Circulating Current Injection Methods Based on Instantaneous Information for the Modular Multilevel Converter
Open accessThe DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Abstract
This paper studies different circulating current references for the modular multilevel converter. The circulating current references are obtained from the instantaneous values of the output current and modulation signal of the phase leg. Therefore, the determination of the amplitude and phase of the output current is not needed, which is a significant improvement compared to other methods such as those based on injecting specific harmonics in the circulating currents. Among the different methods studied in this paper, a new method is introduced, which is able to reduce the capacitor voltage ripples compared to the other methods. A closed-loop control is also proposed which is able to track the circulating current references. With the discussed methods, the average values of the capacitor voltages are maintained at their reference while the voltage ripples are kept low. Experimental results are presented to demonstrate the effectiveness of the proposed and discussed methods.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Recent Advances and Industrial Applications of Multilevel Converters
Kouro, S., Malinowski, M., Gopakumar, K., Pou, J., Franquelo, L. G., Wu, B., Rodriguez, J., Pérez, M. A., & Leon, J. I. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049719 · Cited by 3,872 · cited 1×
“Among various multilevel converter topologies [1], the modular multilevel converter (MMC) [2]–[6] offers several salient features”
BackgroundSelf-citationAn innovative modular multilevel converter topology suitable for a wide power range
Lesnicar, A., & Marquardt, R. (2004) · 2003 IEEE Bologna Power Tech Conference Proceedings, · doi:10.1109/ptc.2003.1304403 · Cited by 2,908
Operation, Control, and Applications of the Modular Multilevel Converter: A Review
Debnath, S., Qin, J., Bahrani, B., Saeedifard, M., & Barbosa, P. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2309937 · Cited by 2,210 · cited 1×
“Among various multilevel converter topologies [1], the modular multilevel converter (MMC) [2]–[6] offers several salient features”
BackgroundControl and Experiment of Pulsewidth-Modulated Modular Multilevel Converters
Hagiwara, M., & Akagi, H. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2014236 · Cited by 1,565
Tu, Q., Xu, Z., & Xu, L. (2011) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2011.2115258 · Cited by 1,387 · cited 2×
“Three references are obtained for the circulating current, and the first one injects only a dc component, which is based on [21] and [22].”
BackgroundCircuit Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters
Perez, M. A., Bernet, S., Rodriguez, J., Kouro, S., & Lizana, R. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2310127 · Cited by 1,346
Dynamic Performance of a Modular Multilevel Back-to-Back HVDC System
Saeedifard, M., & Iravani, R. (2010) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2010.2050787 · Cited by 1,188 · cited 2×
“2336608 which make it a potential candidate for various applications, including high-voltage-direct-current transmission systems [7]–[9], flexible-alternating-current-transmission-system controllers [10], photovoltaic generation [11], wind turbine applications [12], and motor drives [13]–[15].”
BackgroundClassification, Terminology, and Application of the Modular Multilevel Cascade Converter (MMCC)
Akagi, H. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143431 · Cited by 1,172
Dynamic Analysis of Modular Multilevel Converters
Harnefors, L., Antonopoulos, A., Norrga, S., Angquist, L., & Nee, H.-P. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2194974 · Cited by 623
A new modular voltage source inverter topology
Marquardt, R. (2003) · Medical Entomology and Zoology · Cited by 503
Cited by
Items 201–300 of 404
Extended ZCS Region of AAC-HVDC Systems Through On-Load Tap Changer Coordination
Wickramasinghe, H. R., Konstantinou, G. S., & Pou, J. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2996153 · Cited by 11
“The overlap operation mimics the MMC operation [22] and the arm currents during the overlap period can be expressed as”
MethodSelf-citationCirculating Current Generating Mechanism and Suppression Control of HMMC
Huang, W., Liu, F., Liu, W., Zhuang, Y., Huang, Y., & Zha, X. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3178098 · Cited by 8
“The method in [10] collects instantaneous information to”
MethodA simplified dual-stage model predictive controller for modular multilevel converters
Chakraborty, R., Gajare, P. M., Chaki, R., & Dey, A. (2023) · Electric Power Systems Research · doi:10.1016/j.epsr.2023.109525 · Cited by 8
Double-Carrier Phase-Disposition Pulse Width Modulation Method for Modular Multilevel Converters
Zhou, F., Luo, A., Li, Y., Xu, Q., He, Z., & Guerrero, J. M. (2017) · Energies · doi:10.3390/en10040581 · Cited by 9
An improved indirect model predictive control approach for modular multilevel converter
Dekka, A., Wu, B., & Zargari, N. R. (2016) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2016.7793081 · Cited by 9
Virtual‐multilevel model predictive control with error feedback for modular multilevel converters
Lin, H., & Wang, Z. (2017) · IET Generation Transmission & Distribution · doi:10.1049/iet-gtd.2016.1418 · Cited by 8
Fehr, H., & Gensior, A. (2019) · European Conference on Power Electronics and Applications · doi:10.23919/epe.2019.8914767 · Cited by 10
“in [22,25], and leads to a 2nd and 4th harmonic in a stationary operating regime in case of a nonzero 3rd harmonic in the common-mode voltage vy0.”
