Cyber-Physical Zero Trust Architecture for Industrial Cyber-Physical Systems
The DOI matches its Crossref record; 29 of the 31 references it cites were found in a registry or an index.
Abstract
In recent years, zero trust architecture (ZTA) has become an emerging security architecture. When deploying to industrial systems, an important consideration of the ZTA is the effective modeling of the cross-layer penetration between cyber and physical layers. An ineffective model of cross-layer penetration can lead to inferior performance in mitigating cross-layer failures. To tackle this issue, this paper develops a subset of the ZTA dedicated to industrial cyber-physical systems (ICPS), called the Cyber-Physical-ZTA, to model cross-layer penetration. Its uniqueness mainly consists of two innovative techniques, namely, a multi-layer access control engine and an integrated physical model-based and data-driven policy optimizer. The multi-layer access control engine can evaluate the trust scores for each component considering their cross-layer impact, while the integration of data-driven and model-based approaches can improve efficiency in optimizing access policies. Our simulations are conducted to demonstrate the effectiveness of Cyber-Physical-ZTA. In comparison to the standard ZTA, with no rules added to detect cross-layer penetration, the multi-access policy engine of the Cyber-Physical-ZTA increases the detection probability against false data injection (FDI) attacks by more than 31%.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Translating this canonical model into OT introduces three categories of friction that have been the subject of considerable recent commentary [11], [15], [17].”
In the citing paper
“First, the safety-availability priority inversion : OT prioritizes safety and availability above confidentiality and integrity, which is the inverse of the classical IT C-I-A triad.”
In the citing paper
“Their Cyber-Physical Zero Trust Architecture (CP-ZTA) introduces a multi-layer access control engine and integrates physical model-based and data-driven policy optimization to address cross-layer penetration attacks between cyber and physical layers.”
In the citing paper
“but the design is evaluated only at the level of simulated power-grid scenarios and does not address deterministic transport or post-quantum cryptography.”
Citations
Cites
Zimmerman, R. D., Murillo-Sanchez, C. E., & Thomas, R. J. (2011) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2010.2051168 · Cited by 6,756
False data injection attacks against state estimation in electric power grids
Liu, Y., Ning, P., & Reiter, M. K. (2011) · ACM Transactions on Information and System Security · doi:10.1145/1952982.1952995 · Cited by 2,428
The 2015 Ukraine Blackout: Implications for False Data Injection Attacks
Liang, G., Weller, S. R., Zhao, J., Luo, F., & Dong, Z. Y. (2017) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2016.2631891 · Cited by 1,248
Machine Learning and Deep Learning Methods for Cybersecurity
Xin, Y., Kong, L., Liu, Z., Chen, Y., Li, Y., Zhu, H., Gao, M., Hou, H., & Wang, C. (2018) · IEEE Access · doi:10.1109/access.2018.2836950 · Cited by 1,228
Rose, S., Borchert, O., Mitchell, S., & Connelly, S. (2020) · doi:10.6028/nist.sp.800-207 · Cited by 1,174
Q-Learning-Based Vulnerability Analysis of Smart Grid Against Sequential Topology Attacks
Yan, J., He, H., Zhong, X., & Tang, Y. (2017) · IEEE Transactions on Information Forensics and Security · doi:10.1109/tifs.2016.2607701 · Cited by 264
Security of Zero Trust Networks in Cloud Computing: A Comparative Review
Sarkar, S., Choudhary, G., Shandilya, S. K., Azath, H., & Kim, H. (2022) · Sustainability · doi:10.3390/su141811213 · Cited by 252
A Security Awareness and Protection System for 5G Smart Healthcare Based on Zero-Trust Architecture
Chen, B., Qiao, S., Zhao, J., Liu, D., Shi, X., Lyu, M., Chen, H., Lu, H., & Zhai, Y. (2021) · IEEE Internet of Things Journal · doi:10.1109/jiot.2020.3041042 · Cited by 213
Learning the travelling salesperson problem requires rethinking generalization
Joshi, C. K., Cappart, Q., Rousseau, L.-M., & Laurent, T. (2020) · Constraints · doi:10.4230/lipics.cp.2021.33 · Cited by 202
Graph Neural Networks Based Detection of Stealth False Data Injection Attacks in Smart Grids
Boyaci, O., Umunnakwe, A., Sahu, A., Narimani, M. R., Ismail, M., Davis, K., & Serpedin, E. (2021) · IEEE Systems Journal · doi:10.1109/jsyst.2021.3109082 · Cited by 194
Cited by
Wang, Y., Pan, Y., Su, Z., Deng, Y., Zhao, Q., Du, L., Luan, T. H., Kang, J., & Niyato, D. (2026) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2025.3576176 · Cited by 68
Zhou, X., Liang, W., Wang, K. I., Yada, K., Yang, L. T., Ma, J., & Jin, Q. (2025) · IEEE Journal on Selected Areas in Communications · doi:10.1109/jsac.2025.3560012 · Cited by 62
“Feng and Hu [30] introduced a so-called cyber-physical-ZTA framework in industrial cyber-physical systems, which aimed to model the cross-layer penetration with evaluated trust scores, based on an integrated physical model based and data-driven optimizer in a fine-grained access policy.”
