not linked: 3
- 2011, ITRS International Technology Roadmap for Semiconductors
- tran, 2011, High performance unipolar <ref_formula><tex Notation="TeX">$\hbox{AlO}_{y}/\hbox{HfO}_{x}/\hbox{Ni}$</tex> </ref_formula> based RRAM compatible with Si diodes for 3D application, Proc VLSI Symp Technol, 44
- wang, 2010, Three-dimensional <ref_formula><tex Notation="TeX">$\hbox{4F}^{2}$</tex></ref_formula> ReRAM cell with CMOS logic compatible process, IEDM Tech Dig, 29.6.1
Cited by
Emerging Memory Technologies: Recent Trends and Prospects
Yu, S., & Chen, P.-Y. (2016) · IEEE Solid-State Circuits Magazine · doi:10.1109/mssc.2016.2546199 · Cited by 555
Resistive switching phenomena: A review of statistical physics approaches
Lee, J. S., Lee, S., & Noh, T. W. (2015) · Applied Physics Reviews · doi:10.1063/1.4929512 · Cited by 463
Crossbar RRAM Arrays: Selector Device Requirements During Read Operation
Zhou, J., Kim, K.-H., & Lu, W. (2014) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2014.2310200 · Cited by 310
Crossbar RRAM Arrays: Selector Device Requirements During Write Operation
Kim, S., Zhou, J., & Lu, W. D. (2014) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2014.2327514 · Cited by 219
Research Progress on Memristor: From Synapses to Computing Systems
Yang, X., Taylor, B., Wu, A., Chen, Y., & Chua, L. O. (2022) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2022.3159153 · Cited by 200
Self-citationTechnological Exploration of RRAM Crossbar Array for Matrix-Vector Multiplication
Xia, L., Gu, P., Li, B., Tang, T., Yin, X., Huangfu, W., Yu, S., Cao, Y., Wang, Y., & Yang, H. (2016) · Journal of Computer Science and Technology · doi:10.1007/s11390-016-1608-8 · Cited by 183
“Our simulation results of a support vector machine (SVM) and Mixed National Institute of Standards and Technology (MNIST) pattern recognition dataset show that RRAM crossbar array based SVM is robust to input signal fluctuation but sensitive to tunneling gap deviation.”
MethodComplementary Metal‐Oxide Semiconductor and Memristive Hardware for Neuromorphic Computing
Rahimi Azghadi, M., Chen, Y.-C., Eshraghian, J. K., Chen, J., Lin, C.-Y., Amirsoleimani, A., Mehonic, A., Kenyon, A. J., Fowler, B., Lee, J. C., et al. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.201900189 · Cited by 140
RRAM-Based Analog Approximate Computing
Li, B., Gu, P., Shan, Y., Wang, Y., Chen, Y., & Yang, H. (2015) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2015.2445741 · Cited by 135
“an approximate linear I–V relationship [19].”
A SPICE Model of Resistive Random Access Memory for Large-Scale Memory Array Simulation
Li, H., Huang, P. C., Gao, B., Chen, B., Liu, X., & Kang, J. (2014) · IEEE Electron Device Letters · doi:10.1109/led.2013.2293354 · Cited by 131
“When VR R AM exceeds SET voltage, RRAM cell is switched to low resistance state (LRS) and meanwhile MOSFET is driven towards saturation region.”
BackgroundMethodInfluentialSelf-citationSelf-rectifying resistive memory in passive crossbar arrays
Jeon, K., Kim, J., Ryu, J. J., Yoo, S.-J., Song, C., Yang, M., Jeong, D. S., & Kim, G. H. (2021) · Nature Communications · doi:10.1038/s41467-021-23180-2 · Cited by 145
“Furthermore, the sneak current through unchosen cells, that leads to read-out errors should be considered 22,23 .”
BackgroundA Collective Study on Modeling and Simulation of Resistive Random Access Memory
Panda, D., Sahu, P. P., & Tseng, T. (2018) · Nanoscale Research Letters · doi:10.1186/s11671-017-2419-8 · Cited by 133
Memristive Devices for New Computing Paradigms
Im, I. H., Kim, S. J., & Jang, H. W. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.202000105 · Cited by 129
Soft eSkin: distributed touch sensing with harmonized energy and computing
Soni, M., & Dahiya, R. (2019) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2019.0156 · Cited by 107
“series with the memristors has been explored [109, 122].”