BackgroundMethodLiang, G., Farivar, G. G., Yadav, G. N. B., Rodríguez, E., & Pou, J. (2021) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon48115.2021.9589060 · Cited by 10
“This section briefly reviews the operating principle and modeling of the MMC [13].”
BackgroundSelf-citationXie, X., Li, H., Tan, H., Yao, R., & Zheng, J. (2023) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2023.109127 · Cited by 9
Eigenvalue Optimization of the Energy-Balancing Feedback for Modular Multilevel Converters
Fehr, H., & Gensior, A. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2900837 · Cited by 10
“This includes a second harmonic circulating current for reduced capacitor voltage ripple as in [61], [62], or”
BackgroundActive Power Decoupling for Full-Bridge Submodules of a Modular Multilevel Converter
Jia, G., Shi, B., Li, M., Chen, M., Niu, F., & Tang, Y. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3401099 · Cited by 7
“Recently, research on suppressing the capacitor voltage ripple is proposed in [12], [13], and [24].”
BackgroundA fast steady-state loss model of a modular multilevel converter for optimization purposes
Papadopoulos, A., Rodrigues, S., Kontos, E., Todorčević, T., & Bauer, P. (2015) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.1109/icpe.2015.7168048 · Cited by 7
“Therefore, by controlling this second harmonic current to zero, the converter power losses can be minimized [24].”
BackgroundAn Optimization Method for Minimizing the Submodule Capacitance of Modular Multilevel Converter
Han, X., Chen, Y., Li, R., & Bing, P. A. N. (2018) · IEEE International Power Electronics and Application Conference and Exposition (PEAC) · doi:10.1109/peac.2018.8590573 · Cited by 7
“A method of injecting circulating current by real-time computation is proposed in [6].”
MethodChattopadhyay, S. K., & Chakraborty, C. (2019) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2018.2890575 · Cited by 9
“Several modulation strategies for MMC to reduce capacitor requirement are reported in [14]–[16].”
Wu, T., Huang, C., Chou, T.-C., & Sun, K. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2952830 · Cited by 7
Discontinuous PWM Scheme for Switching Losses Reduction in Modular Multilevel Converters
Jeong, M.-G., Kim, S., Lee, J.-S., & Lee, K. (2017) · Journal of Power Electronics · doi:10.6113/jpe.2017.17.6.1490 · Cited by 7
State-feedback control of grid and circulating current in modular multilevel converters
Bratcu, A. I., & Teodorescu, R. (2020) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2020.12.1279 · Cited by 7
Circulating Current Injection Method for the Modular Multilevel Converter
Jia, G., Li, M., Su, X., Tang, S. Y., Liu, X., & Jiang, W. (2021) · IEEE International Power Electronics and Application Symposium (PEAS) · doi:10.1109/peas53589.2021.9628629 · Cited by 8
Shahparasti, M., Rajaei, A., Tarrasó, A., & Luna, Á. (2022) · Energy · doi:10.1016/j.energy.2022.123639 · Cited by 9
Comparison of bipolar sub-modules for the alternate arm converter
Wickramasinghe, H. R., Konstantinou, G. S., Pou, J., Picas, R., Ceballos, S., & Agelidis, V. G. (2016) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2016.7793031 · Cited by 8
“of circulating current control techniques based on doublefrequency synchronous reference frame [10], and proportionalresonant controllers [11], [12] are reported in the existing literature.”
