Circulating Current Injection Methods Based on Instantaneous Information for the Modular Multilevel Converter
Open accessThe DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Abstract
This paper studies different circulating current references for the modular multilevel converter. The circulating current references are obtained from the instantaneous values of the output current and modulation signal of the phase leg. Therefore, the determination of the amplitude and phase of the output current is not needed, which is a significant improvement compared to other methods such as those based on injecting specific harmonics in the circulating currents. Among the different methods studied in this paper, a new method is introduced, which is able to reduce the capacitor voltage ripples compared to the other methods. A closed-loop control is also proposed which is able to track the circulating current references. With the discussed methods, the average values of the capacitor voltages are maintained at their reference while the voltage ripples are kept low. Experimental results are presented to demonstrate the effectiveness of the proposed and discussed methods.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Recent Advances and Industrial Applications of Multilevel Converters
Kouro, S., Malinowski, M., Gopakumar, K., Pou, J., Franquelo, L. G., Wu, B., Rodriguez, J., Pérez, M. A., & Leon, J. I. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049719 · Cited by 3,872 · cited 1×
“Among various multilevel converter topologies [1], the modular multilevel converter (MMC) [2]–[6] offers several salient features”
BackgroundSelf-citationAn innovative modular multilevel converter topology suitable for a wide power range
Lesnicar, A., & Marquardt, R. (2004) · 2003 IEEE Bologna Power Tech Conference Proceedings, · doi:10.1109/ptc.2003.1304403 · Cited by 2,908
Operation, Control, and Applications of the Modular Multilevel Converter: A Review
Debnath, S., Qin, J., Bahrani, B., Saeedifard, M., & Barbosa, P. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2309937 · Cited by 2,210 · cited 1×
“Among various multilevel converter topologies [1], the modular multilevel converter (MMC) [2]–[6] offers several salient features”
BackgroundControl and Experiment of Pulsewidth-Modulated Modular Multilevel Converters
Hagiwara, M., & Akagi, H. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2014236 · Cited by 1,565
Tu, Q., Xu, Z., & Xu, L. (2011) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2011.2115258 · Cited by 1,387 · cited 2×
“Three references are obtained for the circulating current, and the first one injects only a dc component, which is based on [21] and [22].”
BackgroundCircuit Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters
Perez, M. A., Bernet, S., Rodriguez, J., Kouro, S., & Lizana, R. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2310127 · Cited by 1,346
Dynamic Performance of a Modular Multilevel Back-to-Back HVDC System
Saeedifard, M., & Iravani, R. (2010) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2010.2050787 · Cited by 1,188 · cited 2×
“2336608 which make it a potential candidate for various applications, including high-voltage-direct-current transmission systems [7]–[9], flexible-alternating-current-transmission-system controllers [10], photovoltaic generation [11], wind turbine applications [12], and motor drives [13]–[15].”
BackgroundClassification, Terminology, and Application of the Modular Multilevel Cascade Converter (MMCC)
Akagi, H. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143431 · Cited by 1,172
Dynamic Analysis of Modular Multilevel Converters
Harnefors, L., Antonopoulos, A., Norrga, S., Angquist, L., & Nee, H.-P. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2194974 · Cited by 623
A new modular voltage source inverter topology
Marquardt, R. (2003) · Medical Entomology and Zoology · Cited by 503
Cited by
Items 101–200 of 404
Alternate Arm Converter Energy Balancing Under Parameter Variation
Wickramasinghe, H. R., Konstantinou, G. S., Ceballos, S., & Pou, J. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2867223 · Cited by 33
“Average stored energy difference between two arms of an MMC phase-leg caused by unbalanced arm impedances is balanced injecting a common mode fundamental component to the circulating current [11].”
BackgroundSelf-citationChakraborty, R., Samantaray, J., Dey, A., & Chakrabarty, S. (2021) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2021.3124982 · Cited by 32
“conventional modulation techniques to be used in MMC [4]–[7].”
MethodOverview on reliability of modular multilevel cascade converters
Zhao, Z., Li, K., Jiang, Y., Lu, S., & Yuan, L. (2015) · Chinese Journal of Electrical Engineering · doi:10.23919/cjee.2015.7933136 · Cited by 28
“The output current should be controlled to satisfy the requirement of the given operating condition, while the circulating current is a freedom which can be used to reduce the capacitor voltage fluctuation([36]) and balance the capacitors’ voltages([37]).”
