A Comprehensive Crossbar Array Model With Solutions for Line Resistance and Nonlinear Device Characteristics
The DOI matches its Crossref record; 16 of the 17 references it cites were found in a registry or an index.
Abstract
This paper presents a comprehensive crossbar array model that incorporates line resistance and nonlinear device characteristics. The model can be solved using matrix algebra and is suitable for statistical analysis. The nonlinear device solution enables the assessment of crossbar arrays with diode or nonlinear select devices. The calculation based on this model shows that voltage and current degradation due to line resistance are not negligible even for small crossbar arrays, which constrains feasible array size. Diode and nonlinear select devices significantly improve the sensing margin of reading operation and the voltage window of writing operation. This model provides a quantitative tool for accurate analysis of crossbar arrays and the evaluation of memory select devices.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In order to avoid voltage loses at the wires of the crossbar, we employed a Dual Side Connection scheme. Despite the increased peripheral circuitry complexity, this scheme improves the voltage delivery to each synapse248 by connecting the two terminals of each wordline to the same input stimuli.”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [248]
In the citing paper
“Such addressing procedure is performed following the VDD/2 approach as it minimizes the line disturbance248.”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [248]
Citations
Cites
Nanoscale Memristor Device as Synapse in Neuromorphic Systems
Jo, S. H., Chang, T., Ebong, I., Bhadviya, B. B., Mazumder, P., & Lu, W. (2010) · Nano Letters · doi:10.1021/nl904092h · Cited by 4,174 · cited 1×
“Crossbar arrays with synaptic junctions are developed to simulate neuromorphic systems [5].”
BackgroundComplementary resistive switches for passive nanocrossbar memories
Linn, E., Rosezin, R., Kügeler, C., & Waser, R. (2010) · Nature Materials · doi:10.1038/nmat2748 · Cited by 1,274
Molecular electronics: from devices and interconnect to circuits and architecture
Stan, M. R., Franzon, P. D., Goldstein, S. C., Lach, J. C., & Ziegler, M. M. (2003) · Proceedings of the IEEE · doi:10.1109/jproc.2003.818327 · Cited by 278
Lee, M.-J., Park, Y., Kang, B.-S., Ahn, S.-E., Lee, C., Kim, K., Xianyu, W., Stefanovich, G., Lee, J.-H., Chung, S.-J., et al. (2007) · 2007 IEEE International Electron Devices Meeting · doi:10.1109/iedm.2007.4419061 · Cited by 224
Fundamental analysis of resistive nano-crossbars for the use in hybrid Nano/CMOS-memory
Flocke, A., & Noll, T. G. (2007) · ESSCIRC 2007 - 33rd European Solid-State Circuits Conference · doi:10.1109/esscirc.2007.4430310 · Cited by 155
Design and analysis of crossbar circuits for molecular nanoelectronics
Ziegler, M. M., & Stan, M. R. (2003) · Proceedings of the 2nd IEEE Conference on Nanotechnology · doi:10.1109/nano.2002.1032256 · Cited by 100
Scaling constraints in nanoelectronic random-access memories
Amsinck, C. J., Spigna, N. H. D., Nackashi, D. P., & Franzon, P. D. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/10/047 · Cited by 81
Cross-point phase change memory with 4F 2 cell size driven by low-contact-resistivity poly-Si diode
Sasago, Kinoshita, Morikawa, Kurotsuchi, Hanzawa, Mine, Shima, Fujisaki, Kume, Moriya, et al. (2009) · Symposium on VLSI Technology · Cited by 76
Kim, G. H., Kim, K. M., Seok, J. Y., Lee, H. J., Cho, D.-Y., Han, J. H., & Hwang, C. S. (2010) · Nanotechnology · doi:10.1088/0957-4484/21/38/385202 · Cited by 46
Yoon, H. S., Baek, I.-G., Zhao, J., Sim, H., Park, M. Y., Lee, H., Oh, G.-H., Shin, J. C., Yeo, I., & Chung, U. (2006) · Symposium on VLSI Technology · Cited by 44
Research works printed but not linked: 1
- chen, 2003, An access-transistor-free (0T/lR) non-volatile resistance random access memory (RRAM) using a novel threshold switching, self-rectifying, IEEE Tech Dig Int Electron Device Meeting, 905
Cited by
Items 201–230 of 230
Defect Induced Aging and Breakdown in High-k Dielectrics
Fang, R. (2018)
Design and Measurement Requirements for Short Flow Test Arrays to Characterize Emerging Memories
Brożek, T., & Ciplickas, D. J. (2019) · IEEE Journal of the Electron Devices Society · doi:10.1109/jeds.2019.2943133
“An additional selector element has been proposed to block the sneak paths and allow larger array size [10]–[11].”
