The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
A General Approach for the Transient Detection of Slip-Dependent Fault Components Based on the Discrete Wavelet Transform
Open accessAbstract
In this paper, a general methodology based on the application of discrete wavelet transform (DWT) to the diagnosis of the cage motor condition using transient stator currents is exposed. The approach is based on the identification of characteristic patterns introduced by fault components in the wavelet signals obtained from the DWT of transient stator currents. These patterns enable a reliable detection of the corresponding fault as well as a clear interpretation of the physical phenomenon taking place in the machine. The proposed approach is applied to the detection of rotor asymmetries in two alternative ways, i.e., by using the startup current and by using the current during plugging stopping. Mixed eccentricities are also detected by means of the transient-based methodology. This paper shows how the evolution of other non-fault-related components such as the principal slot harmonic (PSH) can be extracted with the proposed technique. A compilation of experimental cases regarding the application of the methodology to the previous cases is presented. Guidelines for the easy application of the methodology by any user are also provided under a didactic perspective.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Wavelet Tour of Signal Processing
(1999) · Elsevier eBooks · doi:10.1016/b978-0-12-466606-1.x5000-4 · Cited by 16,227
Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review
Nandi, S., Toliyat, H. A., & Li, X. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847955 · Cited by 2,382
Introduction to Wavelets and Wavelet Transforms: A Primer
Burrus, C. S., Gopinath, R. A., Guo, H., Odegard, J. E., & Selesnick, I. (1997) · Cited by 1,794
A review of induction motors signature analysis as a medium for faults detection
El Hachemi Benbouzid, M. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873206 · Cited by 1,602
Online Diagnosis of Induction Motors Using MCSA
Jung, J.-H., Lee, J.-J., & Kwon, B.-H. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.885131 · Cited by 570
Fault Detection in Induction Machines Using Power Spectral Density in Wavelet Decomposition
Cusid�Cusido, J., Romeral, L., Ortega, J. A., Rosero, J. A., & Garc�aGarcia Espinosa, A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.911960 · Cited by 512
Vibration and current monitoring for detecting airgap eccentricity in large induction motors
Cameron, J. R., Thomson, W. T., & Dow, A. B. (1986) · IEE Proceedings B Electric Power Applications · doi:10.1049/ip-b.1986.0022 · Cited by 512
Recent developments of induction motor drives fault diagnosis using AI techniques
Filippetti, F., Franceschini, G., Tassoni, C., & Vas, P. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873207 · Cited by 511
Quantitative evaluation of induction motor broken bars by means of electrical signature analysis
Bellini, A., Filippetti, F., Franceschini, G., Tassoni, C., & Kliman, G. B. (2001) · IEEE Transactions on Industry Applications · doi:10.1109/28.952499 · Cited by 483
The detection of inter-turn short circuits in the stator windings of operating motors
Joksimovic, G. M., & Penman, J. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873216 · Cited by 471
Dorrell, D. G., Thomson, W. T., & Roach, S. (1997) · IEEE Transactions on Industry Applications · doi:10.1109/28.567073 · Cited by 450
Dorrell, D. G., Thomson, W. T., & Roach, S. (2002) · IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting · doi:10.1109/ias.1995.530349 · Cited by 367
A High-Resolution Frequency Estimation Method for Three-Phase Induction Machine Fault Detection
Kia, S. H., Henao, H., & Capolino, G.-A. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.899826 · Cited by 325
Daviu, J. A. A., Riera‐Guasp, M., Folch, J. R., & Palomares, M. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.876082 · Cited by 317
Self-citationNandi, S., Ahmed, S., & Toliyat, H. (2001) · IEEE Power Engineering Review · doi:10.1109/mper.2001.4311622 · Cited by 298