BackgroundDarus, R., Pou, J., Konstantinou, G. S., Ceballos, S., & Agelidis, V. G. (2014) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2014.6803318 · Cited by 34
Self-citationInvestigation of MMC-HVDC operating region by circulating current control under grid imbalances
Li, J., Konstantinou, G. S., Wickramasinghe, H. R., Pou, J., Wu, X., & Jin, X. (2017) · Electric Power Systems Research · doi:10.1016/j.epsr.2017.07.003 · Cited by 27
Self-citationLin, L., Li, A., Xu, C., & Wang, Y. (2020) · IEEE Access · doi:10.1109/access.2020.2995293 · Cited by 30
An MMC Circulating Current Suppressing Controller Based on Bridge Arm Common-Mode Voltage
Yang, Z., Song, P., Song, J. C., Wang, X., & Li, X. S. (2020) · IEEE Access · doi:10.1109/access.2020.3031307 · Cited by 27
Arm-Current-Sensorless Circulating Current Control of MMC
Reddy, G. A., & Shukla, A. (2021) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2021.3120976 · Cited by 29
“The SHVC results in ripples in the SMs capacitor voltage and hence it should be minimized/suppressed for limiting these ripples [14].”
BackgroundMethodInfluentialModel Predictive Control in Multilevel Inverters Part II: Renewable Energies and Grid Applications
Norambuena, M., Mora, A., Garcia, C. F., Rodríguez, J., Aly, M., Carnielutti, F. D. M., Pereda, J. E., Castillo, C., Zhang, Z., Yaramasu, V., et al. (2024) · IEEE Open Journal of Industry Applications · doi:10.1109/ojia.2024.3460668 · Cited by 32
“Therefore, the PS-MPC scheme improves the MMC performance compared with the traditional PI-based control scheme with decoupled control of the circulating currents and output currents [139], [141].”
BackgroundMethodRodriguez-Bernuz, J.-M., & Junyent‐Ferré, A. (2019) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2019.2908695 · Cited by 25
“requirements can be reduced [9]–[11].”
Wang, H., Yang, S., Chen, H., Feng, X., & Blaabjerg, F. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2993284 · Cited by 27
“The normally implemented circulating current control strategies target at eliminating or restraining the second-order harmonics [20, 27].”
BackgroundCapacitor Voltage Reduction in Modular Multilevel Converters Under Grid Voltages Unbalances
Li, J., Konstantinou, G., Wickramasinghe, H. R., Townsend, C. D., & Pou, J. (2020) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2019.2919788 · Cited by 24
“The calculation of circulating current references obtained from instantaneous information is shown in [12].”
BackgroundSelf-citationComparison of bipolar sub-modules for the alternate arm converter
Wickramasinghe, H. R., Konstantinou, G. S., & Pou, J. (2017) · Electric Power Systems Research · doi:10.1016/j.epsr.2017.01.023 · Cited by 25
Self-citationEstimation Methods and Sensor Reduction in Modular Multilevel Converters: A Review
Konstantinou, G. S., Wickramasinghe, H. R., Townsend, C. D., Ceballos, S., & Pou, J. (2018) · International Conference on Power and Energy Systems (ICPES) · doi:10.1109/icpesys.2018.8626987 · Cited by 26
“However, it requires an accurate knowledge of the phase and the amplitude of the phase current, introducing additional delays especially under operation with ac distortions and imbalances [27].”
BackgroundSelf-citationRonanki, D., & Williamson, S. S. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2922206 · Cited by 24
“The upper and lower arm currents (ixu , ixl) can be expressed as [9] ixu = icom + ixz (1) ixl = −icom + ixz (2)”
BackgroundLiang, G., Tafti, H. D., Farivar, G. G., Pou, J., Townsend, C. D., Konstantinou, G. S., & Ceballos, S. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3091934 · Cited by 25
Self-citationProviding dc fault ride-through capability to H-bridge MMC-based HVDC networks
Kontos, E., Pinto, R. T., & Bauer, P. (2015) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.1109/icpe.2015.7167983 · Cited by 22
“Therefore, by controlling this second harmonic current to zero, the converter power losses can be minimized [20].”