BackgroundMemristive Devices and Networks for Brain‐Inspired Computing
Zhang, T., Ke, Y., Xu, X., Cai, Y., Yang, Y., & Huang, R. (2019) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.201900029 · Cited by 95
Kim, Y. S., Baek, J. H., Im, I. H., Lee, D. H., Park, M. H., & Jang, H. W. (2024) · ACS Nano · doi:10.1021/acsnano.4c12884 · Cited by 75
Technological exploration of RRAM crossbar array for matrix-vector multiplication
Gu, P., Li, B., Tang, T., Yu, S., Cao, Y. K., Wang, Y., & Yang, H. (2015) · Asia and South Pacific Design Automation Conference (ASP-DAC) · doi:10.1109/aspdac.2015.7058989 · Cited by 81
Dongale, T. D., Kamble, G. U., Kang, D. Y., Kundale, S. S., An, H.-M., & Kim, T. G. (2021) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.202100199 · Cited by 65
Shenoy, R. S., Burr, G. W., Virwani, K. R., Jackson, B. L., Padilla, A., Narayanan, P., Rettner, C. T., Shelby, R. M., Bethune, D. S., Raman, K. V., et al. (2014) · Semiconductor Science and Technology · doi:10.1088/0268-1242/29/10/104005 · Cited by 61
Optimized Memristor-Based Multipliers
Guckert, L., & Swartzlander, E. E. (2017) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2016.2606433 · Cited by 60
PCMO-Based RRAM and NPN Bipolar Selector as Synapse for Energy Efficient STDP
Lashkare, S., Panwar, N., Kumbhare, P., Das, B., & Ganguly, U. (2017) · IEEE Electron Device Letters · doi:10.1109/led.2017.2723503 · Cited by 59
“Various 1S1M structure and non-linear RRAM’s have been explored to avoid this leakage [30]–[32].”
BackgroundZinc Tin Oxide Synaptic Device for Neuromorphic Engineering
Ryu, J., Kim, B., Hussain, F. A., Ismail, M., Mahata, C., Oh, T., Imran, M., Min, K. K., Kim, T., Yang, B., et al. (2020) · IEEE Access · doi:10.1109/access.2020.3005303 · Cited by 58
“In particular, RRAM offers fast switching ( ∼ 100 ns), low current operation ( ∼ 1 µ A), and a high-density structure with a crossbar array [28]–[33].”
BackgroundCross-point memory design challenges and survey of selector device characteristics
Peng, X., Madler, R., Chen, P.-Y., & Yu, S. (2017) · Journal of Computational Electronics · doi:10.1007/s10825-017-1062-z · Cited by 53
Chen, Y., Lin, C., Hu, S.-T., Lin, C., Fowler, B. W., & Lee, J. (2019) · Scientific Reports · doi:10.1038/s41598-019-48932-5 · Cited by 53
One-Selector One-Resistor Cross-Point Array With Threshold Switching Selector
Zhang, L., Cosemans, S., Wouters, D. J., Groeseneken, G., Jurczak, M., & Govoreanu, B. (2015) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2015.2461656 · Cited by 51
“Many studies [17]–[21] investigate the impact of selector characteristics on the overall 1S1R array performance, using a top-down approach by the SPICE circuit simulation.”
BackgroundMethodA Novel Read Scheme for Large Size One-Resistor Resistive Random Access Memory Array
Zackriya, V. M., Kittur, H. M., & Chin, A. (2017) · Scientific Reports · doi:10.1038/srep42375 · Cited by 50
An FPGA-Based Hardware Emulator for Neuromorphic Chip With RRAM
Luo, T., Wang, X., Qu, C., Lee, M. K. F., Tang, W. T., Wong, W., & Goh, R. S. M. (2018) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2018.2889670 · Cited by 48
“Despite the advantages of an RRAM-based neuromorphic chip over other computing platforms, there exist many challenges and constraints in the chip design process [12], [13].”
BackgroundDesign of Power- and Variability-Aware Nonvolatile RRAM Cell Using Memristor as a Memory Element
Pal, S., Bose, S., Ki, W., & Islam, A. (2019) · IEEE Journal of the Electron Devices Society · doi:10.1109/jeds.2019.2928830 · Cited by 45
“However, it suffers from several problems in terms of speed, reliability and data-dependent leakage [11].”