BackgroundSelf-citationBakhshizadeh, M. K., Ma, K., Loh, P. C., & Blaabjerg, F. (2015) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2015.7310609 · Cited by 7
“In [13] and [14] voltage ripples on capacitors of SMs are minimized by proper controlling the circulating current.”
BackgroundLi, J., Wickramasinghe, H. R., Konstantinou, G. S., Pou, J., & Jin, X. (2017) · Asian Conference on Energy, Power and Transportation Electrification (ACEPT) · doi:10.1109/acept.2017.8168596 · Cited by 7
“The SM capacitor energy control method in this paper follows the methods reported in [19], [31], representing the commonly used AAC circulating current control method of [19].”
MethodSelf-citationLi, A., Lin, L., Chen, X., & Yang, S. (2018) · IEEE International Power Electronics and Application Conference and Exposition (PEAC) · doi:10.1109/peac.2018.8590413 · Cited by 7
“In [10], inclusion of the zero sequence voltage in coordination with circulating current injection to the arm reference voltage wave is considered.”
BackgroundAveraged and Small-Signal Models for Modular Multilevel Converter with Square-wave Modulation
Martin, S., Agarwal, R., Shi, Y., & Li, H. (2019) · IEEE Electric Ship Technologies Symposium (ESTS) · doi:10.1109/ests.2019.8847942 · Cited by 7
“This analysis is valid for any cell count and any combination of switching frequency and AC frequency as long as the modulation requirement, shown in (2), is met, and as long as Nfs/f is a whole number.”
BackgroundImproved sliding‐mode control for MMC in DC power system
Li, B., Xie, Y., Wen, W., & Guan, T. (2020) · IET Renewable Power Generation · doi:10.1049/iet-rpg.2020.0493 · Cited by 7
Steady‐state power operation region of a modular multilevel converter connecting to an AC grid
Wang, J., Liu, C., Annakkage, U. D., Li, X., & Su, C. (2021) · High Voltage · doi:10.1049/hve2.12100 · Cited by 7
DC Voltage Control and OLTC Control Strategy for MMC-Based HVDC System Under SM Failure
Richa, A., Beig, A. R., & Jayashree, R. (2021) · IEEE Access · doi:10.1109/access.2021.3102377 · Cited by 8
A side‐effect‐free method of reducing capacitance requirement for modular multilevel converters
Liu, Z., Li, K., Wang, J., & Li, L. (2021) · High Voltage · doi:10.1049/hve2.12168 · Cited by 9
Zhang, H., Wickramasinghe, H. R., Jing, L., Li, J., Pou, J., & Konstantinou, G. S. (2019) · Electric Power Systems Research · doi:10.1016/j.epsr.2019.01.041 · Cited by 9
Self-citationChaki, R., & Dey, A. (2025) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2025.3544226 · Cited by 6
“The circulating current is controlled by injecting a second order harmonic component in the circulating current reference [26].”
Wang, Y., Shi, X., Chen, M., Lyu, J., Li, X., Zhang, Z., & Cai, X. (2023) · Electronics · doi:10.3390/electronics12071695 · Cited by 6
“…in-depth studies on the links between the CCIC technique and the performance improvement of the MMC, such as capacitor voltage ripple suppression [24,25], thermal management optimization [26,27], and operation region extension that has been presented in [19], etc. Compared with the CCEC, the…”
Niu, X., Qiu, R., Liu, S., & Chow, X. (2024) · Electronics · doi:10.3390/electronics13173379 · Cited by 6
Online Harmonic Injection for MMC Over a Wide Frequency Range in DC Offshore Wind Farms
Yang, X., Wang, Z., Wu, Z., Meng, Z., Yong, Z., Liu, C., Wang, Y., & Fu, Y. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3456848 · Cited by 6
“A previous study [28] proposes a closed-loop controller to track the circulating current levels in real time.”