BackgroundCapacitor voltage ripple minimization in modular multilevel converters
Pérez, M. A., & Bernet, S. (2015) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2015.7125544 · Cited by 21
“The required references can be generated on-line but the the voltage ripple reduction is limited [24].”
BackgroundMarzoughi, A., Burgos, R. P., Boroyevich, D., & Xue, Y. S. (2015) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel.2015.7236451 · Cited by 22
“In a similar way, references [17] and [18] have also tried to use the circulating current as a degree of freedom to reduce the capacitor voltage ripple in MMC converter.”
MethodWang, S., Bao, D., Gontijo, G., Chaudhary, S. K., & Teodorescu, R. (2021) · Energies · doi:10.3390/en14030651 · Cited by 25
“One strategy for reducing the submodule-capacitor ripple is by injecting specific AC circulating-current components, as proposed in [21,22].”
BackgroundSun, P., Wang, Y., Khalid, M., Blasco-Giménez, R., & Konstantinou, G. S. (2022) · Electric Power Systems Research · doi:10.1016/j.epsr.2022.108798 · Cited by 22
Self-citationThe Hybrid-Legs Bridge Converter: A Flexible and Compact VSC-HVDC Topology
Ghat, M. B., Patro, S. K., & Shukla, A. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3015788 · Cited by 21
“Besides, it also necessitates a large number of capacitors [7]– [13].”
BackgroundJo, Y.-J., Nguyen, T. H., & Lee, D. (2016) · Journal of Power Electronics · doi:10.6113/jpe.2016.16.5.1752 · Cited by 21
“The initial phase angle of the injected current is selected as [24], [26]: inj j j π = + (10) where j is the phase shift between the grid voltage and current.”
BackgroundActive thermal balancing for modular multilevel converters in HVDC applications
Hahn, F., Buticchi, G., & Liserre, M. (2016) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2016.7695611 · Cited by 23
Yang, W., Song, Q., & Zhao, B. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2910456 · Cited by 23
“When proper second harmonic circulating current is injected, the voltage fluctuation on capacitors can be suppressed, and the ESR can be reduced [7], [8].”
BackgroundThakur, S. S., Odavić, M., Allu, A. A., Zhu, Z. Q., & Atallah, K. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3108877 · Cited by 21
Samajdar, D., & Bhattacharya, T. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3150570 · Cited by 21
Huang, S., Liao, W., Liu, P., Tang, W., & Huang, S. (2016) · IET Power Electronics · doi:10.1049/iet-pel.2015.0418 · Cited by 21
Ghat, M. B., Shukla, A., & Mishra, R. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2682170 · Cited by 20
Ugalde‐Loo, C. E., Adeuyi, O. D., Wang, S., Liang, J., Jenkins, N., Ceballos, S., Santos-Mugica, M., Vidaurrazaga, I., D’Arco, S., Bergna‐Diaz, G., et al. (2017) · IET International Conference on AC and DC Power Transmission (ACDC) · doi:10.1049/cp.2017.0054 · Cited by 20
“These are sent to the modulation strategy block [13, 14].”
BackgroundSelf-citationXiang, M., Hu, J., & Qiu, Y. (2018) · High Voltage · doi:10.1049/hve.2018.5050 · Cited by 20
Peng, C., & Li, R. (2019) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2019.2932329 · Cited by 21
Design Procedure of MMC-HVDC System: Comprehensive Consideration of Internal and External Dynamics
Kang, J., Kang, D.-W., Lee, J.-P., Yoo, D.-W., & Shim, J. W. (2020) · IEEE Access · doi:10.1109/access.2020.3018597 · Cited by 24
Energy Pulsation Reduction in Modular Multilevel Converters Using Optimized Current Trajectories
Braeckle, D., Himmelmann, P., Gröll, L., Hagenmeyer, V., & Hiller, M. (2021) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2021.3065115 · Cited by 20
“Basically, the methods can be divided into offline [44], [46], online [47], [48] and analytical [19], [43], [49], [50] methods.”