BackgroundDesign Tradeoffs of Vertical RRAM-Based 3-D Cross-Point Array
Chen, P.-Y., Li, Z., & Yu, S. (2016) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2016.2553123 · Cited by 45
“The prior works [38], [40]–[42] indicate that in order to improve the write margin, a low IW or a high nonlinearity is needed.”
BackgroundUnderstanding of Selector‐Less 1S1R Type Cu‐Based CBRAM Devices by Controlling Sub‐Quantum Filament
Banerjee, W., & Hwang, H. (2020) · Advanced Electronic Materials · doi:10.1002/aelm.202000488 · Cited by 38
Chemical Nature of Electrode and the Switching Response of RF-Sputtered NbOx Films
Aziz, J., Kim, H., Rehman, S., Khan, M. F., & Kim, D. (2020) · Nanomaterials · doi:10.3390/nano10112164 · Cited by 41
“Resistive Random Access Memories (ReRAMs) are non-volatile memory devices [1,2] which have attracted considerable attention due to their expediency in scalability [3], high endurance [4], low power consumption [5], and high switching speed [6].”
BackgroundDeep Neural Network Optimized to Resistive Memory with Nonlinear Current-Voltage Characteristics
Kim, H., Kim, T., Kim, J.-S., & Kim, J. (2018) · ACM Journal on Emerging Technologies in Computing Systems · doi:10.1145/3145478 · Cited by 42
Numerical study of read scheme in one-selector one-resistor crossbar array
Kim, S., Kim, H., & Choi, S. (2015) · Solid-State Electronics · doi:10.1016/j.sse.2015.08.001 · Cited by 36
“Moreover, although SPICE-based circuit simulation can produce accurate estimates [9,10], it requires high computational power for the simulation of high-density crossbar arrays.”
BackgroundSo, H., Ji, H., Kim, S., & Kim, S. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202405544 · Cited by 59
Chen, B., Wang, X., Gao, B., Fang, Z., Kang, J., Liu, L., Liu, X., Lo, G., & Kwong, D. (2014) · Scientific Reports · doi:10.1038/srep06863 · Cited by 36
Self-citationGimenez, S. P. (2016) · Synthesis lectures on emerging engineering technologies · doi:10.2200/s00704ed1v01y201602eet007 · Cited by 67
Cross-point Resistive Memory: Nonideal Properties and Solutions
Wang, C., Feng, D., Tong, W., Liu, J., Li, Z., Chang, J., Zhang, Y., Wu, B., Xu, J., Zhao, W. J., et al. (2019) · ACM Transactions on Design Automation of Electronic Systems · doi:10.1145/3325067 · Cited by 40
“V nonlinearity can enlarge the read margin [46, 92].”
BackgroundSaini, S., Dwivedi, A., Lodhi, A., Khandelwal, A., & Tiwari, S. P. (2023) · Memories - Materials Devices Circuits and Systems · doi:10.1016/j.memori.2023.100029 · Cited by 39
Kim, H., Kim, S., & Yun, M. J. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.01.345 · Cited by 31
Jang, J., & Subramanian, V. (2017) · Thin Solid Films · doi:10.1016/j.tsf.2017.01.063 · Cited by 31
Resistive random access memory and its applications in storage and nonvolatile logic
Zhu, D., Li, Y., Shen, W., Zhou, Z., Liu, L., & Zhang, X. (2017) · Journal of Semiconductors · doi:10.1088/1674-4926/38/7/071002 · Cited by 35
Hybrid Memristor-CMOS (MeMOS) based Logic Gates and Adder CircuitsPreprint
Singh, T. (2015) · arXiv (Cornell University) · doi:10.48550/arxiv.1506.06735 · Cited by 40
Detection and Coding Schemes for Sneak-Path Interference in Resistive Memory Arrays
Ben-Hur, Y., & Cassuto, Y. (2019) · IEEE Transactions on Communications · doi:10.1109/tcomm.2019.2897762 · Cited by 29
“However, the proposed approach can be used for other selector types as well (e.g. 1S1R) with simple adaptations to the interference model [25].”
