The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Motor Bearing Fault Diagnosis Using Trace Ratio Linear Discriminant Analysis
Abstract
Bearings are critical components in induction motors and brushless direct current motors. Bearing failure is the most common failure mode in these motors. By implementing health monitoring and fault diagnosis of bearings, unscheduled maintenance and economic losses caused by bearing failures can be avoided. This paper introduces trace ratio linear discriminant analysis (TR-LDA) to deal with high-dimensional non-Gaussian fault data for dimension reduction and fault classification. Motor bearing data with single-point faults and generalized-roughness faults are used to validate the effectiveness of the proposed method for fault diagnosis. Comparisons with other conventional methods, such as principal component analysis, local preserving projection, canonical correction analysis, maximum margin criterion, LDA, and marginal Fisher analysis, show the superiority of TR-LDA in fault diagnosis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
THE USE OF MULTIPLE MEASUREMENTS IN TAXONOMIC PROBLEMS
FISHER, R. A. (1936) · Annals of Eugenics · doi:10.1111/j.1469-1809.1936.tb02137.x · Cited by 15,227
Nonlinear Dimensionality Reduction by Locally Linear Embedding
Roweis, S. T., & Saul, L. K. (2000) · Science · doi:10.1126/science.290.5500.2323 · Cited by 14,965
A Global Geometric Framework for Nonlinear Dimensionality Reduction
Tenenbaum, J. B., Silva, V. D., & Langford, J. C. (2000) · Science · doi:10.1126/science.290.5500.2319 · Cited by 13,585
Introduction to Statistical Pattern Recognition
(1990) · Elsevier eBooks · doi:10.1016/c2009-0-27872-x · Cited by 11,031
Orthonormal bases of compactly supported wavelets
Daubechies, I. (1988) · Communications on Pure and Applied Mathematics · doi:10.1002/cpa.3160410705 · Cited by 8,190
Face recognition using Laplacianfaces
He, X., Yan, S., Hu, Y., Niyogi, P., & Zhang, H.-J. (2005) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2005.55 · Cited by 3,264
Canonical Correlation Analysis: An Overview with Application to Learning Methods
Hardoon, D. R., Szedmak, S., & Shawe-Taylor, J. (2004) · Neural Computation · doi:10.1162/0899766042321814 · Cited by 3,202
Graph Embedding and Extensions: A General Framework for Dimensionality Reduction
Yan, S., Xu, D., Zhang, B., Zhang, H.-J., Yang, Q., & Lin, S. (2007) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2007.250598 · Cited by 3,031
Rolling element bearing diagnostics—A tutorial
Randall, R. B., & Antoni, J. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.07.017 · Cited by 2,744
Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review
Nandi, S., Toliyat, H. A., & Li, X. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847955 · Cited by 2,382
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
Efficient and Robust Feature Extraction by Maximum Margin Criterion
Li, H., Jiang, T., & Zhang, K. (2006) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2005.860852 · Cited by 841
Neural-network-based motor rolling bearing fault diagnosis
Li, B., Chow, M.-Y., Tipsuwan, Y., & Hung, J. C. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873214 · Cited by 797
Dimension Reduction by Local Principal Component Analysis
Kambhatla, N., & Leen, T. K. (1997) · Neural Computation · doi:10.1162/neco.1997.9.7.1493 · Cited by 717
Dimensionality Reduction of Multimodal Labeled Data by Local Fisher Discriminant Analysis
SugiyamaMasashi (2007) · Journal of Machine Learning Research · doi:10.5555/1248659.1248694 · Cited by 703
Curvilinear component analysis: a self-organizing neural network for nonlinear mapping of data sets
Demartines, P., & Herault, J. (1997) · IEEE Transactions on Neural Networks · doi:10.1109/72.554199 · Cited by 649
Fault Detection in Induction Machines Using Power Spectral Density in Wavelet Decomposition
Cusid�Cusido, J., Romeral, L., Ortega, J. A., Rosero, J. A., & Garc�aGarcia Espinosa, A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.911960 · Cited by 512
Locality sensitive discriminant analysis
Cai, D., Han, J., He, X., Zhou, K., & Bao, H. (2008) · Cited by 506
Prieto, M. D., Cirrincione, G., Espinosa, A. G., Ortega, J. A., & Henao, H. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2219838 · Cited by 461
Tse, P. W., Peng, Y. H., & Yam, R. (2001) · Journal of Vibration and Acoustics · doi:10.1115/1.1379745 · Cited by 422
Ye, J. (2005) · Cited by 353
Trace Ratio vs. Ratio Trace for Dimensionality Reduction
Wang, H., Yan, S., Xu, D., Tang, X., & Huang, T. (2007) · 2007 IEEE Conference on Computer Vision and Pattern Recognition · doi:10.1109/cvpr.2007.382983 · Cited by 349
Statistical analysis of sound and vibration signals for monitoring rolling element bearing condition