MethodXu, J., Wang, J., Yang, Y., Wang, J., & Li, G. (2022) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2022.3183065 · Cited by 19
Zhu, Y., Pou, J., & Konstantinou, G. S. (2022) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2022.3197177 · Cited by 19
“To facilitate the reference determination, the instantaneous values of the output current and modulation signal of the phase leg are utilized to calculate the circulating current reference, with which the capacitor voltage ripple and rms arm current are near the optimal results at lower computational cost [25].”
BackgroundMethodSelf-citationLow-Frequency Voltage Ripple Suppression for MMCs With Split-Capacitor Submodules
Yang, S., Zhuang, F., Wang, Y., Tang, Y. K., & Wang, P. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3327036 · Cited by 21
“It is proposed that injecting specific double and quadruple-frequency circulating currents into the phase leg can suppress the SM capacitor voltage ripple to some extent [10].”
BackgroundSubmodule power losses balancing algorithms for the modular multilevel converter
Picas, R., Pou, J., Zaragoza, J., Watson, A. J., Konstantinou, G. S., Ceballos, S., & Clare, J. (2016) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2016.7793381 · Cited by 23
“Moreover, a circulating current control technique has also been implemented [15].”
MethodSelf-citationTian, Y., Yang, X., & Chen, W. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2958142 · Cited by 19
“A S A popular topology in recent years, the modular multilevel converter (MMC) has been widely used in the high-voltage direct current (HVdc) system because of its good line-side performance and competitive cost advantages [1]–[6].”
BackgroundA Modular Multilevel Converter Station With Multiple MVac Ports
Zhang, J., Sun, Y., Zhou, J., Wang, J., Zang, J., Shi, G., & Li, Y. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3210556 · Cited by 18
“In [10], the combination of injecting a second harmonic and a fourth harmonic in the circulating current is proposed.”
BackgroundMarzoughi, A., Burgos, R. P., & Boroyevich, D. (2018) · IEEE Power Electronics Magazine · doi:10.1109/mpel.2018.2821958 · Cited by 18
“June 2018 z IEEE POwEr ElECtrOnICs MAGAzInE 63 current in the MMC AFE are shown while the optimum second harmonic of the circulating current is injected based on the guidelines in [4].”
BackgroundMethodInfluentialDiscontinuous Space Vector Modulation Schemes for Modular Multilevel Converters
Ronanki, D., & Williamson, S. S. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3019010 · Cited by 19
Fehr, H., & Gensior, A. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2805103 · Cited by 17
“, for 0 Hz operation [16], [18], capacitor voltage ripple reduction [21], [22], or periodic loads [10].”
BackgroundArm-Balancing Control and Experimental Validation of a Grid-Connected MMC With Pulsed DC Load
Jankovic, M., Costabeber, A., Watson, A. J., & Clare, J. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2711516 · Cited by 18
“The arm-balancing controller requires a 50 Hz component in the circulating current [7], [15], [18], which ensures zero average arm powers, enabling capacitor balancing.”
BackgroundMethodInfluentialPérez-Basante, A., Ceballos, S., Konstantinou, G. S., Liserre, M., Pou, J., & de Alegría, I. M. (2016) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2016.7695372 · Cited by 18
“This control, which can be used with different fundamental frequencies, ma and loading conditions, will not require the utilization of different ma at both arms, neither resonant controllers as it happens with PD-PWM controls [7, 8].”
BackgroundMethodSelf-citationHybrid Asymmetric Cascaded Multilevel Inverters Based on Three- and Nine-Level H-Bridges
Bahia, F. A. D. C., Jacobina, C. B., Rocha, N., da Silva, I. R. F. M. P., & Sousa, R. P. R. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2930600 · Cited by 17
“The switches current rating and SM capacitance were defined according to [34] and cell B capacitance (Cb0) was determined in accordance with [35].”
MethodXu, J., Weicheng, D., Li, G., Zhao, C., & Liu, C. (2021) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2021.3118690 · Cited by 17
“Before t =3.0 s, the circulating current elimination method in [7] is applied.”
InfluentialCollection and transmission losses of offshore wind farms for optimization purposes
Papadopoulos, A., Rodrigues, S., Kontos, E., Todorčević, T., Bauer, P., & Pinto, R. T. (2015) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2015.7310601 · Cited by 17
“Therefore, by controlling this second harmonic current to zero, the converter power losses can be minimized [21].”
