Voltage-Controlled Cycling Endurance of HfOx-Based Resistive-Switching Memory
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Resistive-switching memory (RRAM) based on metal oxide is currently considered as a possible candidate for future nonvolatile storage and storage-class memory. To explore possible applications of RRAM, the switching variability and the cycling endurance are key issues that must be carefully understood. To this purpose, we studied the switching variability and the endurance in pulsed regime for HfOx-based RRAM. We found that the resistance window, the set/reset variability, and the endurance are all controlled by the maximum voltage Vstop, which is applied during the negative-reset operation. We demonstrate that the endurance failure is triggered by a negative-set event, where the resistance suddenly decreases during the reset. Cycling endurance is studied as a function of time, compliance current and Vstop, allowing to develop an Arrhenius-law model, which is capable of predicting device lifetime under various conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pickett, M. D., & Stanley Williams, R. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/21/215202 · Cited by 385
Guan, X., Yu, S., & Wong, H.-S. P. (2012) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2012.2184545 · Cited by 355
Cited by
In-memory computing with resistive switching devices
Ielmini, D., & Wong, H.-S. P. (2018) · Nature Electronics · doi:10.1038/s41928-018-0092-2 · Cited by 2,298
Self-citationResistive switching memories based on metal oxides: mechanisms, reliability and scaling
Ielmini, D. (2016) · Semiconductor Science and Technology · doi:10.1088/0268-1242/31/6/063002 · Cited by 905
Self-citationStandards for the Characterization of Endurance in Resistive Switching Devices
Lanza, M., Waser, R., Ielmini, D., Yang, J. J., Goux, L., Suñe, J., Kenyon, A. J., Mehonic, A., Spiga, S., Rana, V., et al. (2021) · ACS Nano · doi:10.1021/acsnano.1c06980 · Cited by 262
Self-citationAmbrogio, S., Balatti, S., Milo, V., Carboni, R., Wang, Z.-Q., Calderoni, A., Ramaswamy, N., & Ielmini, D. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2016.2526647 · Cited by 256
Self-citationPhysical Unbiased Generation of Random Numbers With Coupled Resistive Switching Devices
Balatti, S., Ambrogio, S., Carboni, R., Milo, V., Wang, Z., Calderoni, A., Ramaswamy, N., & Ielmini, D. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2016.2537792 · Cited by 127
“Devices used in our RNG circuits were bipolar RRAMs, consisting of a Si-doped HfO 2 switching layer with TiN bottom electrode (BE) and Ti top electrode (TE), acting as an oxygen exchange layer for defect generation at the TE side [4], [14].”
BackgroundMethodSelf-citation
Metadata
- Authors
- Balatti, S., Ambrogio, S., Wang, Z., Sills, S., Calderoni, A., Ramaswamy, N., & Ielmini, D.
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2015-10
- Volume
- 62
- Issue
- 10
- Pages
- 3365-3372
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W1586075670
- Cited by
- 109
- References
- 2
- FWCI
- 4.97
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.