A Comprehensive Crossbar Array Model With Solutions for Line Resistance and Nonlinear Device Characteristics
The DOI matches its Crossref record; 16 of the 17 references it cites were found in a registry or an index.
Abstract
This paper presents a comprehensive crossbar array model that incorporates line resistance and nonlinear device characteristics. The model can be solved using matrix algebra and is suitable for statistical analysis. The nonlinear device solution enables the assessment of crossbar arrays with diode or nonlinear select devices. The calculation based on this model shows that voltage and current degradation due to line resistance are not negligible even for small crossbar arrays, which constrains feasible array size. Diode and nonlinear select devices significantly improve the sensing margin of reading operation and the voltage window of writing operation. This model provides a quantitative tool for accurate analysis of crossbar arrays and the evaluation of memory select devices.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In order to avoid voltage loses at the wires of the crossbar, we employed a Dual Side Connection scheme. Despite the increased peripheral circuitry complexity, this scheme improves the voltage delivery to each synapse248 by connecting the two terminals of each wordline to the same input stimuli.”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [248]
In the citing paper
“Such addressing procedure is performed following the VDD/2 approach as it minimizes the line disturbance248.”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [248]
Citations
Cites
Nanoscale Memristor Device as Synapse in Neuromorphic Systems
Jo, S. H., Chang, T., Ebong, I., Bhadviya, B. B., Mazumder, P., & Lu, W. (2010) · Nano Letters · doi:10.1021/nl904092h · Cited by 4,174 · cited 1×
“Crossbar arrays with synaptic junctions are developed to simulate neuromorphic systems [5].”
BackgroundComplementary resistive switches for passive nanocrossbar memories
Linn, E., Rosezin, R., Kügeler, C., & Waser, R. (2010) · Nature Materials · doi:10.1038/nmat2748 · Cited by 1,274
Molecular electronics: from devices and interconnect to circuits and architecture
Stan, M. R., Franzon, P. D., Goldstein, S. C., Lach, J. C., & Ziegler, M. M. (2003) · Proceedings of the IEEE · doi:10.1109/jproc.2003.818327 · Cited by 278
Lee, M.-J., Park, Y., Kang, B.-S., Ahn, S.-E., Lee, C., Kim, K., Xianyu, W., Stefanovich, G., Lee, J.-H., Chung, S.-J., et al. (2007) · 2007 IEEE International Electron Devices Meeting · doi:10.1109/iedm.2007.4419061 · Cited by 224
Fundamental analysis of resistive nano-crossbars for the use in hybrid Nano/CMOS-memory
Flocke, A., & Noll, T. G. (2007) · ESSCIRC 2007 - 33rd European Solid-State Circuits Conference · doi:10.1109/esscirc.2007.4430310 · Cited by 155
Design and analysis of crossbar circuits for molecular nanoelectronics
Ziegler, M. M., & Stan, M. R. (2003) · Proceedings of the 2nd IEEE Conference on Nanotechnology · doi:10.1109/nano.2002.1032256 · Cited by 100
Scaling constraints in nanoelectronic random-access memories
Amsinck, C. J., Spigna, N. H. D., Nackashi, D. P., & Franzon, P. D. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/10/047 · Cited by 81
Cross-point phase change memory with 4F 2 cell size driven by low-contact-resistivity poly-Si diode
Sasago, Kinoshita, Morikawa, Kurotsuchi, Hanzawa, Mine, Shima, Fujisaki, Kume, Moriya, et al. (2009) · Symposium on VLSI Technology · Cited by 76
Kim, G. H., Kim, K. M., Seok, J. Y., Lee, H. J., Cho, D.-Y., Han, J. H., & Hwang, C. S. (2010) · Nanotechnology · doi:10.1088/0957-4484/21/38/385202 · Cited by 46
Yoon, H. S., Baek, I.-G., Zhao, J., Sim, H., Park, M. Y., Lee, H., Oh, G.-H., Shin, J. C., Yeo, I., & Chung, U. (2006) · Symposium on VLSI Technology · Cited by 44
Research works printed but not linked: 1
- chen, 2003, An access-transistor-free (0T/lR) non-volatile resistance random access memory (RRAM) using a novel threshold switching, self-rectifying, IEEE Tech Dig Int Electron Device Meeting, 905
Cited by
Items 101–200 of 230
Wu, B., Liu, Y., Liu, J., Huan, C., Wei, X., Tong, W., & Feng, D. (2024) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2024.3485589 · Cited by 11
“1) Accurate Models: Based on general nodal analysis, the circuit is divided into individual nodes, and the connection relationships between nodes as well as device behaviors are accurately described using SPICE syntax or mathematical formulas, known as the SPICE model or CMs [9], [10], respectively.”
