A Comprehensive Crossbar Array Model With Solutions for Line Resistance and Nonlinear Device Characteristics
The DOI matches its Crossref record; 16 of the 17 references it cites were found in a registry or an index.
Abstract
This paper presents a comprehensive crossbar array model that incorporates line resistance and nonlinear device characteristics. The model can be solved using matrix algebra and is suitable for statistical analysis. The nonlinear device solution enables the assessment of crossbar arrays with diode or nonlinear select devices. The calculation based on this model shows that voltage and current degradation due to line resistance are not negligible even for small crossbar arrays, which constrains feasible array size. Diode and nonlinear select devices significantly improve the sensing margin of reading operation and the voltage window of writing operation. This model provides a quantitative tool for accurate analysis of crossbar arrays and the evaluation of memory select devices.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In order to avoid voltage loses at the wires of the crossbar, we employed a Dual Side Connection scheme. Despite the increased peripheral circuitry complexity, this scheme improves the voltage delivery to each synapse248 by connecting the two terminals of each wordline to the same input stimuli.”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [248]
In the citing paper
“Such addressing procedure is performed following the VDD/2 approach as it minimizes the line disturbance248.”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [248]
Citations
Cites
Nanoscale Memristor Device as Synapse in Neuromorphic Systems
Jo, S. H., Chang, T., Ebong, I., Bhadviya, B. B., Mazumder, P., & Lu, W. (2010) · Nano Letters · doi:10.1021/nl904092h · Cited by 4,174 · cited 1×
“Crossbar arrays with synaptic junctions are developed to simulate neuromorphic systems [5].”
BackgroundComplementary resistive switches for passive nanocrossbar memories
Linn, E., Rosezin, R., Kügeler, C., & Waser, R. (2010) · Nature Materials · doi:10.1038/nmat2748 · Cited by 1,274
Molecular electronics: from devices and interconnect to circuits and architecture
Stan, M. R., Franzon, P. D., Goldstein, S. C., Lach, J. C., & Ziegler, M. M. (2003) · Proceedings of the IEEE · doi:10.1109/jproc.2003.818327 · Cited by 278
Lee, M.-J., Park, Y., Kang, B.-S., Ahn, S.-E., Lee, C., Kim, K., Xianyu, W., Stefanovich, G., Lee, J.-H., Chung, S.-J., et al. (2007) · 2007 IEEE International Electron Devices Meeting · doi:10.1109/iedm.2007.4419061 · Cited by 224
Fundamental analysis of resistive nano-crossbars for the use in hybrid Nano/CMOS-memory
Flocke, A., & Noll, T. G. (2007) · ESSCIRC 2007 - 33rd European Solid-State Circuits Conference · doi:10.1109/esscirc.2007.4430310 · Cited by 155
Design and analysis of crossbar circuits for molecular nanoelectronics
Ziegler, M. M., & Stan, M. R. (2003) · Proceedings of the 2nd IEEE Conference on Nanotechnology · doi:10.1109/nano.2002.1032256 · Cited by 100
Scaling constraints in nanoelectronic random-access memories
Amsinck, C. J., Spigna, N. H. D., Nackashi, D. P., & Franzon, P. D. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/10/047 · Cited by 81
Cross-point phase change memory with 4F 2 cell size driven by low-contact-resistivity poly-Si diode
Sasago, Kinoshita, Morikawa, Kurotsuchi, Hanzawa, Mine, Shima, Fujisaki, Kume, Moriya, et al. (2009) · Symposium on VLSI Technology · Cited by 76
Kim, G. H., Kim, K. M., Seok, J. Y., Lee, H. J., Cho, D.-Y., Han, J. H., & Hwang, C. S. (2010) · Nanotechnology · doi:10.1088/0957-4484/21/38/385202 · Cited by 46
Yoon, H. S., Baek, I.-G., Zhao, J., Sim, H., Park, M. Y., Lee, H., Oh, G.-H., Shin, J. C., Yeo, I., & Chung, U. (2006) · Symposium on VLSI Technology · Cited by 44
Research works printed but not linked: 1
- chen, 2003, An access-transistor-free (0T/lR) non-volatile resistance random access memory (RRAM) using a novel threshold switching, self-rectifying, IEEE Tech Dig Int Electron Device Meeting, 905
Cited by
Hardware implementation of memristor-based artificial neural networks
Aguirre, F., Sebastian, A., Le Gallo, M., Song, W., Wang, T., Yang, J. J., Lu, W., Chang, M.-F., Ielmini, D., Yang, Y., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-45670-9 · Cited by 564
“Despite the increased peripheral circuitry complexity, this scheme improves the voltage delivery to each synapse 248 by connecting the two terminals of each wordline to the same input stimuli.”