BackgroundChen, Z., & Dolecek, L. (2019) · arXiv (Cornell University)
Memristor Crossbar Array Testing Using Sneak Paths
Joshi, R. (2021) · doi:10.15760/etd.7519
Transfer Modeling for 1T1R Crossbar Arrays with Line ResistancesPreprint
Zhang, X., & Zeng, Y. (2021) · Research Square · doi:10.21203/rs.3.rs-356720/v1
“A detailed matrix-based array solution method is given in the appendix, in which the equations have modified for the reason of the different array architecture between this work and [24].”
BackgroundMethodInfluentialGraphene Lateral Spin Valves For Computing And Magnetic Field Sensing Applications
Hu, J. (2019) · University of Minnesota Digital Conservancy (University of Minnesota)
Strategy of Mitigating Breakdown Interference and Yield Loss in Crossbar Memory
Chang, C., Wang, I., Huang, H., Hudec, B., Wu, M.-H., Chang, C.-C., Liu, P., & Hou, T. (2021) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2021.3118989
Prince, B. (2014) · Wiley eBooks · doi:10.1002/9781118760475.ch05
Non-Idealities in Memristor Devices and Methods of Mitigating Them
Kaleem, M. A., Cai, J., Chang, Y., Genov, R., & Amirsoleimani, A. (2024) · IntechOpen eBooks · doi:10.5772/intechopen.1003837
BITLITE: Light Bit-wise Operative Vector Matrix Multiplication for Low-Resolution Platforms
Tran, V., Chen, D., Genov, R., Azghadi, M. R., & Amirsoleimani, A. (2024) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas58744.2024.10558615
“However, memristors have finite intermediate conductance stages and are susceptible to drift, read noise, and asymmetry due to inherent device imperfections [14]–[16], which in turn, constrain the performance of ML algorithms on crossbar circuits.”
BackgroundNURODE: In-Memory Crossbar Core for Hodgkin-Huxley Model ODE-Based Computations
Gong, A., Azghadi, M. R., Genov, R., & Amirsoleimani, A. (2024) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas58744.2024.10558124
“The results presented in this work are simulated in software following the memristor model presented in [10] and the crossbar model including nonlinear characteristics presented in [11].”
MethodKang, K., Niu, W., Pan, J., Wang, Y., Wang, Y., Dong, C., Chen, W., He, Y. J., Tang, X., & Hu, W. H. (2025) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2025.3580491
“To study the feasibility and requirement improvement of the prepared crossbar arrays, two common bias schemes (1/2 bias and 1/3 bias schemes) were simulated in MATLAB to evaluate the accuracy rates of writing and erasing operations based on the statistical analysis [34], [35].”
Model-Based Write Algorithm for Memristive Crossbar Arrays
Schroedter, R., Demirkol, A. Ş., Messaris, I., Bruchatz, C., Mgeladze, E., Slesazeck, S., Mikolajick, T., & Tetzlaff, R. (2025) · International Conference on Modern Circuits and Systems Technologies · doi:10.1109/mocast65744.2025.11083963
“Following a review of the mathematical description of memristive crossbars from [7], analyzed in [8], and implemented in [9], [10], we identified a lack of flexibility in these frameworks for simulating extended compact memristor models including capacitances.”
Co-Optimization of Selector–Memory Combinations in Cross-Point Array
Chae, S., Choi, M.-G., Ban, S., Kim, M., Ghosh, D., Chae, S., & Lee, S. H. (2025) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2025.3625139
“Therefore, careful co-design and optimization of the selector and memory elements are essential for reliable, high-performance XPA-based SCM. Building upon prior works that thoroughly analyze a significant array of e ff ects [18], [19], [20], our research takes a complementary perspective.”
Huang, Y. X., Lin, Y. S., Huang, P., & Hsieh, E. R. (2026) · IEEE Solid-State Circuits Letters · doi:10.1109/lssc.2026.3675063
“While crossbar architectures [7] offer maximum theoretical density, they are hindered by sneak-path currents that require complex selec-tors.”
3D high density memory based on emering resistive technologies : circuit and architecture design
Levisse, A. (2017) · theses.fr (ABES) · doi:10.70675/8f85946ez1b96z4275z8648z3d63e5e267fc · Cited by 1
Liu, T., Ren, H., Tong, P., Wang, W., Li, Q. Y., Xia, M., Sun, Y., Cao, R., Song, B., Li, Z., et al. (2026) · Micromachines · doi:10.3390/mi17040481
“Existing research on parasitic resistance compensation has focused on addressing either input resistance or line resistance in isolation, with complex computation processes that increase system latency or require precise modeling of parasitic parameters [12–22].”
A Reduction-Based Fast Algorithm for Modeling Memristive Crossbar Array With IR-Drop Effect
Zhang, Y., & Yu, W. (2026) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2026.3687154
“1 illustrates a 3 × 3 MCA, where we adopt a traditional lumped-parameter model with a one-resistor (1R) crosspoint array of memristive cells, as [2], [3], [4], [5], [6], [7], [8], and [9].”