Tooki, O. O., & Popoola, O. (2024) · Renewable energy focus · doi:10.1016/j.ref.2024.100628 · Cited by 40
Wang, X., Geng, Y., Luo, X., et al. (2026) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2026.114259 · Cited by 21
Markov game based on reinforcement learning solution against cyber–physical attacks in smart grid
Bitirgen, K., & Filik, Ü. B. (2024) · Expert Systems with Applications · doi:10.1016/j.eswa.2024.124607 · Cited by 21
Xu, D., Gondal, I., Yi, X., Sušnjak, T., Watters, P., & McIntosh, T. R. (2025) · Journal of Cybersecurity and Privacy · doi:10.3390/jcp5040087 · Cited by 25
Lv, F., Wang, H., Pan, Z., Sun, R., Si, S., Zhang, W., Lv, S., & Sun, L. (2025) · Computer Networks · doi:10.1016/j.comnet.2025.111459 · Cited by 12
Dash, B. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4726625 · Cited by 11
Villalón, J. L. R., de la Torre, L., Lei, Z., Hu, W., Kussaba, H. T. M., & Lemieux, V. L. (2025) · Computers in Industry · doi:10.1016/j.compind.2025.104264 · Cited by 12
Stodt, F., Reich, C., & Théoleyre, F. (2025) · IEEE Internet of Things Journal · doi:10.1109/jiot.2025.3579028 · Cited by 14
Muriithi, G., Papari, B., Arsalan, A., Timilsina, L., Muriithi, A., Buraimoh, E., Khan, A., Özkan, G., Edrington, C. S., & Papari, A. (2025) · IEEE Open Journal of Vehicular Technology · doi:10.1109/ojvt.2025.3592041 · Cited by 13
“The propagation of malware, horizontal movement of attacks, and the potential for cascading system failures emphasize the importance of establishing a robust and holistic security framework for CP-HEVs [21].”
InfluentialWu, S., Wang, Q., Hu, J., Ye, Y., & Tang, Y. P. (2025) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2025.3615645 · Cited by 9
“This encryption architecture and technical details can be found in [30] and [31], which is not the focus of this paper, whereas this section focuses on the dynamic configura-tion sequence of trusted PMUs instead.”
Adaptive Software-Defined Perimeter Placement for Dynamic User Distributions in Zero-Trust Networks
Huang, X., Xue, K., Chen, L., Huang, Z., Han, J., Li, J., & Li, R. (2025) · IEEE Transactions on Network Science and Engineering · doi:10.1109/tnse.2025.3649680 · Cited by 8
“Feng et al. [14] developed a cyber-physical zero-trust framework for industrial systems, emphasizing continuous verification and identity enforcement across heterogeneous cyber-physical layers.”
Enhancing Behavioral Analytics with Zero Trust in Cloud: A Comparative Analysis
Wairagade, A. (2024) · International Conference on Engineering and Emerging Technologies (ICEET) · doi:10.1109/iceet65156.2024.10913739 · Cited by 4
“To address that, Feng et al., [30] designed an architecture that makes use of a zero-trust model-based multi-layer access control engine and data drive policy.”
Fogli, M., Giannelli, C., Mari, E., & Stefanelli, C. (2025) · International Conference on Distributed Computing in Smart Systems and the Internet of Things (DCOSS-IoT) · doi:10.1109/dcoss-iot65416.2025.00115 · Cited by 3
“[20]proposes a ZTA solution introducing two key points: a multi-layer access control engine and a hybrid model-based/data-driven policy optimizer.”
Token as a Service for Software-Defined Zero Trust Networking
Erel-Özçevı̇k, M. (2024) · Journal of Network and Systems Management · doi:10.1007/s10922-024-09894-w · Cited by 2
“Therefore, it requires a cross-layer design to separate trusted and untrusted zones [18].”