InfluentialAccess devices for 3D crosspoint memory
Burr, G. W., Shenoy, R. S., Virwani, K., Narayanan, P., Padilla, A., Kurdi, B., & Hwang, H. (2014) · Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena · doi:10.1116/1.4889999 · Cited by 371
Compact Modeling of RRAM Devices and Its Applications in 1T1R and 1S1R Array Design
Chen, P.-Y., & Yu, S. (2015) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2015.2492421 · Cited by 364
“well-known sneak path problem in the cross-point architecture [8], [9].”
BackgroundMemory materials and devices: From concept to application
Zhang, Z., Wang, Z., Shi, T., Bi, C., Rao, F., Cai, Y., Liu, Q., Wu, H., & Zhou, P. (2020) · InfoMat · doi:10.1002/inf2.12077 · Cited by 258
Crossbar RRAM Arrays: Selector Device Requirements During Write Operation
Kim, S., Zhou, J., & Lu, W. D. (2014) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2014.2327514 · Cited by 219
“Although several quantitative analyses of crossbar array architecture for read operation have been recently conducted [11]–[13], the study of the write operation for the three types of 1S1R systems has not yet been reported.”
BackgroundRasch, M. J., Mackin, C., Le Gallo, M., Chen, A., Fasoli, A., Odermatt, F., Li, N., Nandakumar, S. R., Narayanan, P., Tsai, H., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-40770-4 · Cited by 213
“In a physical crossbar, however, IR-drops imposed by finite wire resistance cause the bitline voltage to vary [13], especially as instantaneous currents get large.”
BackgroundSelf-citationRealization of Boolean Logic Functionality Using Redox‐Based Memristive Devices
Siemon, A., Breuer, T., Aslam, N., Ferch, S., Kim, W., van den Hurk, J., Rana, V., Hoffmann‐Eifert, S., Waser, R. M., Menzel, S., et al. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500865 · Cited by 146
Park, J., Kumar, A., Zhou, Y., Oh, S., Kim, J. H., Shi, Y., Jain, S., Hota, G., Qiu, E., Nagle, A. L., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-46682-1 · Cited by 171
“As the resistance approaches the interconnect resistance 20 , it constrains the array size and parallel multiply & accumulate (MAC) operations.”
A Complementary Resistive Switch-Based Crossbar Array Adder
Siemon, A., Menzel, S., Waser, R. M., & Linn, E. (2015) · IEEE Journal on Emerging and Selected Topics in Circuits and Systems · doi:10.1109/jetcas.2015.2398217 · Cited by 125
“, [19]) is applied, so that there are three different voltage levels available at the word- and bitlines, low, high, and ground.”
BackgroundTrilayer Tunnel Selectors for Memristor Memory Cells
Choi, B. J., Zhang, J., Norris, K., Gibson, G., Kim, K. M., Jackson, W., Zhang, M. M., Li, Z., Yang, J. J., & Williams, R. S. (2016) · Advanced Materials · doi:10.1002/adma.201503604 · Cited by 120
Chen, H.-Y., Brivio, S., Chang, C., Frascaroli, J., Hou, T., Hudec, B., Liu, M., Lv, H., Molas, G., Sohn, J., et al. (2017) · Journal of Electroceramics · doi:10.1007/s10832-017-0095-9 · Cited by 113
Agarwal, S., Quach, T.-T., Parekh, O., Hsia, A. H., DeBenedictis, E. P., James, C. D., Marinella, M. J., & Aimone, J. B. (2016) · Frontiers in Neuroscience · doi:10.3389/fnins.2015.00484 · Cited by 96
“Therefore, industry is developing resistive memories to use as a digital replacement for flash memory (Jo et al., 2009; Chen, 2013; Chen et al., 2014; Cong et al., 2015).”
BackgroundModeling and Analysis of Passive Switching Crossbar Arrays
Fouda, M. E., Eltawil, A. M., & Kurdahi, F. (2018) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2017.2714101 · Cited by 81
“In [36], the switching device nonlinearity is defined by η = R(0)/R(Vdd ) where η is the nonlinearity ratio, R(0) and R(V dd) are the resistances corresponding to zero and Vdd voltages across device.”
BackgroundInfluentialMemTorch: An Open-source Simulation Framework for Memristive Deep Learning Systems
Lammie, C., Xiang, W., Linares-Barranco, B., & Azghadi, M. R. (2022) · Neurocomputing · doi:10.1016/j.neucom.2022.02.043 · Cited by 107
“MemTorch utilizes a comprehensive crossbar array model with solutions for source and line resistances, as described in [53], to solve for node voltages V , within passive crossbar architectures in each simulation time-step.”