Achieving high precision in analog in-memory computing systems
Mannocci, P., Larelli, G., Bonomi, M., & Ielmini, D. (2026) · npj Unconventional Computing · doi:10.1038/s44335-025-00044-2 · Cited by 14
“…that typically affect the computing accuracy include the line resistance, which causes a voltage (IR) drop along columns and rows of memory arrays 60 – 64 , the line capacitance, which affects computation latency 65 , and device yield, which may result in unrecoverably stuckmemorycells 66…”
Modelling resistive and phase-change memory with passive selector arrays: a MATLAB tool
Noori, Y. J., & de Groot, C. H. (2020) · Journal of Computational Electronics · doi:10.1007/s10825-020-01504-7 · Cited by 9
Lim, H., Sun, W., & Shin, H. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2015.2506598 · Cited by 10
Cao, T., Goh, W. L., & Gao, Y. (2020) · Intelligent Autonomous Systems · doi:10.1109/icoias49312.2020.9081857 · Cited by 10
“Based on the Kirchhoff’s Law, a model can be built to simulation the influence [17].”
MethodModeling of Conduction Mechanism in Filament-Free Multilayer Bulk RRAM
Zhou, Y., Kumar, A., Park, J., Zhang, Y., Zhou, Y. T., Kim, S., Cubukcu, E., & Kuzum, D. (2025) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2024.3521953 · Cited by 9
Reduced HfO₂ Resistive Memory Variability by Inserting a Thin SnO₂ as Oxygen Stopping Layer
Chen, W.-C., Qin, S., Yu, Z., & Wong, H. ‐. P. (2021) · IEEE Electron Device Letters · doi:10.1109/led.2021.3124290 · Cited by 8
Zha, Y., & Li, J. (2018) · ACM SIGPLAN Notices · doi:10.1145/3296957.3173167 · Cited by 9
Han, R., Shen, W., Huang, P. C., Zhou, Z., Liu, L., Liu, X., & Kang, J. (2018) · Japanese Journal of Applied Physics · doi:10.7567/jjap.57.04fe02 · Cited by 8
Chen, A. (2014) · Wiley eBooks · doi:10.1002/9781118958254.ch12 · Cited by 8
Self-citationWALLAX: A memristor-based Gaussian random number generator
Dong, X., Amirsoleimani, A., Azghadi, M. R., & Genov, R. (2023) · Neurocomputing · doi:10.1016/j.neucom.2023.126933 · Cited by 8
Experimental Verification and Evaluation of Non-Stateful Logic Gates in Resistive RAM
Brackmann, L., Ziegler, T., Wouters, D. J., & Menzel, S. (2024) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2024.3486376 · Cited by 8
“However due to parasitic effects, i.e. IR -drops along the interconnecting lines, the voltage applied at each device will depend on its specific position within the crossbar [44], [45].”
Retamal, J. R. D., Kang, C., Yang, P., Lee, C., Lien, D., Ho, C.-H., & He, J. (2014) · Applied Physics Letters · doi:10.1063/1.4901072 · Cited by 8
Capacitor based SneakPath compensation circuit for transistor-less ReRAM architectures
Levisse, A., Giraud, B., Noël, J.-P., Moreau, M., & Portal, J. (2016) · HAL · doi:10.1145/2950067.2950073 · Cited by 7
“2-Steps programming circuits [8] using only the selected WL simplify the periphery and allow the use of all the array polarization schemes presented in the literature [9] [10].”
MethodLimitations and precision requirements for read-out of passive, linear, selectorless RRAM arrays
Serb, A., Redman-White, W., Papavassiliou, C., Berdan, R., & Prodromakis, T. (2015) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2015.7168602 · Cited by 7
“Sneak currents can severely disturb read operations [6], cause unwanted programming of non-target”
BackgroundMethodStrong Read and Write Interference Induced by Breakdown Failure in Crossbar Arrays
Chang, C., Huang, H., Hudec, B., Wu, M.-H., Chang, C.-C., Liu, P., & Hou, T. (2020) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2020.3031551 · Cited by 8
“A 1/3 pull-up scheme was evaluated for write [4]–[5] in this study where 2/3 Vwrite and 1/3 Vwriteare applied to the unselected BLs and WLs, respectively.”
BackgroundMethodThe Impact of Device Uniformity on Functionality of Analog Passively-Integrated Memristive Circuits
Fahimi, Z., Mahmoodi, M. R., Klachko, M., Nili, H., & Strukov, D. B. (2021) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2021.3097282 · Cited by 13
Parasitic-Aware Modelling for Neural Networks Implemented with Memristor Crossbar Array
Cao, T., Liu, C., Gao, Y., & Goh, W. L. (2021) · IEEE International Symposium on Embedded Multicore/Many-core Systems-on-Chip (MCSoC) · doi:10.1109/mcsoc51149.2021.00025 · Cited by 9
Joksas, D., & Mehonić, A. (2020) · SoftwareX · doi:10.1016/j.softx.2020.100617 · Cited by 7
“So naturally, there have been careful analyses of line resistance effects in passive crossbar arrays in the past [9].”