BackgroundMethodAnalysis of the row grounding technique in a memristor‐based crossbar array
Dozortsev, A., Goldshtein, I., & Kvatinsky, S. (2017) · International Journal of Circuit Theory and Applications · doi:10.1002/cta.2399 · Cited by 29
“Unlike standard nonvolatile memory cells such as Flash, resistive random-access memory can be smaller, vertically stacked (three-dimensional crossbar array structures [13, 14]), with lower energy and lower read/write latency [15–17].”
BackgroundDevice and Circuit Interaction Analysis of Stochastic Behaviors in Cross-Point RRAM Arrays
Li, H., Huang, P., Gao, B., Liu, X., Kang, J., & Wong, H. ‐. P. (2017) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2017.2766046 · Cited by 32
Self-citationIntroduction to Nanoionic Elements for Information Technology
Waser, R. M., Ielmini, D., Akinaga, H., Shima, H., Wong, H. ‐. P., Yang, J. J., & Yu, S. (2016) · Wiley eBooks · doi:10.1002/9783527680870.ch1 · Cited by 36
Ovonic threshold switching in polycrystalline zinc telluride thin films deposited by RF sputtering
Kim, T., Kim, Y., Lee, I., Lee, D., & Sohn, H. (2019) · Nanotechnology · doi:10.1088/1361-6528/aafe13 · Cited by 29
“highly subject to errors caused by leakage current from a selected cell to its neighboring unselected cells [8].”
BackgroundZhang, L., Cosemans, S., Wouters, D. J., Groeseneken, G., Jurczak, M., & Govoreanu, B. (2015) · IEEE Electron Device Letters · doi:10.1109/led.2015.2427313 · Cited by 26
“The requirements for the RSE are only scarcely addressed [8], [9] and generally concluded that large RHRS(High Resistive State)/RLRS(Low Resistive State) ratio is desired, as this facilitates an easy distinction between the two resistance states.”
BackgroundMemristive switching: physical mechanisms and applications
Mickel, P. R., Lohn, A. J., & Marinella, M. J. (2014) · Modern Physics Letters B · doi:10.1142/s0217984914300038 · Cited by 25
Chen, Z., Schoeny, C., & Dolecek, L. (2019) · IEEE Transactions on Communications · doi:10.1109/tcomm.2019.2948332 · Cited by 25
Self-rectifying resistance switching memory based on a dynamic p–n junction
Wu, C., Li, X., Xu, X., Lee, B. W., Chae, S. C., & Liu, C. (2020) · Nanotechnology · doi:10.1088/1361-6528/abc782 · Cited by 27
Narayanan, P., Burr, G. W., Shenoy, R. S., Stephens, S., Virwani, K. R., Padilla, A., Kurdi, B. N., & Gopalakrishnan, K. (2015) · IEEE Journal of the Electron Devices Society · doi:10.1109/jeds.2015.2442242 · Cited by 26
Memristor Crossbar Circuit for Ternary Content‐Addressable Memory with Fine‐Tuning Operation
Youn, S., Kim, S., Kim, T., Park, J., & Kim, H. (2023) · Advanced Intelligent Systems · doi:10.1002/aisy.202200325 · Cited by 27
Kim, D.-W., Kim, H.-J., Lee, W., Kim, K., Lee, S., Bae, J., Kang, I. M., Kim, K., & Jang, J. (2022) · Materials · doi:10.3390/ma15051943 · Cited by 24
“thin-film transistor, a 1-transistor–1-RRAM (1T–1R) structure, is suggested [18,19].”
Han, R., Huang, P. C., Zhao, Y., Cui, X., Liu, X., & Kang, J. (2018) · Science China Information Sciences · doi:10.1007/s11432-018-9555-8 · Cited by 26
Self-citationAnalysis of Functional Oxide based Selectors for Cross-Point Memories
Aziz, A., Jao, N., Datta, S., & Gupta, S. K. (2016) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2016.2620475 · Cited by 23
“We also consider the distributed resistance and capacitance of WL and BL interconnects in our analysis [28], [37].”
BackgroundMethodKim, H.-J., Kim, D.-W., Lee, W., et al. (2022) · Materials · doi:10.3390/ma15051899 · Cited by 21
“One solution involves the development of a one-transistor–one-RRAM unit structure [15,16].”