Banerjee, W., Zhang, X., Luo, Q., Lv, H., Liu, Q., Long, S., & Liu, M. (2018) · Advanced Electronic Materials · doi:10.1002/aelm.201700561 · Cited by 80
Ryu, J., Hussain, F. A., Mahata, C., Ismail, M., Abbas, Y., Kim, M., Choi, C., Park, B., & Kim, S. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.147167 · Cited by 80
Phase-Change Memory for In-Memory Computing
Syed, G. S., Gallo, M. L., & Sebastian, A. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00670 · Cited by 97
Using the IBM analog in-memory hardware acceleration kit for neural network training and inference
Gallo, M. L., Lammie, C., Büchel, J., Carta, F., Fagbohungbe, O. I., Mackin, C., Tsai, H.-Y. S., Narayanan, V., Sebastian, A., Maghraoui, K. E., et al. (2023) · APL Machine Learning · doi:10.1063/5.0168089 · Cited by 100
Design of Ternary Neural Network With 3-D Vertical RRAM Array
Li, Z., Chen, P.-Y., Xu, H., & Yu, S. (2017) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2017.2697361 · Cited by 70
Kim, Y. S., Baek, J. H., Im, I. H., Lee, D. H., Park, M. H., & Jang, H. W. (2024) · ACS Nano · doi:10.1021/acsnano.4c12884 · Cited by 75
Jang, J., Gi, S., Yeo, I., Choi, S., Jang, S., Ham, S., Lee, B., & Wang, G. (2022) · Advanced Science · doi:10.1002/advs.202201117 · Cited by 68
Skaja, K., Andrä, M., Rana, V., Waser, R. M., Dittmann, R., & Baeumer, C. (2018) · Scientific Reports · doi:10.1038/s41598-018-28992-9 · Cited by 64
Shenoy, R. S., Burr, G. W., Virwani, K. R., Jackson, B. L., Padilla, A., Narayanan, P., Rettner, C. T., Shelby, R. M., Bethune, D. S., Raman, K. V., et al. (2014) · Semiconductor Science and Technology · doi:10.1088/0268-1242/29/10/104005 · Cited by 61
“It can be readily shown [14] that it is nearly impossible to implement a crossbar array of any practical size without a strong nonlinearity at each node —we will not repeat such analyses here.”
BackgroundModeling and Compensation of IR Drop in Crosspoint Accelerators of Neural Networks
Lepri, N., Baldo, M., Mannocci, P., Glukhov, A., Milo, V., & Ielmini, D. (2022) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2022.3141987 · Cited by 61
Jiang, Y., Huang, P. C., Zhu, D., Zhou, Z., Han, R., Liu, L., Liu, X., & Kang, J. (2018) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2018.2812419 · Cited by 62
“To avoid unintended switching of RRAM cells in a transistor-free crossbar array, we may adopt a 1/3 voltage operation scheme [27], as shown in Fig.”
MethodMemory selector devices and crossbar array design: a modeling-based assessment
Chen, A. (2017) · Journal of Computational Electronics · doi:10.1007/s10825-017-1059-7 · Cited by 59
Self-citationA Compact Model of Analog RRAM With Device and Array Nonideal Effects for Neuromorphic Systems
Liao, Y., Gao, B., Xu, F., Yao, P., Chen, J., Zhang, W., Tang, J., Wu, H., & Qian, H. (2020) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2020.2975314 · Cited by 53
“Although some compact models or fast analysis methods have been proposed for memory arrays [20]–[22], there have been few reports about modeling a parallel computing array, which suffers more from the IR-drop effect.”
MethodMemristive, Spintronic, and 2D‐Materials‐Based Devices to Improve and Complement Computing Hardware
Joksas, D., AlMutairi, A. A., Lee, O., Cubukcu, M., Lombardo, A., Kurebayashi, H., Kenyon, A. J., & Mehonić, A. (2022) · Advanced Intelligent Systems · doi:10.1002/aisy.202200068 · Cited by 55
“V nonlinearity [126, 127] and line resistance [128–130].”
One-Selector One-Resistor Cross-Point Array With Threshold Switching Selector
Zhang, L., Cosemans, S., Wouters, D. J., Groeseneken, G., Jurczak, M., & Govoreanu, B. (2015) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2015.2461656 · Cited by 51
Liu, G., Wu, L., Chen, X., Li, T., Wang, Y., Guo, T., Ma, Z., Zhu, M., Song, S., & Song, Z. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.04.041 · Cited by 49
Banerjee, W., Cai, W. F., Zhao, X., Liu, Q., Lv, H., Long, S., & Liu, M. (2017) · Nanoscale · doi:10.1039/c7nr06628g · Cited by 47
In-Memory Computing for Machine Learning and Deep Learning
Lepri, N., Glukhov, A., Cattaneo, L., Farronato, M., Mannocci, P., & Ielmini, D. (2023) · IEEE Journal of the Electron Devices Society · doi:10.1109/jeds.2023.3265875 · Cited by 59
“The output current I i at the i th row is thus given by: where G i , j is the conductance of the memory device at a certain position i , j , V j the voltage applied at the j th column and N is the number of columns and rows [10], [93].”