Liu, S., Niu, D., Zhang, L., Lin, J., Fang, J., & Li, Z. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3466136 · Cited by 9
“In detail, the existing methods suppressed capacitor voltage ripple by injecting circulating current [17], [18], [19], [20] and zero-sequence voltage [21], [22] in MMC.”
Current Observation and Voltage Prediction Scheme for a Reduced Sensor Based Medium Voltage MMC
Chaki, R., & Dey, A. (2024) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2024.3471998 · Cited by 7
“A reference for control of circulating current is given by the controller presented in [3], [4].”
InfluentialYounis, T., Mattavelli, P., Magnone, P., Toigo, I., & Corradin, M. (2019) · IEEE Conference on Power Electronics and Renewable Energy (CPERE) · doi:10.1109/cpere45374.2019.8980169 · Cited by 6
“Injecting low order harmonics in the circulating current is proposed in [10], [11], [13].”
BackgroundLi, Q., Li, B., Xie, Z., & Zhou, B. (2023) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2023.109474 · Cited by 7
A modular multilevel converter with active power filter (APF-MMC) under low-frequency operation
Jia, G., Li, M., Chen, L., Shi, B., Niu, F., & Tang, Y. (2024) · Journal of Power Electronics · doi:10.1007/s43236-023-00764-3 · Cited by 6
“In terms of adding control variable degrees of freedom, in [9] and [10], a second-order circuiting current was infused to arms of each phase to suppress the voltage ripple in the SM. Methods for injecting second-order and fourth-order circuiting currents into arm currents were proposed in [11] and…”
Gebreel, A. A. G. M., & Xu, L. (2016) · IEEE Power and Energy Technology Systems Journal · doi:10.1109/jpets.2016.2521584 · Cited by 6
A fault ride through strategy of unified power flow controller and its coordination with protection
Li, H., Zheng, T., Huang, S., Tang, Z. C., & Cao, H. (2020) · Electric Power Systems Research · doi:10.1016/j.epsr.2020.106323 · Cited by 6
Lopez, A. M., Quevedo, D. E., Aguilera, R., Geyer, T., & Oikonomou, N. (2015) · 2015 17th European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe) · doi:10.1109/epe.2015.7309192 · Cited by 5
“Inter alia, the analysis shows the importance of the even order harmonics of the circulating current in the reactive power transfer within the converter.”
BackgroundFault-tolerant operation scheme for modular multilevel converter under arm energy imbalance
Kang, J., Kim, H., Hur, K., Jung, H.-J., & Lee, D.-S. (2017) · IEEE International Conference on Power Electronics and Drive Systems (PEDS) · doi:10.1109/peds.2017.8289247 · Cited by 6
Noushak, M., Hadizadeh, A., Iman‐Eini, H., Farhangi, S., & Frey, D. (2017) · Power Electronics, Drive Systems, and Technologies Conference (PEDSTC) · doi:10.1109/pedstc.2017.7910345 · Cited by 5
Tanaka, T., Wang, H., & Blaabjerg, F. (2018) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec.2018.8507527 · Cited by 5
“Several capacitor voltage oscillation reduction methods for an MMCC with Double Star Chopper Cells (DSCC) have been presented [4-10].”
MethodFuchs, S., Jeong, M., & Biela, J. (2020) · European Conference on Power Electronics and Applications · doi:10.23919/epe20ecceeurope43536.2020.9215757 · Cited by 5
“Furthermore, the CM voltage injection proposed in the literature references does always lead to an increase in the required capacitance value (compare [5] with and without CM as well as [7] Methods B and C in Fig.”
BackgroundMethodLiang, G., Tafti, H. D., Farivar, G. G., Pou, J., Townsend, C. D., & Konstantinou, G. S. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9236261 · Cited by 5
“In the simulation and experiments of this paper, a circulating current controller described in [12] is implemented.”
MethodSelf-citationFault-tolerant strategies in MMC-based high power magnet supply for particle accelerator
Colmenero, M., Vidal-Albalate, R., Blánquez, F. R., & Blasco-Giménez, R. (2023) · Mathematics and Computers in Simulation · doi:10.1016/j.matcom.2023.07.014 · Cited by 5
“Finally, horizontal and vertical balancing of leg and arm energies is achieved by controlling the DC and AC circulating currents flowing through the arms [17].”