Mamoon, M., Rehan, M., Mustafa, G., et al. (2024) · IEEE Access · doi:10.1109/access.2024.3518924 · Cited by 2
“The most prevalent problem in today’s society is cyber-attacks such as false data injection (FDI) attacks [9], denial-of-service (DoS) attacks [3], [10], and replay attacks [11], which can cause severe degradation in a system’s performance or even result in damage.”
Lv, F., Wang, H., Pan, Z., et al. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5084660 · Cited by 2
A watermark-based defense strategy to improve the detection rate of false-data-injection attacks
Wang, Y., Lu, J., & Liu, R. (2025) · Measurement and Control · doi:10.1177/00202940251344837 · Cited by 1
Securing Industrial IoT with Zero Trust: A Framework for Critical Infrastructure
Kumar, L., Bais, K. S. S., & Tripathi, S. L. (2025) · doi:10.1109/i2itcon65200.2025.11210610 · Cited by 1
“Feng and Hu (2023) present a CP-ZTA specifically designed for ICPS to improve the security of multilayer cyberphysical networks.”
Empirical Evaluation of AI-Assisted Risk Reasoning for ICPS Software Security
Iyenghar, P. (2026) · IEEE Transactions on Industrial Cyber-Physical Systems · doi:10.1109/ticps.2026.3669084 · Cited by 1
“Complementarystructured-evaluationap-proaches,includingHumanEvalforcodesynthesis[15],chain-of-thoughtprompting[16],OpenAI’sfunction-calling[17],and cyber-physicalZeroTrustArchitectureforICPS[18]demon-stratethemovetowardschema-constrainedandinterpretable modelbehavior.”
A novel CBOR based CA certificate for IoT device security
VellaiPandi, M., Bharathi, B., Gobinath, K., et al. (2026) · International Journal of Systems Assurance Engineering and Management · doi:10.1007/s13198-026-03200-4 · Cited by 1
Chen, Q., Liu, Y., Wang, J., & Zhou, Y. (2026) · Information Sciences · doi:10.1016/j.ins.2026.123622 · Cited by 1
Butka, A., & Bobda, C. (2026) · Journal of Hardware and Systems Security · doi:10.1007/s41635-026-00185-1 · Cited by 1
“Feng and Hu [43] developed dynamic access control policies that are adjusted based on device status, potential attacks, and time-to-system-recovery requirements.”
Privacy Preserving and Verifiable Outsourcing of AI Processing for Cyber-Physical Systems
Spathoulas, G. P., Katsika, A., & Kavallieratos, G. (2024) · Lecture notes in computer science · doi:10.1007/978-981-97-8798-2_15 · Cited by 1
Secure platooning control of connected vehicles against data injection attacks
Liu, J., Tang, S., Gao, S., et al. (2025) · Security and Safety · doi:10.1051/sands/2025002
Zheng, Y., Yi, H., Lu, Y., et al. (2025) · IEEE Internet of Things Journal · doi:10.1109/jiot.2025.3637216
“Recent advances in industrial cyber-physical systems have led to the development of adaptive gossip optimization frameworks that dynamically modulate communication protocols in response to rapid operational changes [7].”
Optical-Information Support of Artifact Detection by Robotic Complex on a Complex Background
Borisov, V. V., Yakimenko, I. V., & Yakimenko, Y. (2026) · Studies in systems, decision and control · doi:10.1007/978-3-032-02717-7_17
Dli, M. I., Orekhov, V. A., Bobkov, V. I., et al. (2026) · Studies in systems, decision and control · doi:10.1007/978-3-032-02544-9_11
Bobkov, V. I., Orekhov, V. A., & Dli, M. I. (2026) · Studies in systems, decision and control · doi:10.1007/978-3-032-02544-9_10
Shah, M. H., Rashid, R., Syed, M. H., et al. (2025) · IEEE International Conference on Smart Communities: Improving Quality of Life using AI, Robotics and IoT (HONET) · doi:10.1109/honet67928.2025.11318442
“Feng and Hu addressed the security of industrial systems via cyber-physical Zero Trust models [6].”
