Automated Monitoring of Magnet Quality for Permanent-Magnet Synchronous Motors at Standstill
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Demagnetization of permanent magnets (PMs) used in synchronous motors can occur due to a combination of thermal, electrical, and/or environmental operating stresses. Since PM demagnetization results in degradation of motor performance, efficiency, and reliability, it is important to monitor the quality of PMs regularly. However, there are many limitations to the offline and online methods currently used for magnet quality assessment. In this paper, a new inverter-embedded technique for automated monitoring of magnet quality for permanent-magnet synchronous motors (PMSMs), which overcomes the limitations of existing techniques, is proposed. The main concept is to use the inverter to perform a standstill test whenever the motor is stopped to detect local or uniform PM demagnetization. The machine is excited with a pulsating field at different angular positions, and the change in the current peaks caused by the change in the degree of magnetic saturation due to demagnetization is observed. An experimental study on a 10-hp PMSM verifies that local and uniform PM demagnetizations can be detected with high sensitivity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rajagopalan, S., Roux, W. L., Habetler, T. G., & Harley, R. G. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.904183 · Cited by 164
Cited by
Da, Y., Shi, X., & Krishnamurthy, M. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2227808 · Cited by 303
Faiz, J., & Mazaheri-Tehrani, E. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2608950 · Cited by 207
Choi, S., Haque, M. S., Tarek, M. T. B., Mulpuri, V., Duan, Y., Das, S., Garg, V., Ionel, D. M., Masrur, M. A., Mirafzal, B., et al. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2819627 · Cited by 192
Demagnetization Fault Indexes in Permanent Magnet Synchronous Motors—An Overview
Faiz, J., & Nejadi-Koti, H. (2016) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2015.2480379 · Cited by 119
Da, Y., Shi, X., & Krishnamurthy, M. (2011) · 2011 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2011.6043248 · Cited by 96
“In reality not only partial demagnetization, but also other asymmetric problems like load unbalance, misalignment, or oscillating load can produce the same harmonics [19].”
Metadata
- Authors
- Hong, J., Hyun, D., Lee, S. B., Yoo, J.-Y., & Lee, K.-W.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2010-07
- Volume
- 46
- Issue
- 4
- Pages
- 1397-1405
- ISSN
- 0093-9994 (ISSN-L)
- 1939-9367
- OpenAlex
- W2170300551
- Cited by
- 100
- References
- 1
- FWCI
- 3.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Automated Monitoring of Magnet Quality for Permanent-Magnet Synchronous Motors at Standstill. https://app.cochat.ai/papers/10.1109/tia.2010.2049811
- The paper
- Hong, J., Hyun, D., Lee, S. B., Yoo, J.-Y., & Lee, K.-W. (2010). Automated Monitoring of Magnet Quality for Permanent-Magnet Synchronous Motors at Standstill. IEEE Transactions on Industry Applications. https://doi.org/10.1109/tia.2010.2049811
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.