BackgroundAnalysis of Partial Bias Schemes for the Writing of Crossbar Memory Arrays
Chen, A. (2015) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2015.2448592 · Cited by 46
“Based on a comprehensive CBA model [3], this paper provides a”
MethodSelf-citationComplementary Switching in 3D Resistive Memory Array
Banerjee, W., Xu, X., Lv, H., Liu, Q., Long, S., & Liu, M. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201700287 · Cited by 46
SIXOR: Single-Cycle In-Memristor XOR
TaheriNejad, N. (2021) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2021.3062293 · Cited by 45
“Therefore, many researchers in the community have tried to study [55]–[58] and tackle [26], [54], [56] this problem.”
BackgroundSeizure Detection and Prediction by Parallel Memristive Convolutional Neural Networks
Li, C., Lammie, C., Dong, X., Amirsoleimani, A., Azghadi, M. R., & Genov, R. (2022) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2022.3185584 · Cited by 55
Design Tradeoffs of Vertical RRAM-Based 3-D Cross-Point Array
Chen, P.-Y., Li, Z., & Yu, S. (2016) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2016.2553123 · Cited by 45
“Compared with other works [37], [38], where the even simpler analytic approximation model is used for cross-point array design, our approach based on full-array HSPICE simulation is already much more accurate.”
BackgroundResultZhou, X. Y., Zhao, L., Yan, C., Zhen, W., Lin, Y., Li, L., Du, G., Lu, L., Zhang, S., Lu, Z., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-39033-z · Cited by 52
Aguirre, F. L., Pazos, S. M., Palumbo, F., Sune, J., & Miranda, E. (2020) · IEEE Access · doi:10.1109/access.2020.3035638 · Cited by 36
Levisse, A., Giraud, B., Noël, J.-P., Moreau, M., & Portal, J. (2015) · Non-Volatile Memory Technology Symposium · doi:10.1109/nvmts.2015.7457426 · Cited by 36
“To reduce the SP issues, non-linear RRAM devices have been intensively studied [5].”
BackgroundNumerical study of read scheme in one-selector one-resistor crossbar array
Kim, S., Kim, H., & Choi, S. (2015) · Solid-State Electronics · doi:10.1016/j.sse.2015.08.001 · Cited by 36
“Another problem with many of the previous studies is that they were conducted using too simplified of an analytical approach in which only portions of the sneak current path were considered [8], or, conversely, that they used overly analytical methods involving matrix algebra [11].”
MethodJiang, Y., Kang, J., & Wang, X. (2017) · Scientific Reports · doi:10.1038/srep45233 · Cited by 34
Cross-point Resistive Memory: Nonideal Properties and Solutions
Wang, C., Feng, D., Tong, W., Liu, J., Li, Z., Chang, J., Zhang, Y., Wu, B., Xu, J., Zhao, W. J., et al. (2019) · ACM Transactions on Design Automation of Electronic Systems · doi:10.1145/3325067 · Cited by 40
“(l ) All-connected [18].”
BackgroundLiao, Y. B., Gao, B., Yao, P., Zhang, W., Tang, J., Wu, H., & Qian, H. (2020) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2020.3021309 · Cited by 34
Modeling and Mitigating the Interconnect Resistance Issue in Analog RRAM Matrix Computing Circuits
Luo, Y., Wang, S., Zuo, P., Sun, Z., & Huang, R. (2022) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2022.3199453 · Cited by 31
“To evaluate the performance of MVM with interconnect resistances, SPICE simulation is realized by solving a linear system of 2 nm unknowns corresponding to the 2 nm nodes in the circuit, resulting in a time complexity of O n 3 m 3 [26].”
BackgroundMethodChen, A. (2013) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.2013.6724723 · Cited by 33
Self-citationHyper-Ap: Enhancing Associative Processing Through A Full-Stack Optimization
Zha, Y., & Li, J. (2020) · Proceedings - International Symposium on Computer Architecture/Proceedings · doi:10.1109/isca45697.2020.00074 · Cited by 57
Device and Circuit Interaction Analysis of Stochastic Behaviors in Cross-Point RRAM Arrays
Li, H., Huang, P., Gao, B., Liu, X., Kang, J., & Wong, H. ‐. P. (2017) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2017.2766046 · Cited by 32
“Write access voltage (WAV) is defined as the actual voltage drop on the selected cell in a memory array, which is lower than the array voltage supply V DD due to interconnect IR drop [29], [35], [36].”