Heng, R. B. W., & Nor, M. J. M. (1998) · Applied Acoustics · doi:10.1016/s0003-682x(97)00018-2 · Cited by 333
Jia, Y., Nie, F., & Zhang, C. (2009) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2009.2015760 · Cited by 284
New clustering algorithm-based fault diagnosis using compensation distance evaluation technique
Lei, Y., He, Z., Zi, Y., & Chen, X. (2008) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2007.07.013 · Cited by 244
An Amplitude Modulation Detector for Fault Diagnosis in Rolling Element Bearings
Stack, J. R., Harley, R. G., & Habetler, T. G. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.834971 · Cited by 224
Immovilli, F., Cocconcelli, M., Bellini, A., & Rubini, R. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2025288 · Cited by 201
Diagnostics and Prognostics Method for Analog Electronic Circuits
Vasan, A. S. S., Long, B., & PECHT, M. G. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2224074 · Cited by 192
Self-citationAyhan, B., Chow, M.-Y., & Song, M.-H. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.878301 · Cited by 182
Application of statistical moments to bearing failure detection
Martin, H. R., & Honarvar, F. (1995) · Applied Acoustics · doi:10.1016/0003-682x(94)p4420-b · Cited by 168
Yu, J. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2167893 · Cited by 167
Bearing Fault Detection Via Stator Current Noise Cancellation and Statistical Control
Zhou, W., Habetler, T. G., & Harley, R. G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2005018 · Cited by 165
Induction Machine Fault Diagnostic Analysis With Wavelet Technique
Chow, T. W. S., & Su, H. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.825325 · Cited by 158
Self-citationStrangas, E. G., Aviyente, S., & Zaidi, S. S. H. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007529 · Cited by 148
Online Anomaly Detection for Hard Disk Drives Based on Mahalanobis Distance
Wang, Y., Miao, Q., Ma, E. W. M., Tsui, K., & PECHT, M. G. (2013) · IEEE Transactions on Reliability · doi:10.1109/tr.2013.2241204 · Cited by 110
Self-citationA Two-Step Parametric Method for Failure Prediction in Hard Disk Drives
Wang, Y., Ma, E. W. M., Chow, T. W. S., & Tsui, K. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2013.2264060 · Cited by 102
Self-citationHealth Monitoring of Cooling Fans Based on Mahalanobis Distance With mRMR Feature Selection
Jin, X., Ma, E. W. M., Cheng, L. L., et al. (2012) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2012.2187240 · Cited by 98
Self-citationA New Bearing Fault Detection Method in Induction Machines Based on Instantaneous Power Factor
Ibrahim, A., Badaoui, M. E., Guillet, F., & Bonnardot, F. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2003211 · Cited by 88
HOS-based nonparametric and parametric methodologies for machine fault detection
Chow, T. W. S., & Tan, H. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873213 · Cited by 88
Self-citationJin, X., & Chow, T. W. S. (2013) · Expert Systems with Applications · doi:10.1016/j.eswa.2013.04.024 · Cited by 86
Self-citationEnergy-Based Feature Extraction for Defect Diagnosis in Rotary Machines
Yan, R., & Gao, R. X. (2009) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2009.2016886 · Cited by 86
Zhao, M., Zhang, Z., & Chow, T. W. S. (2011) · Pattern Recognition · doi:10.1016/j.patcog.2011.10.008 · Cited by 73
Self-citationTensor Locally Linear Discriminative Analysis
Zhang, Z., & Chow, W. S. (2011) · IEEE Signal Processing Letters · doi:10.1109/lsp.2011.2165538 · Cited by 26
Robust linearly optimized discriminant analysis
Zhang, Z., & Chow, T. W. S. (2011) · Neurocomputing · doi:10.1016/j.neucom.2011.10.015 · Cited by 22
Self-citation
Cited by
Highly Accurate Machine Fault Diagnosis Using Deep Transfer Learning
Shao, S., McAleer, S., Yan, R., & Baldi, P. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2864759 · Cited by 1,635
Lei, Y., Jia, F., Lin, J., Xing, S., & Ding, S. X. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2519325 · Cited by 1,191
Deep Learning Algorithms for Bearing Fault Diagnostics—A Comprehensive Review
Zhang, S., Zhang, S., Wang, B., & Habetler, T. G. (2020) · IEEE Access · doi:10.1109/access.2020.2972859 · Cited by 913
A novel deep autoencoder feature learning method for rotating machinery fault diagnosis
Shao, H., Jiang, H., Zhao, H., & Wang, F. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.03.034 · Cited by 684
Tian, J., Morillo, C., Azarian, M. H., & Pecht, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2509913 · Cited by 488
Self-citation
Metadata
- Authors
- Jin, X., Zhao, M., Chow, T. W. S., & Pecht, M.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2014-05
- Volume
- 61
- Issue
- 5
- Pages
- 2441-2451
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2002106843
- Cited by
- 423
- References
- 44
- FWCI
- 37.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.