The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Multiphase Electric Machines for Variable-Speed Applications
Abstract
Although the concept of variable-speed drives, based on utilization of multiphase machines, dates back to the late 1960s, it was not until the mid- to late 1990s that multiphase drives became serious contenders for various applications. These include electric ship propulsion, locomotive traction, electric and hybrid electric vehicles, ldquomore-electricrdquo aircraft, and high-power industrial applications. As a consequence, there has been a substantial increase in the interest for such drive systems worldwide, resulting in a huge volume of work published during the last ten years. An attempt is made in this paper to provide a brief review of the current state of the art in the area. After addressing the reasons for potential use of multiphase rather than three-phase drives and the available approaches to multiphase machine designs, various control schemes are surveyed. This is followed by a discussion of the multiphase voltage source inverter control. Various possibilities for the use of additional degrees of freedom that exist in multiphase machines are further elaborated. Finally, multiphase machine applications in electric energy generation are addressed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Multiphase induction motor drives – a technology status review
Levi, E., Bojoi, R., Profumo, F., Toliyat, H. A., & Williamson, S. (2007) · IET Electric Power Applications · doi:10.1049/iet-epa:20060342 · Cited by 1,619
Self-citationSpace vector PWM control of dual three-phase induction machine using vector space decomposition
Zhao, Y., & Lipo, T. A. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.464525 · Cited by 1,311
Five-Phase Permanent-Magnet Motor Drives
Parsa, L., & Toliyat, H. A. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2004.841021 · Cited by 462
Fault-tolerant permanent magnet machinedrives
Mecrow, B. C., Jack, A. G., Haylock, J. A., & Coles, J. (1996) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:19960796 · Cited by 376
Disturbance-free operation of a multiphase current-regulated motor drive with an opened phase
Fu, J.-R., & Lipo, T. A. (1994) · IEEE Transactions on Industry Applications · doi:10.1109/28.315238 · Cited by 372
Improved Reliability in Solid-State AC Drives by Means of Multiple Independent Phase Drive Units
Jahns, T. M. (1980) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1980.4503793 · Cited by 358
Disturbance free operation of a multiphase current regulated motor drive with an opened phase
Fu, J.-R., & Lipo, T. A. (2002) · Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting · doi:10.1109/ias.1993.298884 · Cited by 318
Torque density improvement in a six-phase induction motor with third harmonic current injection
Lyra, R. O. C., & Lipo, T. A. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2002.802938 · Cited by 310
Levi, E., Jones, M., Vukosavic, S. N., & Toliyat, H. A. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.823241 · Cited by 274
Self-citationDesign and Testing of a Four-Phase Fault-Tolerant Permanent-Magnet Machine for an Engine Fuel Pump
Mecrow, B. C., Jack, A. G., Atkinson, D. J., Green, S. R., Atkinson, G. J., King, A., & Green, B. (2004) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2004.832074 · Cited by 252
Modeling and control of a multi-phase induction machine with structural unbalance
Zhao, Y., & Lipo, T. A. (1996) · IEEE Transactions on Energy Conversion · doi:10.1109/60.537028 · Cited by 216
Modeling and control of a multi-phase induction machine with structural unbalance
Zhao, Y., & Lipo, T. A. (1996) · IEEE Transactions on Energy Conversion · doi:10.1109/60.537009 · Cited by 198
Ryu, H.-M., Kim, J.-W., & Sul, S.-K. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.876074 · Cited by 187
A dual-bridge inverter approach to eliminating common-mode voltages and bearing and leakage currents
von Jauanne, A., & Zhang, H. (1999) · IEEE Transactions on Power Electronics · doi:10.1109/63.737591 · Cited by 174
Optimal torque control of fault-tolerant permanent magnet brushless machines
Wang, J., Atallah, K., & Howe, D. (2003) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2003.816707 · Cited by 162
Torque-ripple minimization in modular permanent-magnet brushless machines
Atallah, K., Wang, J., & Howe, D. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.818986 · Cited by 147
The Analysis of Losses in High-Power Fault-Tolerant Machines for Aerospace Applications
Atkinson, G. J., Mecrow, B. C., Jack, A. G., Atkinson, D. J., Sangha, P., & Benarous, M. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.880869 · Cited by 145
