The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
A Bidirectional Three-Level DC–DC Converter for the Ultracapacitor Applications
Abstract
Electrochemical double-layer capacitors, which are well known as ultracapacitors, have intensively been used in power conversion applications such as controlled electric drives, active filters, power conditioners, and uninterruptible power supplies. The ultracapacitor is employed as the energy storage device that can be fully charged/discharged within a few seconds. To achieve better flexibility and efficiency, the ultracapacitor is connected to the power conversion system via an interfacing dc-dc power converter. Various topologies are used as the dc-dc power converter: nonisolated two-level single-phase or multiphase interleaved converters and many varieties of isolated soft-switched dc-dc converters. A three-level nonisolated dc-dc converter as a candidate for ultracapacitor applications is proposed and analyzed in this paper. The topology is theoretically analyzed, and design guidelines are given. The modeling and control aspects are discussed. A 5.5-kW prototype was designed, and the proposed topology was experimentally verified on a general-purpose controlled electric drive. Experimental results are presented and discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Venkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H. (2003) · 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings. · doi:10.1109/cipe.2002.1196712 · Cited by 1,145 · cited 2×
“where k, α, and β are the material constants, f is the frequency, B is the peak flux density, and B(t) is the instantaneous value of the flux density [34], [35].”
BackgroundHigh-power density design of a soft-switching high-power bidirectional dc–dc converter
Zhang, J., Lai, J.-S., Kim, R.-Y., & Yu, W. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.900462 · Cited by 411
Automotive DC-DC bidirectional converter made with many interleaved buck stages
Garcia, O., Zumel, P., de Castro, A., & Cobos, A. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.872379 · Cited by 405
A Practical, Accurate and Very General Core Loss Model for Nonsinusoidal Waveforms
Roshen, W. A. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.886608 · Cited by 232
Cited by
Extreme Fast Charging of Electric Vehicles: A Technology Overview
Tu, H., Feng, H., Srdic, S., & Lukic, S. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2958709 · Cited by 898
Safayatullah, M., Elrais, M. T., Ghosh, S., Rezaii, R., & Batarseh, I. (2022) · IEEE Access · doi:10.1109/access.2022.3166935 · Cited by 615
“Another way of decreasing the voltage stress on the switches is to use a non-isolated three-level dc-dc converter which allows to choose lower rated switches as well as high frequency operation [175]-[180].”
BackgroundReview on Advanced Control Technologies for Bidirectional DC/DC Converters in DC Microgrids
Xu, Q., Vafamand, N., Chen, L., Dragicevic, T., Xie, L., & Blaabjerg, F. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.2978064 · Cited by 439
Regenerative Braking System of Electric Vehicle Driven by Brushless DC Motor
Nian, X., Peng, F., & Zhang, H. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2300059 · Cited by 376
Khalid, M. R., Khan, I. A., Hameed, S., Asghar, M. S. J., & Ro, J. (2021) · IEEE Access · doi:10.1109/access.2021.3112189 · Cited by 353
Metadata
- Authors
- Grbovic, P. J., Delarue, P., Le Moigne, P., & Bartholomeus, P.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2010-10
- Volume
- 57
- Issue
- 10
- Pages
- 3415-3430
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2146152751
- Cited by
- 248
- References
- 4
- FWCI
- 8.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.