BackgroundA Hybrid Modular Multilevel Converter with Partial Embedded Energy Storage
Konstantinou, G. S., Pou, J., Pagano, D. J., & Ceballos, S. (2016) · Energies · doi:10.3390/en9121012 · Cited by 17
“The injection of higher order harmonics can also be used to improve the operation of the MMC [24].”
Self-citationNew Circulating Current Suppression Control for MMC Without Arm Current Sensors
Jang, Y.-N., & Park, J.-W. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3410933 · Cited by 18
“For example, note that the conventional CCSC methods with arm current sensors [16], [17] use i ∗ cir as a reference value of i cir , as shown in Fig.”
BackgroundMethodInfluentialA new hybrid modular multilevel converter with increased output voltage levels
Ghat, M. B., Shukla, A., & Mathew, E. C. (2017) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8095988 · Cited by 16
“To control the circulating currents, various techniques have been proposed for conventional MMC in the literature [24]-[29].”
MethodZhao, C., Luan, K., Zhang, H., Li, Z., Wang, P., & Li, Y. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2927690 · Cited by 17
“As introduced in [19], the ripple magnitude of the SM voltage is reduced by injecting an appropriate second-order harmonic”
BackgroundMethodHVDC Grid Post-DC Fault Recovery Enhancement
Abedrabbo, M., Dejene, F. Z., Leterme, W., & Hertem, D. V. (2020) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2020.3002717 · Cited by 17
A novel design of circulating current control target to minimize SM capacitance in MMC
Li, Q., Li, B., He, J., Prieto‐Araujo, E., Spier, D. W., Lyu, H., & Gomis‐Bellmunt, O. (2022) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2022.108432 · Cited by 19
Thang, N. V., Kim, J., Park, J., Lee, J., & Park, B.-G. (2022) · IET Power Electronics · doi:10.1049/pel2.12432 · Cited by 17
Rodríguez, E., Liang, G., Farivar, G. G., Tafti, H. D., Townsend, C. D., Leyva, R., & Pou, J. (2019) · IEEE International Future Energy Electronics Conference (IFEEC) · doi:10.1109/ifeec47410.2019.9015031 · Cited by 18
“which assumes that the MMC is lossless, and that the stored energy in the upper and lower arms of the phase leg are balanced [24].”
BackgroundMethodSelf-citationIsik, S., Alharbi, M., & Bhattacharya, S. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9235884 · Cited by 16
Interoperability of Modular Multilevel and Alternate Arm Converters in Hybrid HVDC Systems
Wickramasinghe, H. R., Sun, P., & Konstantinou, G. S. (2021) · Energies · doi:10.3390/en14051363 · Cited by 16
“The FCCC technique actively controls icirc based on the proportional resonant controllers.”
BackgroundMethodSelf-citationXie, X., Li, H., Tan, H., Wu, Y., Yang, T., Zheng, J., & Yang, W. (2021) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2021.107264 · Cited by 15
Rodríguez, E., Leyva, R., Townsend, C. D., Farivar, G. G., Tafti, H. D., & Pou, J. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3085880 · Cited by 17
“According to the experimental results, where the control action provided by the “Cluster Balancing” sub-block controller, when the cluster voltages are balanced, is zero, a proportional controller satisfies the control objective [27].”
ResultSelf-citationLi, X., Song, Q., Liu, W., Li, Q., Rao, H., & Xu, S. (2014) · Electric Power Systems Research · doi:10.1016/j.epsr.2014.11.013 · Cited by 14
Asymmetric overlap and hysteresis current control of zero-current switched alternate arm converter
Wickramasinghe, H. R., Konstantinou, G. S., Pou, J., & Agelidis, V. G. (2016) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2016.7793990 · Cited by 14
“the upper and lower arm currents (iu and il) during the overlap period can be given in terms of the overlap circulating current icirc, based on the MMC equivalent circuit [15] as:”
MethodSelf-citationReduction in Submodule Capacitance in FB- and HYB-MMCs With Variable DC Voltages
Li, Z., Gou, L., Song, Q., Tang, B., Zhao, B., Han, L., & Wang, K. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3199914 · Cited by 16
“In the existing studies, circulating current control is used to suppress the arm energy fluctuations [11], [12], [13].”