Toliyat, H. A., Waikar, S. P., & Lipo, T. A. (1998) · IEEE Transactions on Industry Applications · doi:10.1109/28.663476 · Cited by 141
Generic control method of multileg voltage-source-converters for fast practical implementation
Delarue, P., Bouscayrol, A., & Semail, E. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.809349 · Cited by 130
A high-torque low-speed multiphase brushless machine-a perspective application for electric vehicles
Simões, M. G., & Vieira, P. (2002) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2002.803241 · Cited by 124
Vectorial formalism for analysis and design of polyphase synchronous machines
Semail, E., Bouscayrol, A., & Hautier, J. P. (2003) · The European Physical Journal Applied Physics · doi:10.1051/epjap:2003034 · Cited by 92
Favourable slot and pole number combinations for fault-tolerant PM machines
Mitcham, A. J., Antonopoulos, G., & Cullen, J. J. A. (2004) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20040584 · Cited by 87
A novel direct torque control (DTC) method for five-phase induction machines
Toliyat, H. A., & Xu, H. (2002) · IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2000.826100 · Cited by 81
Effect of optimal torque control on rotor loss of fault-tolerant permanent-magnet brushless machines
Ede, J. D., Atallah, K., Wang, J., & Howe, D. (2002) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2002.802294 · Cited by 65
Abolhassani, M. T. (2005) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2005.195803 · Cited by 56
Vector control schemes for series-connected six-phase two-motor drive systems
LEVI, E., Vukosavić, S. N., & Jones, M. (2005) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20055018 · Cited by 54
Self-citationA New Transformerless Topology for AC-Fed Traction Vehicles Using Multi-Star Induction Motors
Steiner, M., Deplazes, R., & Stemmler, H. (2000) · EPE Journal · doi:10.1080/09398368.2000.11463469 · Cited by 53
The design of fault tolerant machines for aerospace applications
Atkinson, G. J., Mecrow, B. C., Jack, A. G., Atkinson, D. J., Sangha, P., & Benarous, M. (2005) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2005.195974 · Cited by 50
Multiple-phase permanent magnet synchronous machine supplied by VSIs, working under fault conditions
Martin, J., Meibody‐Tabar, F., & Davat, B. (2002) · doi:10.1109/ias.2000.882111 · Cited by 43
Torque Ripples Suppression for Six-Phase Induction Motors Under Open Phase Faults
Kianinezhad, R., Nahid‐Mobarakeh, B., Baghli, L., Bétin, F., & Capolino, G. (2006) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2006.348006 · Cited by 23
Štumberger, B., Štumberger, G., Hamler, A., Trlep, M., Jesenik, M., & Goričan, V. (2003) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2003.816251 · Cited by 21
Štumberger, B., Hamler, A., Trlep, M., Jesenik, M., & Goričan, V. (2003) · Springer eBooks · doi:10.1007/978-94-017-2494-4_32 · Cited by 12
Locment, F., Semail, E., & Kestely, X. (2005) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2005.219484 · Cited by 9
Cited by
Overview of Electric Motor Technologies Used for More Electric Aircraft (MEA)
Cao, W., Mecrow, B. C., Atkinson, G. J., Bennett, J. W., & Atkinson, D. J. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2165453 · Cited by 1,026
High-power wind energy conversion systems: State-of-the-art and emerging technologies
Yaramasu, V., Wu, B., Sen, P. C., Kouro, S., & Narimani, M. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2014.2378692 · Cited by 991
Recent Advances in the Design, Modeling, and Control of Multiphase Machines—Part I
Barrero, F., & Duran, M. J. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2447733 · Cited by 927
Transitioning to Physics-of-Failure as a Reliability Driver in Power Electronics
Wang, H., Liserre, M., Blaabjerg, F., de Place Rimmen, P., Jacobsen, J. B., Kvisgaard, T., & Landkildehus, J. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2290282 · Cited by 693
“nificant shift in the power converter design: multiphase power converters and machines [87], [88] and use of parallel or series connection of power converters [89], [90].”
BackgroundElectrical Motor Drivelines in Commercial All-Electric Vehicles: A Review
de Santiago, J., Bernhoff, H., Ekergård, B., Eriksson, S., Ferhatovic, S., Waters, R., & Leijon, M. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2011.2177873 · Cited by 669
Metadata
- Authors
- Levi, E.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2008-05
- Volume
- 55
- Issue
- 5
- Pages
- 1893-1909
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2154085245
- Cited by
- 2,157
- References
- 33
- FWCI
- 62.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.