The DOI matches its Crossref record.
Maximum Efficiency Point Tracking Technique for $LLC$-Based PEV Chargers Through Variable DC Link Control
Abstract
In this paper, a variable dc link technique is proposed to track the maximum efficiency point of the LLC converter for plug-in electric vehicle battery-charging applications over a wide battery state-of-charge (SOC) range. With the proposed variable dc link control approach, the dc link voltage follows the battery pack voltage. The operating point of the LLC converter is always constrained to the proximity of the primary resonant frequency so that the circulating current in the magnetizing inductor and the turning-off currents of MOSFETs are minimized. In comparison with conventional approaches, the proposed variable dc link voltage methodology demonstrates efficiency improvement across the wide SOC range. Efficiency improvements of 2.1% at the heaviest load condition and 9.1% at the lightest load condition are demonstrated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Extreme Fast Charging of Electric Vehicles: A Technology Overview
Tu, H., Feng, H., Srdic, S., & Lukic, S. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2958709 · Cited by 898
He, P., & Khaligh, A. (2017) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2016.2630927 · Cited by 501
Self-citationA PWM LLC Type Resonant Converter Adapted to Wide Output Range in PEV Charging Applications
Wang, H., & Li, Z. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2713815 · Cited by 291
Self-citationRafi, M. A. H., & Bauman, J. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3015743 · Cited by 264
Rajendran, G., Vaithilingam, C. A., Misron, N., Naidu, K., & Ahmed, M. R. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103099 · Cited by 247
A 300-kHz 6.6-kW SiC Bidirectional LLC Onboard Charger
Li, H., Zhang, Z., Wang, S., Tang, J., Ren, X., & Chen, Q. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2910048 · Cited by 237
Zhang, Z., Liu, C., Wang, M., Si, Y., Liu, Y., & Lei, Q. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2980313 · Cited by 137
Hybrid PWM-Resonant Converter for Electric Vehicle On-Board Battery Chargers
Lee, I.-O. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2456635 · Cited by 134
“Among various battery charging algorithms for the battery in EVs, the constant-current (CC) and constant-voltage (CV) charging method is the most robust and effective, and thus is widely applied to the charger applications [5], [6].”
MethodHybrid DC–DC converter with phase-shift or frequency modulation for NEV battery charger
Lee, I.-O. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2477345 · Cited by 81
Design of 1 kW bidirectional half-bridge CLLC converter for electric vehicle charging systems
He, P., & Khaligh, A. (2016) · 2016 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES) · doi:10.1109/pedes.2016.7914445 · Cited by 46
Self-citation3.3kW CLLC converter with synchronous rectification for plug-in electric vehicles
Zou, S., Lu, J., Mallik, A., & Khaligh, A. (2017) · 2017 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.2017.8101708 · Cited by 39
“In selection of the DC/DC stage topology for traditional onboard chargers, LLC resonant converter is a suitable candidate for unidirectional grid-to-vehicle (G2V) chargers due to its high efficiency and wide output range [1-2].”
BackgroundSelf-citationA SiC Bidirectional LLC On-Board Charger
Li, H., Wang, S., Zhang, Z., Tang, J., Ren, X., & Chen, Q. (2019) · 2019 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2019.8722324 · Cited by 32
“It should be noted that in the proposed control, the LLC switching frequency still varies in a low range to eliminate the double-line frequency ripple which is quite different from a DC transformer with a fixed switching frequency in [15].”
BackgroundVariable CLLC Topology Structure Technique for a Bidirectional on Board Charger of Electric Vehicle
Qu, L., Wang, X., Bai, Z., & Liu, Y. (2019) · 2019 4th International Conference on Power and Renewable Energy (ICPRE) · doi:10.1109/icpre48497.2019.9034808 · Cited by 9
Metadata
- Authors
- Wang, H., Dusmez, S., & Khaligh, A.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2014-11
- Volume
- 61
- Issue
- 11
- Pages
- 6041-6049
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2046624071
- Cited by
- 182
- References
- 0
- FWCI
- 10.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.