BackgroundHan, L., Huang, P. C., Wang, Y., Zhou, Z., Yang, H., Chen, Y., Liu, X., & Kang, J. (2025) · Science China Information Sciences · doi:10.1007/s11432-023-4021-y · Cited by 7
“Whether solving numerically or iteratively, the evaluation process is time-consuming in the case of large crossbars [38].”
Memristor-Based Analog Recursive Computation Circuit for Linear Programming Optimization
Shang, L., Adil, M., Madani, R., & Pan, C. (2020) · IEEE Journal on Exploratory Solid-State Computational Devices and Circuits · doi:10.1109/jxcdc.2020.2995123 · Cited by 9
“In terms of the crossbar array, we adopt a modeling framework to simulate the node voltages by creating a conductance matrix based on Ohm’s law and Kirchhoff’s current law [21].”
MethodTurning to Information Theory to Bring in-Memory Computing into Practice
Dupraz, E., Leduc-Primeau, F., Cai, K., & Dolecek, L. (2023) · IEEE BITS the Information Theory Magazine · doi:10.1109/mbits.2023.3333798 · Cited by 7
“Nevertheless, Chen [32] has shown that errors are not identically distributed within the crossbar, meaning that the position of a memristor in the crossbar has an in fl uence on the error distribution.”
BackgroundAn efficient method for evaluating RRAM crossbar array performance
Lin, S., Zhang, J., Chen, A., Wu, H., Qian, H., & Yu, Z. (2016) · Solid-State Electronics · doi:10.1016/j.sse.2016.03.004 · Cited by 6
Self-citationAnalysis of VMM Operations on 1S1R Crossbar Arrays and the Influence of Wire Resistances
Ahmad, R. W., Wouters, D. J., Bengel, C., Waser, R. M., & Menzel, S. (2022) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas48785.2022.9937570 · Cited by 6
“Beside these 1S1R devices, the crossbar arrays consist of resistances of the wires that connect these and other devices in the crossbar array to each other [19,20].”
BackgroundStudy on Memristor-Based 3-D Convolutional Neural Network Adapting to Non-Ideal Effects
Dong, B., Li, P., Fu, Y., Chang, T., Li, Y., Miao, X., & He, Y. (2023) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2022.3233552 · Cited by 6
Efficient Memristive Stochastic Differential Equation Solver
Dong, X., Primeau, L., Genov, R., Azghadi, M. R., & Amirsoleimani, A. (2023) · Advanced Intelligent Systems · doi:10.1002/aisy.202300008 · Cited by 5
Investigation on the Worst Read Scenario of a ReRAM Crossbar Array
Youn, Y., Kim, K., Sim, J., Park, H.-J., & Kim, B. (2017) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2017.2710140 · Cited by 6
“Therefore, many researchers [4], [6], [7], [11], [12] simply believed that the farthest corner is the worst position of the selected cell (Fig.”
BackgroundResultInfluentialXBarNet: Computationally Efficient Memristor Crossbar Model Using Convolutional Autoencoder
Zhang, Y., He, G., Wang, G., & Li, Y. (2022) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2022.3163895 · Cited by 6
“Therefore, the effects of interconnect resistance and nonlinear I − V characteristic should be considered to provide more realistic modeling similar to measurement results [24]”
Wang, C., Feng, D., Tong, W., Liu, J., Wu, B., Zhao, W. J., & Zhang, Y. (2019) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2019.2945058 · Cited by 7
Hybrid CMOS/Memristor Circuit Design MethodologyPreprint
Maheshwari, S., Stathopoulos, S., Wang, J., Serb, A., Pan, Y., Mifsud, A., Leene, L. B., Shen, J., Papavassiliou, C., Constandinou, T. G., et al. (2020) · arXiv (Cornell University) · doi:10.48550/arxiv.2012.02267 · Cited by 11
“Early in the design cycle, those can be estimated based on fundamental equations of conductance/capacitance and knowledge of device geometry at the device level (initial values to directly plug into the behavioural device model) [65], [66].”
BackgroundChang, S.-H., Lin, T., & Liu, C. J. (2025) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2025.3566643 · Cited by 5
“To calculate the IR-drop effect on the crossbar array, the typical approach adopts SPICE or SPICE-like tools [8] to calculate the current drop based on Kirchhoff’s current law (KCL) equation.”