BackgroundTang, Y., Chen, M., & Ran, L. (2016) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2016.7468058 · Cited by 16
“This topological innovation opens a new degree of freedom for reducing the capacitor, as a result, other capacitor reduction methods, which reduce the capacitor size by using other mechanisms, such as those proposed in [2-13] can be combined with the SSC-SM based MMC to enable better capacitor reduction performance.”
MethodA Circulating Current Suppression Strategy for MMC Based on the 2N+1 PWM Approach
Zhang, G., Song, J., Li, C., & Gu, X. Y. (2023) · World Electric Vehicle Journal · doi:10.3390/wevj14040106 · Cited by 15
“…the reference value of the circulating current can be set to the value of the DC component. i ∗ cirA_suppressing = A A cos ϕ (15 Meanwhile, to ensure the power balance between the DC side and the AC side of the MMC, the DC component of the instantaneous power of the arm should be kept at zero [25].”
BackgroundGong, Z., Tuo, P., Zheng, C., & Wu, X. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3406923 · Cited by 17
“Traditional linear cascaded control strategies, especially proportional integral (PI) or proportional resonant regulators, are widely used in MMC rectifiers to control ac-side current, submodule capacitance voltage, and circulating current, simultaneously [7], [8], [9].”
BackgroundZhao, F., Xiao, G., Song, Z., & Peng, C. (2016) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc.2016.7512379 · Cited by 14
Circulating Current Suppression in DAB Assisted Low-Voltage Variable Frequency MMC
Aguilar, R., Tarisciotti, L., & Pereda, J. E. (2022) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2022.3183959 · Cited by 14
“This current naturally helps balancing the capacitors, or it can even be injected in order to reduce more the ripple [14], but also increases the current stress of the devices of the MMC.”
BackgroundLi, K., Li, C., Lee, F. C., Mu, M., & Zhao, Z. (2015) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2015.7385061 · Cited by 13
Darus, R., Konstantinou, G. S., Pou, J., Ceballos, S., & Agelidis, V. G. (2014) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2014.6953907 · Cited by 14
“A circulating current controller which uses instantaneous measurements from the MMC is used in the remaining of this paper, aiming to eliminate higher order harmonics in the arm currents as described in [25] III.”
MethodSelf-citationLi, M., Dong, N., Chang, X., Yang, H., & Zhao, R. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3268847 · Cited by 14
“However, this increase cannot be greater than that of the methods in [9] and [21] because the upper limit of the injected circulating current amplitude in this article is the same as that in [9] and [21] to avoid excessive current stress.”
BackgroundMethodInfluentialA Highly Resilient Fault Tolerant Topology of Single Phase Multilevel Inverter
Gautam, S. P., Jalhotra, M., Sahu, L. K., Chander, A. H., & Bhajana, V. V. S. K. (2023) · IEEE Access · doi:10.1109/access.2023.3337386 · Cited by 14
“Additionally, a robust fault-tolerant design for MMCs should effectively manage challenges related to circulating current, energy distribution equilibrium, and the balancing of capacitor voltages, as highlighted in [15], [16], and [17].”
BackgroundAlharbi, M., Isik, S., & Bhattacharya, S. (2019) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8912773 · Cited by 13
“Hence, control of circulating current is prominent because inappropriate control methods for the circulating current can adversely affect component ratings [11].”
BackgroundLiu, J., & Dong, D. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3166520 · Cited by 13
“For example, multiple techniques are proposed to inject appropriate harmonics to the so called “circulating current” to reduce the dc-link capacitor voltage ripple [7], [8], such as the second and fourth harmonic current components.”
