The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Optimal Design and Tradeoff Analysis of Planar Transformer in High-Power DC–DC Converters
Abstract
The trend toward high power density, high operating frequency, and low profile in power converters has exposed a number of limitations in the use of conventional wire-wound magnetic component structures. A planar magnetic is a low-profile transformer or inductor utilizing planar windings, instead of the traditional windings made of Cu wires. In this paper, the most important factors for planar transformer (PT) design including winding loss, core loss, leakage inductance, and stray capacitance have individually been investigated. The tradeoffs among these factors have to be analyzed in order to achieve optimal parameters. Combined with an application, four typical winding arrangements have been compared to illustrate their advantages and disadvantages. An improved interleaving structure with optimal behaviors is proposed, which constructs the top layer paralleling with the bottom layer and then in series with the other turns of the primary, so that a lower magnetomotive force ratio$m$can be obtained, as well as minimized ac resistance, leakage inductance, and even stray capacitance. A 1.2-kW full-bridge dc–dc converter prototype employing the improved PT structure has been constructed, over 96% efficiency is achieved, and a 2.7% improvement, compared with the noninterleaving structure, is obtained.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effects of eddy currents in transformer windings
Dowell, P. L. (1966) · Proceedings of the Institution of Electrical Engineers · doi:10.1049/piee.1966.0236 · Cited by 1,438
Venkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H. (2003) · 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings. · doi:10.1109/cipe.2002.1196712 · Cited by 1,145
Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation
Reinert, J., Brockmeyer, A., & De Doncker, R. W. A. A. (2001) · IEEE Transactions on Industry Applications · doi:10.1109/28.936396 · Cited by 704
Improved analytical modeling of conductive losses in magnetic components
Ferreira, J. A. (1994) · IEEE Transactions on Power Electronics · doi:10.1109/63.285503 · Cited by 629
Soft Ferrites—Properties and Applications
Brailsford, F. (1970) · Electronics and Power · doi:10.1049/ep.1970.0192 · Cited by 613
Improved calculation of core loss with nonsinusoidal waveforms
Li, J., Abdallah, T., & Sullivan, C. R. (2002) · Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248) · doi:10.1109/ias.2001.955931 · Cited by 531
Lin, D., Zhou, P., Fu, W. N., Badics, Z., & Cendes, Z. J. (2004) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2004.825025 · Cited by 425
Soft ferrites: properties and applications
Snelling, E. C. (1969) · CERN Document Server (European Organization for Nuclear Research) · Cited by 415
Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation
Reinert, J., Brockmeyer, A., & De Doncker, R. W. (2003) · Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370) · doi:10.1109/ias.1999.806023 · Cited by 409
Optimizing the AC resistance of multilayer transformer windings with arbitrary current waveforms
Hurley, W. G., Gath, E., & Breslin, J. G. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.838110 · Cited by 368
High-Efficiency Isolated Boost DC–DC Converter for High-Power Low-Voltage Fuel-Cell Applications
Nymand, M., & Andersen, M. A. E. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2036024 · Cited by 312
Self-citationSelf-Capacitance of High-Voltage Transformers
Dalessandro, L., da Silveira Cavalcante, F., & Kolar, J. W. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.904252 · Cited by 305
An improved calculation of proximity-effect loss in high-frequency windings of round conductors
Nan, X., & Sullivan, C. R. (2003) · IEEE 34th Annual Conference on Power Electronics Specialist, 2003. PESC '03. · doi:10.1109/pesc.2003.1218168 · Cited by 269
Experimental determination of stray capacitances in high frequency transformers
Lu, H. Y., Zhu, J. G., & Hui, S. Y. R. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.816186 · Cited by 236
A Practical, Accurate and Very General Core Loss Model for Nonsinusoidal Waveforms
Roshen, W. A. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.886608 · Cited by 232
Global Loss Evaluation Methods for Nonsinusoidally Fed Medium-Frequency Power Transformers
Villar, I., Viscarret, U., Etxeberria-Otadui, I., & Rufer, A. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2021174 · Cited by 197
Comparison of various methods for calculating the AC resistance of inductors
Reatti, A., & Kazimierczuk, M. K. (2002) · IEEE Transactions on Magnetics · doi:10.1109/20.999124 · Cited by 169
Measurement and loss model of ferrites with non-sinusoidal waveforms
den Bossche, A. V., Valchev, V. C., & Georgiev, G. B. (2004) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2004.1354851 · Cited by 139
A review of planar magnetic techniques and technologies
Quinn, C., Rinne, K., O’Donnell, T., Duffy, M. C., & Mathúna, C. Ó. (2002) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2001.912514 · Cited by 108
Ouyang, Z., Thomsen, O. C., & Andersen, M. A. E. (2009) · International Conference on Power Electronics and Drive Systems · doi:10.1109/peds.2009.5385844 · Cited by 102
Self-citationSnelling, D. (1991) · Cited by 28
Cited by
Georgilakis, P. S., & Hatziargyriou, N. D. (2015) · Electric Power Systems Research · doi:10.1016/j.epsr.2014.12.010 · Cited by 414
Overview of Planar Magnetic Technology—Fundamental Properties
Ouyang, Z., & Andersen, M. A. E. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2283263 · Cited by 350
Self-citationBidirectional Onboard Chargers for Electric Vehicles: State-of-the-Art and Future Trends
Wouters, H., & Martinez, W. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3319996 · Cited by 280
Li, B., Li, Q., & Lee, F. C. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2874806 · Cited by 211
Zhang, Z., Liu, C., Wang, M., Si, Y., Liu, Y., & Lei, Q. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2980313 · Cited by 137
Metadata
- Authors
- Ouyang, Z., Thomsen, O. C., & Andersen, M. A. E.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2012-07
- Volume
- 59
- Issue
- 7
- Pages
- 2800-2810
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2041804496
- Cited by
- 393
- References
- 21
- FWCI
- 9.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.