Zha, Y., & Li, J. (2018) · International Conference on Architectural Support for Programming Languages and Operating Systems (ASPLOS) · doi:10.1145/3173162.3173167 · Cited by 7
““V/3” write scheme) proposed to write crossbar arrays [13].”
BackgroundTransfer modeling of 1T1R crossbar arrays with line resistances based on matrix algebra method
Zhang, X., Zeng, Y., Yuan, L., & Zhou, L. P. (2021) · Solid-State Electronics · doi:10.1016/j.sse.2021.108220 · Cited by 5
Chen, H.-Y., Brivio, S., Chang, C., Frascaroli, J., Hou, T., Hudec, B., Liu, M., Lv, H., Molas, G., Sohn, J., et al. (2021) · Kluwer international series in electronic materials: science and technology · doi:10.1007/978-3-030-42424-4_3 · Cited by 6
Dong, X., Chen, B., Genov, R., Azghadi, M. R., & Amirsoleimani, A. (2024) · Neurocomputing · doi:10.1016/j.neucom.2024.128275 · Cited by 5
Novel device structure for phase change memory toward low-current operation
Kim, E., Kang, N. S., Yang, H.-J., Sutou, Y., & Song, Y. (2015) · Japanese Journal of Applied Physics · doi:10.7567/jjap.54.094302 · Cited by 5
Recent progress in RRAM technology: From compact models to applications
Zha, Y., Wei, Z., & Li, J. (2017) · China Semiconductor Technology International Conference (CSTIC) · doi:10.1109/cstic.2017.7919731 · Cited by 5
Analytic models for crossbar write operation
Adeyemo, A., Yang, X., Bala, A., & Jabir, A. M. (2016) · International Symposium on Embedded Computing and System Design (ISED) · doi:10.1109/ised.2016.7977104 · Cited by 6
“Ideally, memristor-based memories are resistant to radiation induced soft errors but error might occur while accessing or writing into the memory [1].”
BackgroundA Multi-Memristive Unit-Cell Array With Diagonal Interconnects for In-Memory Computing
Khaddam-Aljameh, R., Martemucci, M., Kersting, B., Gallo, M. L., Bruce, R. L., BrightSky, M. J., & Sebastian, A. (2021) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2021.3078614 · Cited by 5
“This results in limited scalability, decreased reliability and increased programming stochasticity due to state dependent voltage-drop [11].”
BackgroundAnalysis of Leakage Current of HfO2/TaOx-Based 3-D Vertical Resistive Random Access Memory Array
Chen, Z., Song, R., Huo, Q., Ren, Q., Zhang, C., Li, L., & Zhang, F. (2021) · Micromachines · doi:10.3390/mi12060614 · Cited by 6
“However, compared with other work that used the simple analytic approximation model for the array investigation [30,31], our HSPICE simulation method based on modular analysis is more accurate.”
ResultLi, C., Lammie, C., Amirsoleimani, A., Azghadi, M. R., & Genov, R. (2023) · Software Impacts · doi:10.1016/j.simpa.2023.100473 · Cited by 6
Aguirre, F. L., Pazos, S. M., Palumbo, F., Morell, A., Suñé, J., & Miranda, E. A. (2021) · Electronics · doi:10.3390/electronics10192427 · Cited by 5
“Although the former refers to the increase in R L as the fabrication technology scales down [27,28], the latter relates to the non-negligible current flowing through unselected devices [28,29].”
BackgroundMethodInfluentialEmerging Memory Devices: Assessment and Benchmarking
Marinella, M. J., & Zhirnov, V. V. (2014) · Wiley eBooks · doi:10.1002/9781118958254.ch13 · Cited by 5
Device Variability Analysis for Memristive Material ImplicationPreprint
Laube, S. M., & TaheriNejad, N. (2021) · arXiv (Cornell University) · doi:10.48550/arxiv.2101.07231 · Cited by 5
“Many works have been carried out to study effects [25], [34]–[36], or solve them [14], [26], [34], but thus far 1T1R has been the preferred implementation [31]–[33].”
BackgroundKim, J., Woo, H. C., Lee, S., Lee, B. J., Park, T., & Hwang, C. S. (2022) · Advanced Intelligent Systems · doi:10.1002/aisy.202100256 · Cited by 4
Kang, J., Lee, S., Kim, T.-Y., Hu, S., Lee, S., Lee, K., Park, J., Kim, I. H., Hwang, G. W., Kim, S., et al. (2025) · Small · doi:10.1002/smll.202505708 · Cited by 5
Investigation of power dissipation for ReRAM in crossbar array architecture
Sun, W., Lim, H., Shin, H., & Lee, W. (2014) · Non-Volatile Memory Technology Symposium · doi:10.1109/nvmts.2014.7060847 · Cited by 4
“In this paper, power dissipation of large-scale crossbar array architecture is investigated by the comprehensive crossbar array model which can be solved using matrix algebra [4].”