BackgroundMethodKhaddam-Aljameh, R., Francese, P. A., Benini, L., & Eleftheriou, E. S. (2020) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2020.3037871 · Cited by 34
“In addition, the large-scale current summations require wide and highly conductive bit-lines, which leads to a reduced area efficiency [13].”
BackgroundPractical Determination of Individual Element Resistive States in Selectorless RRAM Arrays
Serb, A., Redman-White, W., Papavassiliou, C., & Prodromakis, T. (2015) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2015.2476296 · Cited by 29
“This reduces the crossbar network to a “four-node-fourcomponent” (4n4c) system where the four components are: 1) the target device alone , 2) the devices sharing word-line with the target (we shall call this the “word complement” of ) with equivalent resistance , 3) the devices sharing bit-line with the target (the “b…”
BackgroundIntroduction to Nanoionic Elements for Information Technology
Waser, R. M., Ielmini, D., Akinaga, H., Shima, H., Wong, H. ‐. P., Yang, J. J., & Yu, S. (2016) · Wiley eBooks · doi:10.1002/9783527680870.ch1 · Cited by 36
Cao, T., Liu, C., Gao, Y., & Goh, W. L. (2022) · IEEE Journal on Emerging and Selected Topics in Circuits and Systems · doi:10.1109/jetcas.2022.3172170 · Cited by 27
Zhang, L., Cosemans, S., Wouters, D. J., Groeseneken, G., Jurczak, M., & Govoreanu, B. (2015) · IEEE Electron Device Letters · doi:10.1109/led.2015.2427313 · Cited by 26
Narayanan, P., Burr, G. W., Shenoy, R. S., Stephens, S., Virwani, K. R., Padilla, A., Kurdi, B. N., & Gopalakrishnan, K. (2015) · IEEE Journal of the Electron Devices Society · doi:10.1109/jeds.2015.2442242 · Cited by 26
“1) Use SPICE [6], [7] or another framework [8] capable of modeling non-linear ADs and NVMs; 2) Consider both write and read operations selfconsistently, addressing the constraints for each; 3) Consider large array sizes (∼1Mb or higher); 4) Account for interconnect resistance, which becomes important at higher (write)…”
BackgroundMethodImpact of threshold voltage variation on 1S1R crossbar array with threshold switching selectors
Song, B., Xu, H. F., Liu, H., & Li, Q. (2017) · Applied Physics A · doi:10.1007/s00339-017-0973-7 · Cited by 26
Design Flow for Hybrid CMOS/Memristor Systems—Part I: Modeling and Verification Steps
Maheshwari, S., Stathopoulos, S., Wang, J., Serb, A., Pan, Y., Mifsud, A., Leene, L. B., Shen, J., Papavassiliou, C., Constandinou, T. G., et al. (2021) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2021.3122343 · Cited by 30
“Early in the design cycle, those can be estimated based on fundamental equations of conductance/capacitance and knowledge of device geometry at the device level (initial values to directly plug into the behavioural device model) [45], [46].”
BackgroundThomas, S. A., Vohra, S. K., Kumar, R., Sharma, R., & Das, D. M. (2022) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2022.3190903 · Cited by 24
Han, R., Huang, P. C., Zhao, Y., Cui, X., Liu, X., & Kang, J. (2018) · Science China Information Sciences · doi:10.1007/s11432-018-9555-8 · Cited by 26
Intrinsic Bounds for Computing Precision in Memristor-Based Vector-by-Matrix Multipliers
Mahmoodi, M. R., Vincent, A. F., Nili, H., & Strukov, D. B. (2020) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2020.2992493 · Cited by 28
“Finally, some works explored the impact of non-idealities in the context of specific applications, such as for neuromorphic computing [10], [11], which is typically much more resilient to precision errors, or digital memory [12].”
BackgroundNonlinearity and Asymmetry for Device Selection in Cross-Bar Memory Arrays
Chen, A. (2015) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2015.2450712 · Cited by 27
“The methodology to solve CBAs with both types of selectors is the same [8].”
BackgroundMethodInfluentialSelf-citationArchitecture, design and technology guidelines for crosspoint memories
Levisse, A., Royer, P., Giraud, B., Noel, J. P., Moreau, M., & Portal, J. M. (2017) · IEEE/ACM International Symposium on Nanoscale Architectures (NANOARCH) · doi:10.1109/nanoarch.2017.8053733 · Cited by 22
Lee, Y. K., Jeon, J. W., Park, E.-S., Yoo, C., Kim, W., Ha, M., & Hwang, C. S. (2019) · Micromachines · doi:10.3390/mi10050306 · Cited by 22
“More details are available in [13] although the structure of the matrices A , B , C , D , EWL and EBL depends on the order of the Kirchhoff’s equations that correspond to the individual junctions.”
