The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Adaptive Speed Control for Permanent-Magnet Synchronous Motor System With Variations of Load Inertia
Abstract
Considering the variations of inertia in real applications, an adaptive control scheme for the permanent-magnet synchronous motor speed-regulation system is proposed in this paper. First, a composite control method, i.e., the extended-state-observer (ESO)-based control method, is employed to ensure the performance of the closed-loop system. The ESO can estimate both the states and the disturbances simultaneously so that the composite speed controller can have a corresponding part to compensate for the disturbances. Then, considering the case of variations of load inertia, an adaptive control scheme is developed by analyzing the control performance relationship between the feedforward compensation gain and the system inertia. By using inertia identification techniques, a fuzzy-inferencer-based supervisor is designed to automatically tune the feedforward compensation gain according to the identified inertia. Simulation and experimental results both show that the proposed method achieves a better speed response in the presence of inertia variations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Outline of a New Approach to the Analysis of Complex Systems and Decision Processes
Zadeh, L. A. (1973) · IEEE Transactions on Systems, Man, and Cybernetics · doi:10.1109/tsmc.1973.5408575 · Cited by 8,721
From PID to Active Disturbance Rejection Control
Han, J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2011621 · Cited by 6,803
A nonlinear disturbance observer for robotic manipulators
Chen, W.-H., Ballance, D. J., Gawthrop, P. J., & O'Reilly, J. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.857974 · Cited by 1,752
Disturbance Observer Based Control for Nonlinear Systems
Chen, W.-H. (2004) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2004.839034 · Cited by 1,452
Robust speed control of DC servomotors using modern two degrees-of-freedom controller design
Umeno, T., & Hori, Y. (1991) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.97556 · Cited by 723
Robust motion controller design for high-accuracy positioning systems
Lee, H. S., & Tomizuka, M. (1996) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.481407 · Cited by 436
A DSP-Based Active Disturbance Rejection Control Design for a 1-kW H-Bridge DC–DC Power Converter
Sun, B., & Gao, Z. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.855679 · Cited by 368
Mohamed, Y. A.-R. I. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.895074 · Cited by 324
Baik, I.-C., Kim, K.-H., & Youn, M.-J. (2000) · IEEE Transactions on Control Systems Technology · doi:10.1109/87.817691 · Cited by 322
Su, Y. X., Zheng, C. H., & Duan, B. Y. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.847583 · Cited by 315
Nonlinear control of interior permanent-magnet synchronous motor
Rahman, M. A., Vilathgamuwa, D. M., Uddin, M. N., & Tseng, K.-J. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.808932 · Cited by 303
Back, J., & Shim, H. (2008) · Automatica · doi:10.1016/j.automatica.2008.02.024 · Cited by 241
Disturbance-Rejection High-Precision Motion Control of a Stewart Platform
Su, Y. X., Duan, B. Y., Zheng, C. H., Zhang, Y. F., Chen, G. D., & Mi, J. W. (2004) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2004.824315 · Cited by 209
An Analysis of Parameter Variations of Disturbance Observer for Motion Control
Kobayashi, H., Katsura, S., & Ohnishi, K. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.905948 · Cited by 202
Design of a nonlinear disturbance observer
Chen, X., Komada, S., & Fukuda, T. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.836359 · Cited by 182
Comments on Active Disturbance Rejection Control
Sun, D. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.909047 · Cited by 166
New motion control with inertia identification function using disturbance observer
Awaya, I., Kato, Y., Miyake, I., & Itō, M. (2003) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.1992.254601 · Cited by 84
Nonlinear control of synchronous servo drive
Grc̆ar, B., Cafuta, P., Žnidarič, M., & Gausch, F. (1996) · IEEE Transactions on Control Systems Technology · doi:10.1109/87.486344 · Cited by 65
Cited by
Active disturbance rejection control: Methodology and theoretical analysis
Huang, Y., & Xue, W. (2014) · ISA Transactions · doi:10.1016/j.isatra.2014.03.003 · Cited by 892
Speed Control for PMSM Servo System Using Predictive Functional Control and Extended State Observer
Liu, H., & Li, S. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2162217 · Cited by 774
Self-citationZhang, X., Sun, L., Zhao, K., & Sun, L. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2206610 · Cited by 725
Disturbance/Uncertainty Estimation and Attenuation Techniques in PMSM Drives—A Survey
Yang, J., Chen, W.-H., Li, S., Guo, L., & Yan, Y. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2583412 · Cited by 695
Self-citationAdaptive Prescribed Performance Motion Control of Servo Mechanisms with Friction Compensation
Na, J., Chen, Q., Ren, X., & Guo, Y. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2240635 · Cited by 523
Metadata
- Authors
- Li, S., & Liu, Z.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2009-08
- Volume
- 56
- Issue
- 8
- Pages
- 3050-3059
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2145890255
- Cited by
- 676
- References
- 18
- FWCI
- 14.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.