Chung, P. H., Ryu, J., Seo, D., Min, K., & Yoon, T. (2026) · npj Unconventional Computing · doi:10.1038/s44335-026-00065-5
A Multi-Bit CMOS Characterization Platform for One-Million Resistive Switching Devices
Mifsud, A., Shen, J., Feng, P., Xie, L., Wang, C., Alshaya, A., Agwa, S. O., Pan, Y., Maheshwari, S., Wang, S., et al. (2026) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2026.3680429
“3, chosen for its immunity to sneak-path currents common in selector-less crossbar arrays [27], [28].”
Wire resistance impact and compensation methods in analog switching 1R memristive crossbar arrays
Mgeladze, E., Ho, P. Y., Schroedter, R., Tetzlaff, R., Mikolajick, T., & Slesazeck, S. (2026) · Solid-State Electronics · doi:10.1016/j.sse.2026.109381
X-Sim: An Accurate and Scalable Simulator for Memristive Computing-in-Memory Accelerators
Stavrakakis, K., Smeele, B., Arapidis, E., Spyrou, T., Gebregiorgis, A., Wong, S., Gaydadjiev, G. N., & Hamdioui, S. (2026) · Design, Automation, and Test in Europe · doi:10.23919/date69613.2026.11539379
“We employ Chen’s conductance-matrix method [28] to write the crossbar nodal equations as GV = E .”
Pei, Z., Riam, S. Z., Mooney, K., Pan, C., Gong, N., & Wang, J. (2026) · ACM Great Lakes Symposium on VLSI (GLSVLSI) · doi:10.1145/3787109.3815222
Ho, C.-Y., Lee, C. Y., Chang, C. C., & Su, Y. W. (2026) · Surfaces and Interfaces · doi:10.1016/j.surfin.2026.110015
Jiang, Y., Ma, H., 白永琴, Han, X., Shi, Y., Schutt‐Ainé, J. E., Xu, Y., & Li, E. (2026) · Engineering · doi:10.1016/j.eng.2026.07.011
Assis, J., Macedo, V., & Rosado, L. S. (2026) · IEEE International Workshop on Metrology for Industry 4.0 & IoT (MetroInd4.0&IoT) · doi:10.1109/metroind4.0iot69397.2026.11653112
“Following the crossbar formulation presented in [15], the small-signal admittance of a generic cell can be defined as For the addressed cell (1 , 1) , the remaining elements can be grouped into three aggregates corresponding to the selected column, selected row, and the interior of the matrix,…”
InfluentialVolatile Memristive Devices With Tunable Temporal Dynamics For Event‐Based Sensing
Spithouris, D., Hellwig, J., Greatorex, H., Wittberg, C., Koutsogiannis, P., Magén, C., Chicca, E., & Dittmann, R. (2026) · Advanced Materials · doi:10.1002/adma.74813 · Cited by 2
“…interest for their fast switching and high scalability, they are affected by issues like inherent high variability and noise level, unreliable filament formation, need for current compliance, CMOS-incompatible forming process, and very low ON-state that yields high energy consumption [ 24–27 ].”
Heo, D. Y., Hwang, S. J., Kim, G., Hilal, M., Cai, Z., Kang, J., & Kim, H. (2026) · Journal of Science Advanced Materials and Devices · doi:10.1016/j.jsamd.2026.101273
Wu, S., Lu, Y., Zhong, W., Shi, Q., He, S., Sun, Q., Wang, X., Cheng, B., & Zhao, J. (2026) · Advanced Computing · doi:10.1002/adco.70009
Device‐to‐System Perspectives on Scalable Ising Machines for Physics‐Driven Computing
Youn, S., Hwang, H., Lee, J., 서희수, & Kim, S. (2026) · Advanced Quantum Technologies · doi:10.1002/qute.70519
Metadata
- Authors
- Chen, A.
- Affiliations
- GlobalFoundries (United States) (US)
- Corresponding author
- Chen, An
- ORCID
- Chen, An
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2013-04
- Volume
- 60
- Issue
- 4
- Pages
- 1318-1326
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W2150313118
- Cited by
- 230
- References
- 17
- Citations by year
- 2026: 18 · 2025: 19 · 2024: 15 · 2023: 17 · 2022: 17 · 2021: 25 · 2020: 19 · 2019: 14 · 2018: 17 · 2017: 20 · 2016: 17 · 2015: 20 · 2014: 9 · 2013: 3
- FWCI
- 9.79
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Electron Devices (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor materials and devices
- Keywords
- crossbar arrays, line resistance, nonlinear device characteristics, voltage degradation, current degradation, sensing margin, statistical analysis, resistive random access memory
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.