BackgroundMethodInfluentialYu, M., Fang, Y., Wang, Z., Pan, Y., Li, M., Cai, Y., & Huang, R. (2016) · Journal of Applied Physics · doi:10.1063/1.4951007 · Cited by 21
Towards a 3D GeSbTe phase change memory with integrated selector by non-aqueous electrodeposition
Huang, R., Kissling, G. P., Kashtiban, R. J., Noori, Y. J., Cicvarić, K., Zhang, W., Hector, A. L., Beanland, R., Smith, D. C., Reid, G., et al. (2018) · Faraday Discussions · doi:10.1039/c8fd00126j · Cited by 21
Sneak Path Characterization in Memristor Crossbar Circuits
Joshi, R., & Acken, J. M. (2020) · International Journal of Electronics · doi:10.1080/00207217.2020.1843716 · Cited by 20
“Also, the formula for sneak path calculation derived in (Chen, 2013) is based on equal values of memristors.”
BackgroundMethodDynamic resistive switching devices for neuromorphic computing
Wu, Y., Wang, X., & Lu, W. D. (2021) · Semiconductor Science and Technology · doi:10.1088/1361-6641/ac41e4 · Cited by 24
“The highly non-linear selectors provide the nonlinearity required for the sensing margin [75].”
An FPGA-based system for generalised electron devices testing
Foster, P., Huang, J., Serb, A., Stathopoulos, S., Papavassiliou, C., & Prodromakis, T. (2022) · Scientific Reports · doi:10.1038/s41598-022-18100-3 · Cited by 27
“This, in turn, has implied significant circuit design effort to mitigate effects related to sneak paths [13], which were shown to lead to potentially catastrophically undermine read-out accuracy via a variety of imperfection mechanisms [14], [15].”
Wang, C., Feng, D., Liu, J., Tong, W., Wu, B., & Zhang, Y. (2017) · IEEE International Conference on Computer Design: VLSI in Computers and Processors (ICCD) · doi:10.1109/iccd.2017.50 · Cited by 21
“Instead of directly solving the system of nonlinear equations, we employ the linear model [16] and use the iterative convergence method [9] to accelerate the solving procedure.”
BackgroundMethodCurrent opinions on memristor-accelerated machine learning hardware
Jiang, M., Xu, Y., Li, Z., & Li, C. (2025) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2025.101226 · Cited by 28
An FPGA-Based Instrument for En-Masse RRAM Characterization With ns Pulsing Resolution
Xing, J., Serb, A., Khiat, A., Berdan, R., Xu, H., & Prodromakis, T. (2016) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2016.2538039 · Cited by 19
“simplifies analysis [9] and is based on a connectivity feature employed by most, common crossbar biasing schemes [10].”
BackgroundMethodCompensating for Parasitic Voltage Drops in Resistive Memory Arrays
Agarwal, S., Schiek, R., & Marinella, M. J. (2017) · IEEE International Memory Workshop (IMW) · doi:10.1109/imw.2017.7939075 · Cited by 19
Modeling Size Limitations of Resistive Crossbar Array With Cell Selectors
Ciprut, A., & Friedman, E. G. (2016) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2016.2570120 · Cited by 19
“In [8], a matrix-based theoretical solution is presented for solving the voltages and currents of each cell within a crossbar array.”
BackgroundLee, D. H., Kim, J. E., Cho, Y. H., Kim, S., Park, G. H., Choi, H., Lee, S. Y., Kwon, T., Kim, D. H., Jeong, M., et al. (2024) · Materials Horizons · doi:10.1039/d4mh00519h · Cited by 19
Huang, P. C., Chen, S., Zhao, Y., Chen, B., Gao, B., Liu, L., Chen, Y., Zhang, Z., Bu, W., Wu, H., et al. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2016.2612824 · Cited by 17
“1 [8]–[10].”
SPICE Simulation of RRAM-Based Cross-Point Arrays Using the Dynamic Memdiode Model
Aguirre, F. L., Pazos, S. M., Palumbo, F., Suñé, J., & Miranda, E. A. (2021) · Frontiers in Physics · doi:10.3389/fphy.2021.735021 · Cited by 17
“The process takes place inside the dielectric fi lm of a metal-insulator-metal (MIM) structure and it is caused by the application of an external electrical stimulus [41 – 44].”