MethodAn interconnected observer for modular multilevel converter
Trabelsi, M., Ghanes, M., Ellabban, O., Abu‐Rub, H., & Ben‐Brahim, L. (2016) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2016.7854853 · Cited by 14
A novel T-type half-bridge cell for modular multilevel converter with DC fault blocking capability
Zhao, F., Xiao, G., Yang, D., Liu, M., Han, X., & Liu, B. (2016) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2016.7854749 · Cited by 16
Condition Monitoring Method for Submodule Capacitor in Modular Multilevel Converter
Wang, H., Wang, H., Zhang, Y., Wang, Z., Pei, X., & Kang, Y. (2019) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2019.8721821 · Cited by 13
Younis, T., Mattavelli, P., Toigo, I., & Corradin, M. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3087670 · Cited by 12
Offset PWM in modular multilevel converters for stored arm energy reduction
Konstantinou, G. S., Wickramasinghe, H. R., Ceballos, S., & Pou, J. (2016) · IEEE Annual Southern Power Electronics Conference · doi:10.1109/spec.2016.7846100 · Cited by 11
“The control of the circulating current [18] alters the reference signals (and corresponding duty ratios) by adding and subtracting an appropriate value (vdiff ) in order to control the circulating current to its dc reference.”
BackgroundSelf-citationHybrid Model Predictive Control for Modified Modular Multilevel Switch-Mode Power Amplifier
Guo, P., Xu, Q., Yue, Y., He, Z., Xiao, M., Ouyang, H., & Guerrero, J. M. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3031271 · Cited by 10
Konstantinou, G. S., Ceballos, S., Gabiola, I., Pou, J., Karanayil, B., & Agelidis, V. G. (2017) · Asian Conference on Energy, Power and Transportation Electrification (ACEPT) · doi:10.1109/acept.2017.8168595 · Cited by 11
“10 shows the currents through all six of the arms of the converter when operating in inverter mode with the arm currents controlled based on the instantaneous current control method of [27].”
MethodSelf-citationGeneralized SVPWM-based capacitor voltage balancing for modular multilevel converters
Ronanki, D., & Williamson, S. S. (2018) · IEEE International Conference on Compatibility, Power Electronics and Power Engineering · doi:10.1109/cpe.2018.8372504 · Cited by 11
“active circulating current suppression controllers that use PI controllers in synchronous dq frame [23] or proportionalresonant (PR) controllers stationary αβ frame [14] or model predictive methods [16].”
MethodPassivity‐based control of MMC‐based active power filter under non‐ideal conditions
Wang, Y., Cheng, Q., & Cheng, Y. (2019) · International Transactions on Electrical Energy Systems · doi:10.1002/2050-7038.12178 · Cited by 11
Gontijo, G., Wang, S., Kerekes, T., & Teodorescu, R. (2020) · Energies · doi:10.3390/en13143664 · Cited by 12
“Even though many papers have proposed methods to keep the MMC submodule-capacitor voltage ripples within acceptable limits [11,12], at low frequencies, this problem can be much more serious [13,14].”
BackgroundYounis, T., Mattavelli, P., Magnone, P., Toigo, I., & Corradin, M. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3093486 · Cited by 10
The virtual infinite capacitor-based active submodule for MMC
Lin, J., & Weiss, G. H. (2016) · IEEE Convention of Electrical and Electronics Engineers in Israel · doi:10.1109/icsee.2016.7806038 · Cited by 10
“harmonic, better results can be achieved, see [4], [5], and especially [6].”
BackgroundA novel model predictive control strategy of modular multilevel converters using voltage prediction
Lin, H., & Wang, Z. (2017) · Electric Power Systems Research · doi:10.1016/j.epsr.2017.09.025 · Cited by 10
Comparison of Current Control Strategies in Modular Multilevel Converter
Wei, J., Acharya, A. B., Norum, L. E., & Bauer, P. (2018) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec.2018.8507612 · Cited by 10
“Based on the idea of controlling the AC and DC component of circulating current separately, more methods are proposed [31], [32].”
MethodWang, S., Teodorescu, R., & Chaudhary, S. K. (2018) · IEEE International Power Electronics and Application Conference and Exposition (PEAC) · doi:10.1109/peac.2018.8590514 · Cited by 10
“In [3], the equivalent capacitance of arm SMs capacitors is defined by two new methods due to the characteristics of MMC SMs capacitors.”
MethodUPFC fault ride-through strategy based on virtual impedance and current limiting reactor
Li, H., Zheng, T., Huang, S., & Wang, Y. (2020) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2020.106491 · Cited by 10
Zhou, S., Wang, J., Li, B., & Xu, D. (2018) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.23919/icems.2018.8549315 · Cited by 10
“THIRD-HARMONIC INJECTION Third-harmonic common-mode voltage injection is widely used in converters to improve the voltage utilization ratio [10], with the expression of the output voltage modified as 1 = cos cos 3 6 o OM OM u U t U t .”