BackgroundDesign guidelines for 3D RRAM cross-point architecture
Yu, S., Deng, Y., Gao, B., Huang, P. C., Chen, B., Liu, X., Kang, J., Chen, H.-Y., Jiang, Z., & Wong, H. ‐. P. (2014) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2014.6865155 · Cited by 21
Self-citationAn Offset Readout Current Sensing Scheme for One-Resistor RRAM-Based Cross-Point Array
Chen, Y.-D., & Chin, A. (2018) · IEEE Electron Device Letters · doi:10.1109/led.2018.2886552 · Cited by 21
“8 [16], [18], [19] was used to ensure that the proposed read scheme can still maintain good reading accuracy.”
BackgroundMethodAdvances of Emerging Memristors for In-Memory Computing Applications
Chen, Q., Lin, L., Meng, J., Xu, M., & Wang, T. (2025) · Research · doi:10.34133/research.0916 · Cited by 23
“However, such designs still rely on traditional CMOS processes, which pose certain limitations in terms of circuit area and power consumption [ 94 ].”
Scaling 2-layer RRAM cross-point array towards 10 nm node: A device-circuit co-design
Zuloaga, S., Liu, R., Chen, P.-Y., & Yu, S. (2015) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2015.7168603 · Cited by 20
“For the read operation, a “read-in-arow” scheme is commonly used [11]: a voltage VR is applied to the selected WL and all of the other unselected WLs and BLs are grounded.”
BackgroundMethodInfluentialHsieh, C., Chang, Y., Chen, Y., et al. (2017) · ECS Journal of Solid State Science and Technology · doi:10.1149/2.0041709jss · Cited by 20
Wang, C., Feng, D., Liu, J., Tong, W., Wu, B., & Zhang, Y. (2017) · IEEE International Conference on Computer Design: VLSI in Computers and Processors (ICCD) · doi:10.1109/iccd.2017.50 · Cited by 21
“To find regularities of voltage distribution inside crossbar array, we build a circuit model based on transient analysis for 22 nm technology node [7], [11] according to the International Technology Roadmap for Semiconductors.”
BackgroundMethodBipolar Resistive Switching Behavior in Sol-Gel MgTiNiOxMemory Device
Chang, Y., Lee, K.-J., Lee, C.-J., et al. (2016) · IEEE Journal of the Electron Devices Society · doi:10.1109/jeds.2016.2560879 · Cited by 20
“RRAM is considered one of the most promising candidates for nextgeneration NVM applications, because of its low power operation, simple structure, high-density integration, and high speed operation [1].”
BackgroundKim, K., Lee, C., Lee, W., et al. (2021) · Semiconductor Science and Technology · doi:10.1088/1361-6641/ac3dd3 · Cited by 18
“To solve this issue, an additional selector, such as transistors, should be implemented [27, 28].”
Lee, B. R., Park, J. H., & Kim, T. G. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.153762 · Cited by 18
Ji, H., Kim, S., & Kim, S. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202400895 · Cited by 17
Huang, P. C., Chen, S., Zhao, Y., Chen, B., Gao, B., Liu, L., Chen, Y., Zhang, Z., Bu, W., Wu, H., et al. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2016.2612824 · Cited by 17
“1 [8]–[10].”
Self-citationLee, K.-J., Chang, Y., Lee, C.-J., Wang, L., & Wang, Y. (2018) · IEEE Journal of the Electron Devices Society · doi:10.1109/jeds.2018.2801278 · Cited by 17
A Multilayer Approach to Designing Energy-Efficient and Reliable ReRAM Cross-Point Array System
Mao, M., Chen, P.-Y., Yu, S., & Chakrabarti, C. (2017) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2017.2651647 · Cited by 19
Sol–Gel-Processed Y2O3 Multilevel Resistive Random-Access Memory Cells for Neural Networks
Lee, T., Kim, H.-I., Cho, Y., et al. (2023) · Nanomaterials · doi:10.3390/nano13172432 · Cited by 15
Evaluating Neural Network-Inspired Analog-to-Digital Conversion With Low-Precision RRAM
Cao, W., Ke, L., Chakrabarti, A., & Zhang, X. (2020) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2020.3013563 · Cited by 17
Integration of threshold logic gates with RRAM devices for energy efficient and robust operation
Yang, J., Kulkarni, N., Yu, S., et al. (2014) · IEEE/ACM International Symposium on Nanoscale Architectures (NANOARCH) · doi:10.1109/nanoarch.2014.6880500 · Cited by 14
Optimized memristor-based ripple carry adders
Guckert, L., & Swartzlander, E. E. (2016) · Asilomar Conference on Signals, Systems and Computers (ACSSC) · doi:10.1109/acssc.2016.7869644 · Cited by 16
“Additionally, some of these IMPLY based implementations have come under scrutiny for their complex circuitry and multi-step operation [9,10,11].”