BackgroundMethodInfluentialImpact of Lateral SnO2 Nanofilm Channel Geometry on a 1024 Crossbar Chemical Sensor Array
Honda, H., Takahashi, T., Shiiki, Y., Zeng, H., Nakamura, K., Nagata, S., Hosomi, T., Tanaka, W., Zhang, G., Kanai, M., et al. (2022) · ACS Sensors · doi:10.1021/acssensors.1c02173 · Cited by 16
On Pairing of Bipolar RRAM Memory With NPN Selector Based on Set/Reset Array Power Considerations
Mandapati, R., Borkar, A., Srinivasan, V. S. S., Bafna, P., Karkare, P., Lodha, S., Rajendran, B., & Ganguly, U. (2013) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2013.2284508 · Cited by 15
“employ the 1S1M architecture, where each cross point consists of a selector (1S) in series with a memory element (1M) [7].”
MethodRedox-based memristive metal-oxide devices
Baeumer, C., & Dittmann, R. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-811166-6.00020-0 · Cited by 17
Aguirre, F. L., Gomez, N. M., Pazos, S. M., Palumbo, F., Suñé, J., & Miranda, E. (2021) · Journal of Low Power Electronics and Applications · doi:10.3390/jlpea11010009 · Cited by 14
Fast Algorithms for Exact IR Drop De-Embedding in Analog Multiply–Accumulate Computing
Gao, S., Yang, F., Lu, C., & Zhao, Y. (2022) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2022.3197105 · Cited by 13
“This is the well-known IR drop issue as initially discovered in the memory operation of crossbar [6].”
BackgroundTang, Z., Wang, Y., Chi, Y., & Fang, L. (2018) · Electronics · doi:10.3390/electronics7100224 · Cited by 14
“As reported in previous studies, with finite interconnection resistance, the voltage and current delivered to the selected cell would differ depending on the location [19,20].”
An Efficient Programming Framework for Memristor-based Neuromorphic Computing
Zhang, G. L., Li, B., Huang, X., Shen, C., Zhang, S., Burcea, F., Graeb, H., Ho, T.-Y., Li, H. H., & Schlichtmann, U. (2021) · Design, Automation, and Test in Europe · doi:10.23919/date51398.2021.9474084 · Cited by 14
“To consider the effects of IR-drop on the selected rows, we adopt the Modified Nodal Analysis (MNA) [26] with the wire resistances set according to [27] to establish the relation between the real applied voltages on memristors and voltage sources on vertical bitlines.”
MethodEmerging memory selector devices
Chen, A. (2013) · Non-Volatile Memory Technology Symposium · doi:10.1109/nvmts.2013.6851049 · Cited by 19
Self-citationRead Challenges in Crossbar Memories With Nanoscale Bidirectional Diodes and ReRAM Devices
Li, Y., Chen, W., Lu, W., & Jha, R. (2015) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2015.2403772 · Cited by 13
“Chen did further research using matrix algebra for statistical analysis of the role of CBA line resistance on CBA read sensing margin with linear or non-linear devices [19].”
MethodUsing Programmable Graphene Channels as Weights in Spin-Diffusive Neuromorphic Computing
Hu, J., Stecklein, G., Anugrah, Y., Crowell, P. A., & Koester, S. J. (2018) · IEEE Journal on Exploratory Solid-State Computational Devices and Circuits · doi:10.1109/jxcdc.2018.2825299 · Cited by 15
“Cross-bar architectures [6] using phase change (PC) devices [7] and magnetic tunnel junctions (MTJs) [8] have been studied as dense synapse arrays, where the weights are programmed as the charge resistance along the current path.”
BackgroundA new bias scheme for a low power consumption ReRAM crossbar array
Sun, W., Choi, S., & Shin, H. (2016) · Semiconductor Science and Technology · doi:10.1088/0268-1242/31/8/085009 · Cited by 13
Quasi-Analytical Model of 3-D Vertical-RRAM Array Architecture for MB-Level Design
Li, Z., Chen, P.-Y., Liu, H., Li, Q., Xu, H. F., & Yu, S. (2017) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2017.2665642 · Cited by 13
“D cross-point arrays [10]–[12].”
Memory Technology: Development, Fundamentals, and Future Trends
Wang, Z., & Cai, Y. (2023) · Royal Society of Chemistry eBooks · doi:10.1039/bk9781839169946-00001 · Cited by 13
Chen, Z., Zhao, X., Bengel, C., Liu, F., Li, K., Menzel, S., & Du, N. (2024) · Scientific Reports · doi:10.1038/s41598-024-74667-z · Cited by 20
Zha, Y., & Li, J. (2018) · ACM/SIGDA International Symposium on Field-Programmable Gate Arrays (FPGA) · doi:10.1145/3174243.3174244 · Cited by 12
“2 Access Device In the crossbar array, an access device is needed to pair with one RRAM device to suppress the leakage current on the sneak path, thereby reducing the power consumption when programming (writing) the RRAM array [3].”
