Sensing Power MOSFET Junction Temperature Using Gate Drive Turn-On Current Transient Properties
The DOI matches its Crossref record.
Abstract
Junction temperature sensing for high-bandwidth power MOSFET junction temperature protection is usually achieved on the power converter's high power side, by directly monitoring the power switches with additional temperature detectors. This requires special considerations for high voltage, high current, high temperature, and EMI protection. This paper presents a new method applied on the power converter's low power side (MOSFET gate drive) so that junction temperature sensing can be integrated into MOSFET gate drive. For the purpose of demonstrating MOSFET junction temperature sensing, a push-pull gate drive is applied to a switching current divider circuit. The gate drive turn-on current transient waveform is used for MOSFET junction temperature estimation. A “gate drive-MOSFET” switching dynamic model is implemented indicating the mechanisms of MOSFET gate drive output dynamics. Modeling includes gate-drive push-pull output, gate drive output parasitics, power MOSFET intrinsic parameters, PCB parasitics, and load parasitics. LTSpice simulation of this model is studied and compared with experimental results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A Digital Twin Based Estimation Method for Health Indicators of DC–DC Converters
Peng, Y., Zhao, S., & Wang, H. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3009600 · Cited by 305
Real-Time Measurement of Temperature Sensitive Electrical Parameters in SiC Power MOSFETs
Griffo, A., Wang, J., Colombage, K., & Kamel, T. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2739687 · Cited by 175
“A simple peak detector circuit measuring the voltage across the external gate resistor (VRG ,ext) whose peak is directly proportional to the gate current [25]–[27] is outlined in the schematic shown in Fig.”
BackgroundEvaluation of Aging's Effect on Temperature-Sensitive Electrical Parameters in SiC mosfets
Yang, F., Ugur, E., & Akin, B. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2950311 · Cited by 121
AC Power Cycling Test Setup and Condition Monitoring Tools for SiC-Based Traction Inverters
Farhadi, M., Vankayalapati, B. T., Sajadi, R., & Akin, B. (2023) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2023.3271251 · Cited by 24
“In [71], [87], [88], [89], the internal gate resistance-based temperature measurements are proposed.”
Background
Metadata
- Authors
- Niu, H., & Lorenz, R. D.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2016-03
- Volume
- 52
- Issue
- 2
- Pages
- 1677-1687
- ISSN
- 0093-9994 (ISSN-L)
- 1939-9367
- OpenAlex
- W2302561359
- Cited by
- 65
- References
- 0
- FWCI
- 3.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Sensing Power MOSFET Junction Temperature Using Gate Drive Turn-On Current Transient Properties. https://app.cochat.ai/papers/10.1109/tia.2015.2497202
- The paper
- Niu, H., & Lorenz, R. D. (2016). Sensing Power MOSFET Junction Temperature Using Gate Drive Turn-On Current Transient Properties. IEEE Transactions on Industry Applications. https://doi.org/10.1109/tia.2015.2497202
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.