BackgroundGhat, M. B., Shukla, A., & Mishra, R. (2016) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2016.7468192 · Cited by 6
Circulating current suppression with improved DC‐link power quality for modular multilevel converter
Li, K., Liao, Y., Lin, H., Liu, R., & Zhang, J. (2017) · IET Generation Transmission & Distribution · doi:10.1049/iet-gtd.2017.1109 · Cited by 5
Hahn, F., Teodorescu, R., Buticchi, G., Liserre, M., & Lascu, C. (2018) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8558220 · Cited by 5
“The MMC in double-star configuration enables a very fast and flexible control even if the control of the capacitor energies is sophisticated [5].”
BackgroundTian, R., Wu, X., Jing, L., Li, J., Zhao, H., & Yan, H. (2023) · IET Power Electronics · doi:10.1049/pel2.12552 · Cited by 5
Energy Balancing of the Alternate Arm Converter Under Parameter Variations
Wickramasinghe, H. R., Konstantinou, G. S., & Pou, J. (2018) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2018.8433658 · Cited by 5
“Main types of modular converter topologies reported in the literature are: i) half-bridge submodule (HB-SM) based modular multilevel converter (MMC) [7], ii) full-bridge submodule (FB-SM)-based MMC [8], iii) hybrid MMCs based on multiple SM configurations [9], and iv) the alternate arm converter (AAC) [10].”
Self-citationHarmonic Balance-Based Space-Vector Approach for MMC Interleg Equalization
Bova, B., Brando, G., Cervone, A., Dannier, A., & Zigon, C. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2938142 · Cited by 5
“In particular, some authors propose to suppress the recirculating currents to enhance the system overall efficiency [25]–[28], while others rely on their combined effect with a proper injection into the leg reference voltages [21], [23], [29], [30].”
BackgroundEnergy-Balancing of a Modular Multilevel Converter Using an Online Trajectory Planning Algorithm
Gui, Q., Gnarig, J. L., Fehr, H., & Gensior, A. (2020) · European Conference on Power Electronics and Applications · doi:10.23919/epe20ecceeurope43536.2020.9215848 · Cited by 5
Capacitor voltage ripple reduction in MMC-HVDC system using flat bottom current method
Hafeez, K., Khan, S., den Bossche, A. V., & Hasan, Q. U. (2021) · Electrical Engineering · doi:10.1007/s00202-020-01169-2 · Cited by 5
Wang, K., Song, Q., & Xu, S. (2022) · Energies · doi:10.3390/en15031225 · Cited by 6
Zarei, M. E., Gupta, M., Ramírez, D., & Martinez‐Rodrigo, F. (2019) · IET Renewable Power Generation · doi:10.1049/iet-rpg.2019.0888 · Cited by 5
Sharifi, S., Bieber, L. M., Wang, L., & Jatskevich, J. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3418431 · Cited by 4
“Balance of the stacks is achieved when the net energy deviation of each stack over one electrical cycle equals zero [29].”
A control method for inductor current balancing in current source modular multilevel converter
Bhesaniya, M. M., Shukla, A., & Demetriades, G. D. (2015) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2015.7392547 · Cited by 4
“In steady state, the dc power 0 P should not appear in the arms [15]; otherwise, the energy stored in the inductor will increase or decrease continuously.”
BackgroundDesign, Analysis, and Experimental Verification of Arm Link Enhanced Modular Multilevel Converter
Aguilar, R., Tarisciotti, L., & Pereda, J. E. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3387653 · Cited by 5
“It is important to highlight that the circulating current generates a natural balancing of the capacitors and can be injected in order to reduce the voltage ripple [62] or suppressed to reduce the current stress on the devices [63].”