BackgroundMethodOn one step row readout technique of selector-less resistive arrays
Fouda, M. E., Eltawil, A. M., & Kurdahi, F. J. (2017) · IEEE International Midwest Symposium on Circuits and Systems (MWSCAS) · doi:10.1109/mwscas.2017.8052863 · Cited by 4
“Figure 1 shows the histogram of the output voltage of 64× 64 crossbar array with random stored data for 100 runs using a numerical crossbar simulator adopted from [11].”
MethodRecent Progress on Signal Integrity Modeling of Neuromorphic Chips by the PEEC Method
Ma, H., Tao, T., Chen, Q., Li, D., Schutt‐Ainé, J. E., Cangellaris, A. C., & Li, E. (2023) · IEEE Conference on Electrical Performance of Electronic Packaging and Systems (EPEPS) · doi:10.1109/epeps58208.2023.10314875 · Cited by 4
“In early efforts, most circuit modeling of memristor-based neuromorphic chips only focused on accounting for the resistance of the interconnection lines, ignoring the influence of propagation delay and electromagnetic coupling on performance [6-7].”
BackgroundEvaluation of Truly Passive Crossbar Memory Arrays on Short Flow Characterization Vehicle Test Chips
Hess, C., Brożek, T., Schneider, H., Yu, Y., Lunenborg, M. M., Ng, K. H., Ciplickas, D. J., Vallishayee, R. R., Dolainsky, C., & Weiland, L. H. (2019) · IEEE International Conference on Microelectronic Test Structures (ICMTS) · doi:10.1109/icmts.2019.8730984 · Cited by 4
Combination-Encoding Content-Addressable Memory With High Content Density
Kim, G., Kornijčuk, V., Kim, J., Kim, D., Hwang, C. S., & Jeong, D. S. (2019) · IEEE Access · doi:10.1109/access.2019.2942150 · Cited by 4
“notorious sneak current issue due to the lack of bit-selection devices[26].”
BackgroundWrite and Read Channel Models for 1S1R Crossbar Resistive Memory with High Line Resistance
Chen, Z., & Dolecek, L. (2020) · Globecom · doi:10.1109/globecom42002.2020.9322521 · Cited by 4
“The adverse effect of the line resistance on the write/read margins for cells across the memory array are studied in [5], [6] by solving a system of Kirchhoff’s current law (KCL) equations.”
BackgroundMethodLambertini, A., Zanotti, T., Pavan, P., Padovani, A., & Puglisi, F. M. (2025) · APL Machine Learning · doi:10.1063/5.0274233 · Cited by 3
Halide Perovskite Memristor Crossbar Arrays for Low Voltage in Memory Computing
Kim, H. (2025) · Advanced Materials Interfaces · doi:10.1002/admi.202500729 · Cited by 5
FRAM Array: A Device and Circuit Interaction Study at Advanced Technology Nodes
Cui, X., Ye, J., Chen, B., Yu, H., Liu, D., Li, B., Zhou, J., Cheng, R., Yu, X., Liu, Y., et al. (2024) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2024.3514812 · Cited by 3
“…lines, according to the IRDS roadmap, respectively [21]. of FRAM array, where the signals are eventually read on the BLs. Due to the significant impact of the interconnects in the memory array on FRAM’s performance [17], [18], [19], the parasitic effect of the BLs and PLs should be considered.”
Zhang, Z., Cao, T., Liu, S., Jin, H., Wang, W., Yin, X., Liu, C., Goh, W. L., Gao, Y., & Zheng, Y. (2025) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2025.3538578 · Cited by 4
“At the end of charging process, the FeRAM synapses are fully charged, and the array becomes a conductance crossbar array system [38] synapses in the row, the equivalent conductance at V i, n − 1 can be evaluated as where G i,n is the conductance of FeRAM at i th row, n th column and g is the line…”
Feasibility analysis of high-density STTRAM designs with crossbar or shared transistor structures
Chen, A. (2014) · Conference digest · doi:10.1109/drc.2014.6872413 · Cited by 3
Self-citationDesign models of resistive crossbar arrays with selector devices
Ciprut, A., & Friedman, E. G. (2016) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2016.7527474 · Cited by 3
“In [5], a matrix based solution is presented for solving the voltages and currents of each cell within a crossbar array.”
MethodKim, K., Kang, S., Sim, J., Park, H.-J., & Kim, B. (2018) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2018.2855959 · Cited by 3
“In the model, the line resistances of WLs and BLs are modeled as resistors Rline placed between neighbor PCM cells [10].”