MethodChakraborty, R., Samantaray, J., Chakrabarty, S., & Dey, A. (2020) · IEEE International Conference on Power Electronics, Smart Grid, and Renewable Energy (PESGRE) · doi:10.1109/pesgre45664.2020.9070388 · Cited by 11
“Circulating Current Controller and Capacitor voltage balancing In this paper, the circulating current reference generated in [2] is used.”
BackgroundMethodInfluentialReddy, G. A., Rao, N. P., & Shukla, A. (2024) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2024.3427050 · Cited by 9
“In [15], two control methods are discussed to reduce the SMs capacitor size.”
BackgroundMethodFuchs, S., & Biela, J. (2023) · IEEE Access · doi:10.1109/access.2023.3250108 · Cited by 10
An Enhanced AC Fault Ride through Scheme for Offshore Wind-Based MMC-HVDC System
Soomro, J. B., Kumar, D. S., Chachar, F. A., Isik, S., & Alharbi, M. (2023) · Sustainability · doi:10.3390/su15118922 · Cited by 11
Virtual Arm Impedance Emulation and Stability Improvement in Modular Multilevel Converters
Zhu, Y., Jiang, S., Pou, J., & Konstantinou, G. S. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3351890 · Cited by 9
“Circulatingcurrentinjectionmethodsbasedoninstantaneous methodsareproposedin[23]toreducethesubmodulecapacitor voltageripples.”
MethodInfluentialSelf-citationGensior, A., & Fehr, H. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3008317 · Cited by 10
Analysis and Optimization of Energy Variations in MMCs With Variable DC Voltages
Li, Z., Song, Q., Xu, S., Zhao, B., Yu, Z., & Zeng, R. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3186875 · Cited by 11
Tian, X., Jiang, Q., Wei, Y., Zhang, J., & Wei, Y. (2015) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.1109/icpe.2015.7167896 · Cited by 9
“Inner current control loop design The MMC arm current control strategies in existing literatures[12, 13] usually take upper arm current as the feedback for current close loop to calculate the reference output voltage of upper arm.”
BackgroundHigh-performance Integrated Modulation Scheme for Modular Multilevel Converters
Ronanki, D., & Williamson, S. S. (2018) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec.2018.8450211 · Cited by 9
“The different control schemes include the injection of second harmonic zero-sequence voltage, double-frequency harmonic components in CC [11], a combination of high-frequency CMV and, CC [10], [12] and model predictive control methods [13].”
Method
Metadata
- Authors
- Pou, J., Ceballos, S., Konstantinou, G., Agelidis, V. G., Picas, R., & Zaragoza, J.
- Affiliations
- UNSW Sydney (AU)
- Tecnalia (ES)
- Universitat Politècnica de Catalunya (ES)
- ORCID
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-02
- Volume
- 62
- Issue
- 2
- Pages
- 777-788
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2030899995
- Cited by
- 406
- References
- 31
- Citations by year
- 2026: 9 · 2025: 20 · 2024: 29 · 2023: 34 · 2022: 31 · 2021: 45 · 2020: 48 · 2019: 39 · 2018: 42 · 2017: 43 · 2016: 31 · 2015: 30
- FWCI
- 19.29
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Locations
- IEEE Transactions on Industrial Electronics (publishedVersion)
- RECERCAT (Consorci de Serveis Universitaris de Catalunya) (acceptedVersion, other-oa)
- UPCommons institutional repository (Universitat Politècnica de Catalunya) (acceptedVersion, other-oa)
- UNSWorks (UNSW Sydney) (submittedVersion, cc-by-nc-nd)
- LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) (submittedVersion, public-domain)
- TECNALIA Publications (Fundación TECNALIA Research & Innovation) (submittedVersion, public-domain)
- UNSWorks (University of New South Wales, Sydney, Australia) (submittedVersion, cc-by-nc-nd)
- Funders
- Ministerio de Economía y Competitividad of Spain (ENE2012-36871-C02-00)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › HVDC Systems and Fault Protection
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Keywords
- modular multilevel converter, modulated signals, capacitor voltage ripple, feedback control, capacitor voltage balancing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.