BackgroundA reduced switching space vector modulation for medium voltage grid connected MMC
Chaki, R., Tambe, S., & Dey, A. (2024) · Electric Power Systems Research · doi:10.1016/j.epsr.2024.111322 · Cited by 5
Konstantinou, G. S., Pou, J., Darus, R., Ceballos, S., & Agelidis, V. G. (2015) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2015.7125549 · Cited by 5
“The circulating current control is internal to each phase-leg of the MMC [7] and is achieved through separate control structures.”
BackgroundSelf-citationDiscontinuous modulation of modular multilevel converters without the need for extra submodules
Picas, R., Ceballos, S., Pou, J., Zaragoza, J., Konstantinou, G. S., Agelidis, V. G., & Balcells, J. (2015) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2015.7392484 · Cited by 4
“Combined with a closed-loop strategy for the control of the circulating current [10], the discontinuous modulation can achieve a significant reduction in the capacitor voltage ripples and switching power losses.”
BackgroundMethodSelf-citationFonseca, J. M. L., Reddy, S. R. P., Rajashekara, K., & Raj, K. Y. (2021) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec42165.2021.9487407 · Cited by 4
A Capacitance Reduction Technology of FBSMMMC based on Second-harmonic Circulating Current Injection
Li, H., Wang, Q., Xiao, L., Wu, Q., & Yang, Y. (2021) · IEEE Sustainable Power and Energy Conference (iSPEC) · doi:10.1109/ispec53008.2021.9735937 · Cited by 4
Younis, T., Mattavelli, P., Toigo, I., & Corradin, M. (2023) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2023.3274103 · Cited by 5
“The high SM capacitance requirement is the most important [7], [8], [9], [10], [11], [12], [13], [14], [15], [16].”
BackgroundMethodArm Current Estimation and Sensor Reduction Operation of MMC
Chaki, R., & Dey, A. (2023) · IEEE International Conference on Power Electronics, Smart Grid, and Renewable Energy (PESGRE) · doi:10.1109/pesgre58662.2023.10405172 · Cited by 4
“The measurement of arm currents is required for controlling the internal parameters of MMC [5].”
A medium-voltage motor drive based on diode-clamped modular multilevel converters
Zheng, T., Gao, C., Liao, X., Liu, X., Sun, B., & Lv, J. (2017) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2017.8056056 · Cited by 7
“The tuning and designing issues of the controller is a drawback of this method [8], [9].”
MethodDekka, A., Wu, B., Yaramasu, V., Beig, A. R., & Zargari, N. R. (2018) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2018.8591523 · Cited by 4
“In [17], the fourth-order circulating current component has been injected into the MMC along with the second harmonic circulating current component to minimize the voltage ripple.”
MethodYounis, T., Mattavelli, P., Magnone, P., Toigo, I., & Corradin, M. (2019) · European Conference on Power Electronics and Applications · doi:10.23919/epe.2019.8914914 · Cited by 4
“Circulating current injection with optimized magnitude and phase is proposed in [7, 8, 11].”
BackgroundAguilar, R., Tarisciotti, L., & Pereda, J. E. (2021) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce47101.2021.9595784 · Cited by 4
Utilising redundant voltage levels for circulating current control in modular multilevel converters
Konstantinou, G. S., Pou, J., Ceballos, S., Picas, R., Zaragoza, J., & Agelidis, V. G. (2015) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2015.7392430 · Cited by 4
“The benefits from controlling the circulating current have been identified from the very early stages of research into the MMC [8], [9] and multiple controllers with different control objectives have been proposed [8]–[21].”
BackgroundResultSelf-citationJankovic, M., Costabeber, A., Watson, A. J., Clare, J., & Aguglia, D. (2018) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2018.2837619 · Cited by 4
“high PM, the proposed balancing scheme produces a circulating current almost aligned with the AC voltage vector, showing the affinity between this method and the methods introduced in [15] and [16].”
BackgroundMethodDual SVPWM strategy for digital implementation of any n–level MMC structure
Chakraborty, R., & Dey, A. (2018) · IEEE International Conference on Power Electronics, Drives and Energy Systems · doi:10.1109/pedes.2018.8707931 · Cited by 3
“It should be noted that the circulating current and the output current are independent to each other and hence they can be analyzed using two different independent circuits [17] [18] [19].”