Die area recovery to record a resistive memory in a memristive crossbar array
Ali, H., Feng, Z., & Ni, H. (2021) · AEU - International Journal of Electronics and Communications · doi:10.1016/j.aeue.2021.154058 · Cited by 3
Thomas, S. A., Sharma, R., & Das, D. M. (2023) · Memories - Materials Devices Circuits and Systems · doi:10.1016/j.memori.2023.100081 · Cited by 4
Modelling of wire resistance effect in PCM‐based nanocrossbar memory
El‐Hassan, N. H., Kumar, T. N., & Almurib, H. A. F. (2016) · The Journal of Engineering · doi:10.1049/joe.2016.0212 · Cited by 3
New write operation scheme for alleviating effect of line resistance on RRAM crossbar array
Li, J., Xu, H. F., Xing, J., Song, B., Liu, S., Li, Z., Wang, W., Li, Q., & Liu, H. (2016) · IEEE Advanced Information Management, Communicates, Electronic and Automation Control Conference (IMCEC) · doi:10.1109/imcec.2016.7867326 · Cited by 3
“In order to analyze impact of line resistance more easily and intuitively, the value of line resistance is exaggerated referring to the method in [8].”
BackgroundMethodCross Point Test Arrays for Development and Yield Ramp of Emerging Memories
Brożek, T., & Ciplickas, D. J. (2019) · IEEE Electron Devices Technology & Manufacturing Conference (EDTM) · doi:10.1109/edtm.2019.8731138 · Cited by 3
“[10] An Chen, “A Comprehensive Crossbar Array Model With”
BackgroundMitigating Imperfections in Mixed-Signal Neuromorphic CircuitsPreprint
Fahimi, Z., Mahmoodi, M. R., Klachko, M., Nili, H., Kim, H., & Strukov, D. B. (2021) · arXiv (Cornell University) · doi:10.48550/arxiv.2107.04236 · Cited by 6
“The IR drop [45] is neglected in our study because it is nearly impossible to simulate its effect in large-scale neuromorphic systems.”
BackgroundReal-Time Compensation Framework for Large-Scale ReRAM-Based Sparse LU Factorization
Chen, W., Chen, Z., Yu, B., Chen, S., Kang, Y., & Xu, Q. (2025) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2025.3576332 · Cited by 3
“IR-Drop: IR-Drop in RCAs is primarily caused by nonneg-ligible wire resistance as circuit feature sizes shrink, resulting in uneven voltage distribution and decreased read/write accuracy [20].”
Designing Memristive Materials for Artificial Dynamic Intelligence
Kim, Y. S., & Jang, H. W. (2025) · Advanced Intelligent Discovery · doi:10.1002/aidi.202500020 · Cited by 5
Modeling Closed-Loop Analog Matrix Computing Circuits With Interconnect Resistance
Zhou, M., Long, J. L., Luo, Y., & Sun, Z. (2026) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2026.3655157 · Cited by 2
“Specifically, the time complexity increases from approximately O N 3 to around O N 6 [9], [10], making large-scale simulations computationally prohibitive.”
Mechanism and Evaluation of Two-Terminal Ferroelectric-Based Memristive/Memcapacitive Devices
Ahn, H. J., Shin, H. J., Yu, N. K., & Yoon, J. H. (2026) · Electronic Materials Letters · doi:10.1007/s13391-026-00634-7 · Cited by 3
“…sneak path currents, where parasitic conduction through unselected neighboring cells distorts the true readout signal, reducing the signal-to-noise ratio and ultimately degrading overall system reliability while inducing false reads and energy inefficiencies across large-scale arrays [ 128, 129].”
Fast Linear Programming Optimization Using Crossbar-Based Analog Accelerator
Shang, L., Adil, M., Madani, R., & Pan, C. (2020) · IEEE Computer Society Annual Symposium on VLSI · doi:10.1109/isvlsi49217.2020.00057 · Cited by 2
Memristor Crossbar Array Simulation for Deep Learning Applications
Machado, E. D., Vicario, J. L., Miranda, E. A., & Morell, A. (2024) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2024.3415382 · Cited by 2
“If we consider series resistances and the large arrays that are needed in DL architectures, we need to apply Kirchhoff’s Current Law (KCL) at every junction as in [13].”
MethodIn-Memory Transformer Self-Attention Mechanism Using Passive Memristor Crossbar
Cai, J., Kaleem, M. A., Genov, R., Azghadi, M. R., & Amirsoleimani, A. (2024) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas58744.2024.10558182 · Cited by 3
“To simulate our CIM-LSH engine, we implemented a phenomenological metal-oxide memristor model [17] on 0T1R memristor crossbar based on line resistance modeling [18].”