Guo, S., Huang, D., Ahn, C. K., et al. (2026) · IEEE Transactions on Intelligent Transportation Systems · doi:10.1109/tits.2026.3651533
Wei, R., Huang, D., & Na, Y. (2025) · CAA International Conference on Vehicular Control and Intelligence (CVCI) · doi:10.1109/cvci66304.2025.11348591
“…dynamic networks and conventional trust models fail in complex traffic environments, the Zero Trust architecture implements cross-domain continuous trust assessment with real-time security monitoring, establishing a unified paradigm against escalating threats in cyberspace and vehicle networks[1].”
Fan, Z., Zhu, X., Tan, J., et al. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6189653
Zhang, S., Bao, S., Chi, K., & Shi, Z. (2026) · IEEE Transactions on Mobile Computing · doi:10.1109/tmc.2026.3674108 · Cited by 1
“With the large-scale deployment of industrial IoT devices, a joint design of resource allocation for computing and communication is emerging for time-critical cyber-physical systems [3].”
Dattatreya, V., Adudhodla, M., Anupkant, S., et al. (2025) · International Conference on Smart Electronics and Communication (ICOSEC) · doi:10.1109/icosec67334.2025.11459650
“Similarly, [17] Integrate federated learning with cryptographic protocols, presenting a framework that ensures IoT data privacy while allowing distributed intelligence to emerge at the edge.”
Zero-Trust Security Architecture for Protecting Critical Infrastructure Cyber Physical Systems
Nittala, E. P. (2026) · doi:10.1109/icmlas67792.2026.11483911
“Plain rule-based security systems cannot easily identify new or changing attacker patterns, whereas single reinforcement learning projects might be unstable when deployed to safety-critical CPS systems [7].”
Wu, S., Wang, Q., Tang, Y., & He, W. (2026) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2026.117232 · Cited by 4
Abroshan, H., & Barrère, M. (2026) · Array · doi:10.1016/j.array.2026.101050
Liu, W., Jing, F., & Guo, J. (2026) · Journal of the Franklin Institute · doi:10.1016/j.jfranklin.2026.108900
Anomaly-Aware Dynamic Trust Thresholding for Zero Trust Architecture for Secure e-Healthcare
Kumar, A., & Sharma, A. (2026) · International Conference on Secure Cyber Computing and Communications (ICSCCC) · doi:10.1109/icsccc69031.2026.11600078
“The exponential growth of IoMT devices has improved healthcare efficiency and enabled real-time and remote medical services, but it also exposes healthcare systems to increased cyber risks [1].”
Urs, P. G., & Mureşan, V. (2026) · Journal of Cybersecurity and Privacy · doi:10.3390/jcp6050158
“A secondary failure mode is safety conflict: automated access revocation, a core mechanism for containing compromise, can itself trigger unsafe conditions if it interrupts a safety-critical control function mid-execution [20,36].”
InfluentialState-Aware Zero Trust Architecture for Offshore Wind Farms Based on Software-Defined Perimeter
Lim, C.-M., Shin, D.-H., Kim, K.-K., & Euom, I.-C. (2026) · IEEE Access · doi:10.1109/access.2026.3732584
“Feng and Hu [22] proposed a cyber-physical zero trust architecture for industrial cyber-physical systems, combining multilayer access-control engine with physics-based and data-driven policy optimization.”
Qadri, S. M. (2026) · Frontiers in Computer Science and Artificial Intelligence · doi:10.32996/fcsai.2026.5.9.2
“Translating this canonical model into OT introduces three categories of friction that have been the subject of considerable recent commentary [11], [15], [17].”
Metadata
- Authors
- Feng, X., & Hu, S.
- Affiliations
- University of Southampton (GB)
- Venue
- IEEE Transactions on Industrial Cyber-Physical Systems
- Published
- 2023
- Volume
- 1
- Pages
- 394-405
- ISSN
- 2832-7004 (ISSN-L)
- OpenAlex
- W4389076254
- Semantic Scholar
- 0ab728d13818c32606798b5d1b1b12ad872f74e2
- Cited by
- 45
- References
- 31
- Citations by year
- 2026: 20 · 2025: 18 · 2024: 7
- FWCI
- 4.83
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Transactions on Industrial Cyber-Physical Systems (publishedVersion)
- ePrints Soton (University of Southampton) (acceptedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Smart Grid Security and Resilience
- Physical Sciences › Computer Science › Computer Networks and Communications › Access Control and Trust
- Physical Sciences › Computer Science › Information Systems › Information and Cyber Security
- Keywords
- zero-trust architecture, industrial cyber-physical systems, access control, trust evaluation, policy optimization, false data injection attacks, attack detection
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.