Ballal, M. S., Khan, Z. J., Suryawanshi, H. M., & Sonolikar, R. L. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.888789 · Cited by 251
Fault Detection in a Multistage Gearbox by Demodulation of Motor Current Waveform
Mohanty, A. R., & Kar, C. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.878303 · Cited by 235
Ordaz-Moreno, A., de Jesus Romero-Troncoso, R., Vite-Frias, J. A., Rivera-Gillen, J. R., & Garcia-Perez, A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918613 · Cited by 227
Martins, J. F., Pires, V. F., & Pires, A. J. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.888790 · Cited by 219
Current signature analysis of induction motor mechanical faults by wavelet packet decomposition
Ye, Z., Wu, B., & Sadeghian, A. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.819682 · Cited by 193
Ayhan, B., Chow, M.-Y., & Song, M.-H. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.878301 · Cited by 182
Broken Rotor Bar Detection in Induction Machines With Transient Operating Speeds
Douglas, H., Pillay, P., & Ziarani, A. K. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2004.842394 · Cited by 161
Schoen, R. R., & Habetler, T. G. (1997) · IEEE Transactions on Industry Applications · doi:10.1109/28.649970 · Cited by 154
Schoen, R. R., & Habetler, T. G. (2002) · Conference record · doi:10.1109/ias.1996.557108 · Cited by 143
Rajagopalan, S., Aller, J. M., Restrepo, J. A., Habetler, T. G., & Harley, R. G. (2007) · IEEE Industrial Electronics Magazine · doi:10.1109/tie.2007.894699 · Cited by 143
The Use of the Wavelet Approximation Signal as a Tool for the Diagnosis of Rotor Bar Failures
Riera‐Guasp, M., Daviu, J. A. A., Roger-Folch, J., et al. (2008) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2008.921432 · Cited by 137
Self-citationA novel detection method of motor broken rotor bars based on wavelet ridge
Zhang, Z., Ren, Z. X., & Huang, W. (2003) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2003.815851 · Cited by 120
Daviu, J. A. A., Jover, P., Riera‐Guasp, M., Arkkio, A., & Roger-Folch, J. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2007.01.008 · Cited by 89
Self-citationSupangat, R., Ertuğrul, N., Soong, W. L., Gray, D. A., Hansen, C. H., & Grieger, J. (2006) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20060060 · Cited by 84
Wavelet-based methods for the prognosis of mechanical and electrical failures in electric motors
Zanardelli, W. G., Strangas, E. G., Khalil, H. K., & Miller, J. M. (2003) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2003.10.002 · Cited by 58
Burnett, R., Watson, J. F., & ELDER, S. (1996) · Signal Processing · doi:10.1016/0165-1684(95)00146-8 · Cited by 50
Fault detection in induction motors as a result of transient analysis
ELDER, S., Watson, J. F., & Thomson, W. T. (1989) · International Electric Machines and Drives Conference · Cited by 34
Cited by
Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602
Self-citationAli, M. Z., Shabbir, M. N. S. K., Liang, X., Zhang, Y., & Hu, T. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2895797 · Cited by 349
Cost-Effective Condition Monitoring for Wind Turbines
Yang, W., Tavner, P. J., Crabtree, C. J., & Wilkinson, M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2032202 · Cited by 344
Soualhi, A., Clerc, G., & Razik, H. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2230598 · Cited by 264
Climente-Alarcon, V., Antonino-Daviu, J. A., Riera-Guasp, M., Puche-Panadero, R., & Escobar, L. (2012) · Electric Power Systems Research · doi:10.1016/j.epsr.2012.05.001 · Cited by 78
“The frequencies of these components are a particular case of the general expressions of the components amplified by the breakage, given by (9) and (10) [24-25].”
BackgroundMethodSelf-citation
Metadata
- Authors
- Riera-Guasp, M., Antonino-Daviu, J. A., Pineda-Sanchez, M., Puche-Panadero, R., & Perez-Cruz, J.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2008-12
- Volume
- 55
- Issue
- 12
- Pages
- 4167-4180
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2170547958
- Cited by
- 267
- References
- 32
- FWCI
- 36.40
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.