MethodLow-voltage programming of RRAM-based crossbar arrays using MOS parasitic diodes
Maheshwari, S., Serb, A., & Prodromakis, T. (2025) · Frontiers in Nanotechnology · doi:10.3389/fnano.2025.1587700 · Cited by 2
“Biasing schemes (Chen, 2013; Deng et al., 2013; Li et al., 2021), effective at large write and read voltages, constrain leakage by applying some intermediate voltages to all the unselected cells within the array, thus preventing undesired disturbance to the stored data.”
Hu, Q., Kang, T. S., Abbas, H., Lee, T. S., Lee, N. J., Yoon, T., Kim, J., Park, M. R., & Kang, C. J. (2018) · Japanese Journal of Applied Physics · doi:10.7567/jjap.57.086501 · Cited by 2
Line Resistance Impact in Memristor-based Multi Layer Perceptron for Pattern Recognition
Aguirre, F. L., Pazos, S. M., Palumbo, F., Gomez, N., Miranda, E. A., & Suñé, J. (2021) · IEEE Latin American Symposium on Circuits and Systems (LASCAS) · doi:10.1109/lascas51355.2021.9667132 · Cited by 2
Toward A Formalized Approach for Spike Sorting Algorithms and Hardware Evaluation
Zhang, T., Lammie, C., Azghadi, M. R., Amirsoleimani, A., Ahmadi, M. A., & Genov, R. (2022) · IEEE International Midwest Symposium on Circuits and Systems (MWSCAS) · doi:10.1109/mwscas54063.2022.9859357 · Cited by 2
“2021 [26], which is based on existing semipassive crossbar models [24], [27], to simulate the feature extraction stage of the spike sorting pipeline.”
MethodA Code Inversion Encoding Technique to Improve Read Margin of A Cross-Point Phase Change Memory
Kim, K., Kang, S., & Kim, B. (2019) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2019.2909535 · Cited by 2
“1) Read Margin Reduction by Line Resistance: Line resistances of electrodes reduce the read margin of a crosspoint PCM array [2].”
BackgroundBanerjee, W., Lu, N., Li, L., Sun, P., Liu, Q., Lv, H., Long, S., & Liu, M. (2015) · Nanoscale · doi:10.1039/c5nr90037a · Cited by 2
RetractedWang, C., Feng, D., Tong, W., Liu, J., Wu, B., & Chen, Y. (2021) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2021.3123591 · Cited by 2
“Chen [20] proposed a simplified model for 2-”
BackgroundMethodMemristors: Device Modeling, Design and Verification
Datta, K., & Drechsler, R. (2023) · IEEE International Symposium on Smart Electronic Systems (iSES) · doi:10.1109/ises58672.2023.00059 · Cited by 1
HyperXArray: Low-Power and Compact Memristive Architecture for In-Memory Encryption on Edge
Cai, J., Azghadi, M. R., Genov, R., & Amirsoleimani, A. (2025) · IEEE Transactions on Emerging Topics in Computing · doi:10.1109/tetc.2025.3562136 · Cited by 1
“[25]and non-linearlineresistancemodelformalizedbyChen[26].”
Matsui, C., Yamada, A., Misawa, N., & TAKEUCHI, K. (2025) · IEICE Transactions on Fundamentals of Electronics Communications and Computer Sciences · doi:10.1587/transfun.2025vlp0011 · Cited by 1
Kou, J., Wang, G., Wang, S., Lv, Y., Zhang, L., Yu, C., Cui, X., Liu, Y., Xing, W. W., & Kang, W. (2025) · doi:10.1109/iccad66269.2025.11240824 · Cited by 2
“Traditional methods [5, 16] solve Kirchhoff’s current equations to model IR-drop accurately, but their high computational cost limits scalability.”
An analysis of the read margin and power consumption of crossbar ReRAM arrays
Choi, S., Sun, W., Lim, H., & Shin, H. (2015) · IEEE Region 10 Conference (TENCON) · doi:10.1109/tencon.2015.7372853 · Cited by 1
“To investigate the electrical characteristic, MATLAB simulations, which were proposed by [4], were performed for the matrix crossbar array model.”