BackgroundWang, C., Feng, D., Tong, W., Liu, J., Wu, B., Zhao, W. J., Zhang, Y., & Chen, Y. (2020) · IEEE Transactions on Computers · doi:10.1109/tc.2020.2990884 · Cited by 15
“The unit Cu line resistance between two adjacent cells is reported to be 2.82 V and 2.93 V at 22 nm and 20 nm technology nodes respectively [20], [21], whereas it increases to 500 k V at 8 nm [22].”
BackgroundInfluentialBhattacharjee, A., & Panda, P. (2022) · ACM Transactions on Design Automation of Electronic Systems · doi:10.1145/3576195 · Cited by 17
Dynamic Computing in Memory (DCIM) in Resistive Crossbar Arrays
Motaman, S., & Ghosh, S. (2018) · IEEE International Conference on Computer Design: VLSI in Computers and Processors (ICCD) · doi:10.1109/iccd.2018.00036 · Cited by 15
Design of resistive random access memory cell and its architecture
Dubey, S. K., & Islam, A. (2019) · Microsystem Technologies · doi:10.1007/s00542-019-04663-1 · Cited by 13
A new bias scheme for a low power consumption ReRAM crossbar array
Sun, W., Choi, S., & Shin, H. (2016) · Semiconductor Science and Technology · doi:10.1088/0268-1242/31/8/085009 · Cited by 13
Tiered-ReRAM: A Low Latency and Energy Efficient TLC Crossbar ReRAM Architecture
Zhang, Y., Feng, D., Tong, W., Liu, J., Wang, C., & Xu, J. (2019) · Digest of papers - IEEE Symposium on Mass Storage Systems · doi:10.1109/msst.2019.00-13 · Cited by 13
“an area of 4F (2), which is the smallest planar cell size [8].”
BackgroundMethodKim, S., Ji, H., Kim, S., & Choi, W. Y. (2024) · Advanced Electronic Materials · doi:10.1002/aelm.202400282 · Cited by 14
Single Event Susceptibility Analysis in CBRAM Resistive Memory Arrays
Mahalanabis, D., Liu, R., Barnaby, H., Yu, S., Kozicki, M. N., Mahmud, A., & DeIonno, E. (2015) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2015.2478382 · Cited by 14
“The 1/3-V scheme has been shown to enable higher read margin than 1/2-V scheme [19].”
MethodImproved Environment Stability of Y2O3 RRAM Devices with Au Passivated Ag Top Electrodes
Kim, H.-I., Lee, T., Lee, W., et al. (2022) · Materials · doi:10.3390/ma15196859 · Cited by 12
“Combining transistors as selectors is a well-known solution to this problem [20,21].”
BackgroundKim, K., Kim, H.-I., Lee, T., et al. (2023) · Semiconductor Science and Technology · doi:10.1088/1361-6641/acbb99 · Cited by 12
“One solution is to combine a transistor with a single RRAM as a selector [20, 21].”
Improved Resistive Switching Observed in Ti/Zr3N2/p-Si Capacitor via Hydrogen Passivation
Bae, D., Lee, D., Kim, S., & Kim, H. (2022) · IEEE Access · doi:10.1109/access.2022.3142368 · Cited by 11
Doowon, L., Bae, D., Sungho, K., & Kim, H. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.04.007 · Cited by 12
Belief Propagation Based Joint Detection and Decoding for Resistive Random Access Memories
Sun, C., Cai, K., Song, G., et al. (2022) · IEEE Transactions on Communications · doi:10.1109/tcomm.2022.3156074 · Cited by 10
Hazra, P., & Jinesh, K. B. (2018) · Nanotechnology · doi:10.1088/1361-6528/aae17c · Cited by 11
“architecture is commonly put forward to address individual bits or devices at a time [9, 10], in which every device is a”
BackgroundSolution to alleviate the impact of line resistance on the crossbar array
Zhu, X. J., Li, Z., Liu, H., Li, Q., Liu, S., Li, N., & Xu, H. (2020) · IET Circuits Devices & Systems · doi:10.1049/iet-cds.2019.0313 · Cited by 9
Kim, I., Woo, J., Hwang, H.-G., Kim, B., & Nahm, S. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2022.02.021 · Cited by 10
Hardware Fault Tolerance for Binary RRAM Crossbars
Chaudhuri, A., Yan, B., Chen, Y., & Chakrabarty, K. (2019) · IEEE International Test Conference (ITC) · doi:10.1109/itc44170.2019.9000179 · Cited by 11
“Resistive randomaccess memory (RRAM) addresses these problems by allowing computation-in-memory [2].”