MethodA Highly Efficient and Scalable Model for Crossbar Arrays with Nonlinear Selectors
Chen, A. (2018) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.2018.8614505 · Cited by 12
Self-citationParasitic Resistance Effect Analysis in RRAM-based TCAM for Memory Augmented Neural Networks
Liao, Y. B., Gao, B., Zhang, W., Yao, P., Li, X., Tang, J., Li, Z., Cui, S. R., Wu, H., & Qian, H. (2020) · IEEE International Memory Workshop (IMW) · doi:10.1109/imw48823.2020.9108137 · Cited by 12
“Prior works have incorporated parasitic resistance effect into RRAM arrays during memory operations [6] and vector-matrix-multiplication operations [7], but different configuration of circuits and different parallelism during the HD computation result in different behaviors of parasitic resistance effect in RRAM-based…”
BackgroundCMA: A Reconfigurable Complex Matching Accelerator for Wire-Speed Network Intrusion Detection
Zha, Y., & Li, J. (2017) · IEEE Computer Architecture Letters · doi:10.1109/lca.2017.2719023 · Cited by 12
“, “V/3” [2]) can be applied.”
Parallel synaptic design of ferroelectric tunnel junctions for neuromorphic computing
Moon, T., Lee, H. J., Nam, S., Bae, H., Choe, D., Jo, S., Lee, Y. S., Park, Y., Yang, J. J., & Heo, J. (2023) · Neuromorphic Computing and Engineering · doi:10.1088/2634-4386/accc51 · Cited by 13
“This has a great advantage in neural network design where the current through the network can easily become enormous due to an extremely large number of the devices in the network [30, 31].”
BackgroundRRAM Crossbar Arrays for Storage Class Memory Applications: Throughput and Density Considerations
Levisse, A., Giraud, B., Noël, J.-P., Moreau, M., & Portal, J. (2018) · Conference on Design of Circuits and Integrated Systems · doi:10.1109/dcis.2018.8681470 · Cited by 11
“As the selection transistor has been suppressed, the leakage current through unselected bitcells (sneakpath) is less controlled and leads to lower read margins [13] and distorted programming current Iprog [10].”
BackgroundJiang, Y., Huang, P. C., Zhou, Z., & Kang, J. (2019) · Science China Information Sciences · doi:10.1007/s11432-018-9863-6 · Cited by 12
Thermal and Signal Integrity Analysis of Novel 3D Crossbar Resistive Random Access Memories
Zayer, F., Lahbacha, K., Dghais, W., Belgacem, H., de Magistris, M., Maffucci, A., & Melnikov, A. V. (2019) · IEEE Workshop on Signal and Power Integrity · doi:10.1109/sapiw.2019.8781680 · Cited by 11
“For instance, the 1/3 bias scheme enables a larger read margin due to the reduced IR voltage drop of the selected cell [5]–[7], while 1/2 write scheme is preferred, due to a much lower power consumption.”
BackgroundSolution to alleviate the impact of line resistance on the crossbar array
Zhu, X. J., Li, Z., Liu, H., Li, Q., Liu, S., Li, N., & Xu, H. (2020) · IET Circuits Devices & Systems · doi:10.1049/iet-cds.2019.0313 · Cited by 9
“As Chen [17] discussed a comprehensive crossbar array model based on the random data pattern, and analysed partial bias schemes for the writing of crossbar memory arrays [18].”
MethodSelect Device Concepts for Crossbar Arrays
Burr, G. W., Shenoy, R. S., & Hwang, H. (2016) · Wiley eBooks · doi:10.1002/9783527680870.ch22 · Cited by 11
Cell Design Considerations for Ovonic Threshold Switch-Based 3-D Cross-Point Array
Ban, S., Lee, J., Kim, T., & Hwang, H. (2023) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2023.3236913 · Cited by 9
“An array calculation is based on MATLAB and uses a method to determine the solution of a matrix comprising equations created based on (2) using Kirchhoff’s law introduced in [22] and [24].”
BackgroundMethodInfluential
Metadata
- Authors
- Chen, A.
- Affiliations
- GlobalFoundries (United States) (US)
- Corresponding author
- Chen, An
- ORCID
- Chen, An
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2013-04
- Volume
- 60
- Issue
- 4
- Pages
- 1318-1326
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W2150313118
- Cited by
- 230
- References
- 17
- Citations by year
- 2026: 18 · 2025: 19 · 2024: 15 · 2023: 17 · 2022: 17 · 2021: 25 · 2020: 19 · 2019: 14 · 2018: 17 · 2017: 20 · 2016: 17 · 2015: 20 · 2014: 9 · 2013: 3
- FWCI
- 9.79
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Electron Devices (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor materials and devices
- Keywords
- crossbar arrays, line resistance, nonlinear device characteristics, voltage degradation, current degradation, sensing margin, statistical analysis, resistive random access memory
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.