MethodA Precise Model for Cross-Point Memory Array
Yoshiaki, A. S. A. O., & HORIGUCHI, F. (2015) · IEICE Transactions on Electronics · doi:10.1587/transele.e99.c.119 · Cited by 1
Sun, W., Choi, S., Lim, H., & Shin, H. (2016) · Japanese Journal of Applied Physics · doi:10.7567/jjap.55.04ee10 · Cited by 1
赵, 亮., 高, 世., 张, 圣., 邱, 翔., 杨, 帆., 李, 杰., 陈, 泽., & Zhao, Y. (2021) · Scientia Sinica Informationis · doi:10.1360/ssi-2021-0157 · Cited by 1
Bang, S., Kim, S., Hong, K., Mohanan, K. U., Cho, S., & Choi, W. Y. (2022) · AIP Advances · doi:10.1063/5.0117486 · Cited by 1
Impact of sneak paths on in-memory logic design in memristive crossbars
Datta, K., Deb, A., Kole, A., & Drechsler, R. (2023) · it - Information Technology · doi:10.1515/itit-2023-0020 · Cited by 1
Aguirre, F. L., Piros, E., Kaiser, N., Vogel, T., Petzold, S., Gehrunger, J., Oster, T., Hofmann, K., Hochberger, C., Suñé, J., et al. (2023) · APL Machine Learning · doi:10.1063/5.0143926 · Cited by 3
Qiu, X., Chen, Y., Lin, Y., & Huang, B. (2024) · International Symposium on Integrated Circuit Design and Integrated Systems (ICDIS) · doi:10.1145/3702191.3702197 · Cited by 1
“In circuit design, adding selection transistors to memristor crossbar arrays [ 16 - 18 ] and adopting dual-transistor designs help reduce current interference and prevent operational errors [ 19 - 21 ] .”
Neuromorphic FeRAM-Based Co-Design for Imaging Enhancement in Handheld Photoacoustic Systems
Cao, T., Zhang, Z., Tao, S., Liu, C., Goh, W. L., Zheng, Y., & Gao, Y. (2025) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas56072.2025.11043306 · Cited by 2
Miranda, E. A., Morell, A., Muñoz-Gorriz, J., & Suñé, J. (2019) · Microelectronics Reliability · doi:10.1016/j.microrel.2019.06.019 · Cited by 1
“In addition, as the fabrication technology improves and the device dimensions shrink, the line resistance in CPAs is becoming a serious issue [5,6].”
BackgroundIn-Memory Memristive Transformation Stage of Gaussian Random Number Generator
Dong, X., Amirsoleimani, A., Azghadi, M. R., & Genov, R. (2022) · IEEE International Conference on Omni-layer Intelligent Systems (COINS) · doi:10.1109/coins54846.2022.9855007 · Cited by 2
“All of the tests are carried out using the simulation platform for the memristor crossbar model built based on [12].”
MethodPerformance Evaluation and Improvement of Ferroelectric Field-Effect Transistor Memory
Yu, H. S. (2015) · eScholarship (California Digital Library) · Cited by 1
Channel Models and Coding Solutions for 1S1R Crossbar Resistive Memory with High Line ResistancePreprint
Chen, Z., & Dolecek, L. (2021) · arXiv (Cornell University) · doi:10.48550/arxiv.2104.14011 · Cited by 1
“It is demonstrated in [7] that, when considering the line resistance in resistive memory, the write margins are non-uniform across the array, which leads to non-uniform reliability levels in the memory array.”
BackgroundMethodKalaga, P. S. (2021) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/160030 · Cited by 1
Intégration 3D de dispositifs mémoires résistives complémentaires dans le back end of line du CMOS
Labalette, M. (2018) · theses.fr (ABES) · doi:10.70675/e459eb9az13c6z4404z9c7fz93b386ce4917 · Cited by 1
Mixed-Ionic-Electronic-Conduction (MIEC)-Based Access Devices for 3D Multilayer Crosspoint Memory
Virwani, K. R., Burr, G. W., Narayanan, P., & Kurdi, B. N. (2015) · MRS Proceedings · doi:10.1557/opl.2015.24
A Comprehensive Model for Write Disturbance in Resistive Memory Composed of Cross-Point Array
Yoshiaki, A. S. A. O., & HORIGUCHI, F. (2017) · IEICE Transactions on Electronics · doi:10.1587/transele.e100.c.329
Metadata
- Authors
- Chen, A.
- Affiliations
- GlobalFoundries (United States) (US)
- Corresponding author
- Chen, An
- ORCID
- Chen, An
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2013-04
- Volume
- 60
- Issue
- 4
- Pages
- 1318-1326
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W2150313118
- Cited by
- 230
- References
- 17
- Citations by year
- 2026: 18 · 2025: 19 · 2024: 15 · 2023: 17 · 2022: 17 · 2021: 25 · 2020: 19 · 2019: 14 · 2018: 17 · 2017: 20 · 2016: 17 · 2015: 20 · 2014: 9 · 2013: 3
- FWCI
- 9.79
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Electron Devices (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor materials and devices
- Keywords
- crossbar arrays, line resistance, nonlinear device characteristics, voltage degradation, current degradation, sensing margin, statistical analysis, resistive random access memory
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.