BackgroundIntegration of threshold logic gates with RRAM devices for energy efficient and robust operation
Yang, J., Kulkarni, N., Yu, S., et al. (2014) · IEEE/ACM International Symposium on Nanoscale Architectures (NANOARCH) · doi:10.1145/2770287.2770298 · Cited by 9
“Two selection elements [14] are connected on both bottom and top electrodes.”
BackgroundModelling resistive and phase-change memory with passive selector arrays: a MATLAB tool
Noori, Y. J., & de Groot, C. H. (2020) · Journal of Computational Electronics · doi:10.1007/s10825-020-01504-7 · Cited by 9
Jagath, A. L., Kumar, T. N., Almurib, H. A. F., & Jinesh, K. B. (2020) · IET Circuits Devices & Systems · doi:10.1049/iet-cds.2019.0480 · Cited by 10
Kim, C. S., Kim, T., Min, K. K., Kim, Y., Kim, S., & Park, B. (2021) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2021.3059182 · Cited by 9
Impact of electrode thermal conductivity on high resistance state level in HfO 2 -based RRAM
Lin, S., Wu, C.-H., Chen, M.-C., Chang, T., Lien, C., Xu, Y., Tseng, Y., Wu, P., Tan, Y., Sun, L.-C., et al. (2020) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/ab92c5 · Cited by 9
Lee, S., Lee, S., Cho, Y., et al. (2024) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2024.109241 · Cited by 8
Investigation of Set/Reset Operations in CMOS-Logic-Compatible Contact Backfilled RRAMs
Chen, H., Chen, H. H., King, Y., & Lin, C. J. (2016) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2016.2582211 · Cited by 9
“Furthermore, RRAM can be arranged in a crossbar array, which can be 3D stacked to further enhance the data storage capacity of compact memory modules [16], [17].”
BackgroundPerla, V. K., Ghosh, S. K., & Mallick, K. (2023) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.2c01686 · Cited by 8
An approximate condition to avoid reverse leakage current in ReRAM crossbar design
Youn, Y., Sim, J., Park, H.-J., et al. (2015) · International SoC Design Conference · doi:10.1109/isocc.2015.7401656 · Cited by 8
“Especially, in the worst scenario of reading an HRS (the selected cell is located in the farthest corner from the source and the sense amplifier while all unselected cells are in LRS [3]), large reverse leakage current flows into the selected BL, reducing the sensing window.”
BackgroundInfluentialShin, S., Byeon, S.-D., Song, J., et al. (2015) · JSTS Journal of Semiconductor Technology and Science · doi:10.5573/jsts.2015.15.6.685 · Cited by 7
“One more advantage of memristors is a possibility that can be implemented by pure memristor array not using any selection devices such as diodes and transistors [8, 9].”
Background
Metadata
- Authors
- Deng, Y., Huang, P., Chen, B., Yang, X., Gao, B., Wang, J., Zeng, L., Du, G., Kang, J., & Liu, X.
- Affiliations
- Peking University (CN)
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2013-02
- Volume
- 60
- Issue
- 2
- Pages
- 719-726
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W2133557550
- Cited by
- 184
- References
- 39
- Citations by year
- 2026: 4 · 2025: 12 · 2024: 10 · 2023: 9 · 2022: 11 · 2021: 17 · 2020: 18 · 2019: 19 · 2018: 13 · 2017: 19 · 2016: 21 · 2015: 19 · 2014: 12
- FWCI
- 6.34
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Electron Devices (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor materials and devices
- Keywords
- resistive random access memory, sneak paths, selector devices, RON, turn-on voltage, conductance, non-volatile memory, array size
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.