BackgroundMethodThermal Characterization of the Alternate Arm Converter for HVDC Applications
Wickramasinghe, H. R., Wang, W., Ma, K., & Konstantinou, G. S. (2019) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2019.8755183 · Cited by 3
“The typical half-bridge submodules (HB-SMs) based modular multilevel converters (MMCs) suffer from lack of dc-fault tolerant capability despite their unique and flexible features.”
BackgroundSelf-citationAbdayem, A., Sawma, J., Khatounian, F., Monmasson, É., & Ghosn, R. (2022) · IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg54999.2022.9923321 · Cited by 4
“The low-frequency harmonics of the circulating current increase the losses, thus, the researchers focused first on developing strategies which are able to control the DC component while eliminating the low-frequency harmonics [7].”
BackgroundLi, H., Wang, Q., Wu, Q., Xiao, L., Li, J., & Qi, C. (2024) · IET Power Electronics · doi:10.1049/pel2.12729 · Cited by 3
D’Amato, D., Leuzzi, R., & Monopoli, V. G. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3423690 · Cited by 5
“This family of control approaches uses a purposely designed circulating current waveform to minimize both the rms of circulating current and the voltage ripple of the submodules of theMMC[20],[21],[22],[23],[24].”
BackgroundMethodChen, H., Liu, J., Du, S., Lv, S., & Deng, Z. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3550373 · Cited by 4
“Research on the energy storage requirement reduction method of the MMC for HVdc application has been conducted and reported in the literature [6], [7], [8], [9], [10], [11], [12], [13], [14], [15], [16], [17], [18], [19], [20], [21], [22], [23], [24], [25], [26], [27], [28].”
Control of a grid connected modular multilevel converter under pulsed DC load
Jankovic, M., Costabeber, A., Watson, A. J., & Clare, J. (2015) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2015.7392482 · Cited by 3
“The moduification of the circulating current reference based on evaluating the oscillating energy/power in the arms is presented in [8].”
Online Trajectory Planning During Low-Voltage FRT of a Modular Multilevel Converter
Fehr, H., & Gensior, A. (2020) · European Conference on Power Electronics and Applications · doi:10.23919/epe20ecceeurope43536.2020.9215849 · Cited by 3
“Introduction This paper focuses on the open-loop control of the Modular Multilevel Converter (MMC) arm energies during large-signal transients in order to add feed-forward currents supporting the well-proven feedbackbased [1–3] energy balancing.”
BackgroundPareto Frontier of the Arm Energy Ripple and the Conduction Losses of a Modular Multilevel Converter
Lopez, M., Fehr, H., Pérez, M. A., & Gensior, A. (2021) · Energies · doi:10.3390/en14020392 · Cited by 4
Fast and fault‐tolerant model predictive control of MMCs under selective harmonic elimination
Mohammadhassani, A., & Mehrizi‐Sani, A. (2022) · IET Generation Transmission & Distribution · doi:10.1049/gtd2.12679 · Cited by 3
Low-Capacitance Modular Multilevel Converters Under Average Capacitor Voltage Reduction Control
Yu, Q., Deng, F., & Tang, Y. K. (2022) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon49645.2022.9968676 · Cited by 4
“In [10] and [11], different circulating current control methods are presented to minimize the capacitor voltage ripple.”
MethodSoomro, J. B., Akhtar, F., Kumar, D., Munir, H. M., Ali, K., Alsaif, F. K., & Alsulamy, S. (2023) · Frontiers in Energy Research · doi:10.3389/fenrg.2023.1190975 · Cited by 6
“Various strategies for addressing the MMC SM CVR and CC under unbalanced grid situations have been presented in literature (Ilves et al, 2011; Pou et al., 2014; Wang et al, 2018a; Li et al, 2019a; Wang et al, 2020a; Wang et al., 2020b; Wang et al, 2020c; Wang et al, 2021).”
BackgroundA Collaborative Injection Strategy for Capacitor Voltage Fluctuation Reduction of MMC
Zhao, Z., Li, T., Guo, C., Wang, J., Zheng, K., & Teng, S. (2023) · IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea58696.2023.10241389 · Cited by 3
“So it’s a good way to eliminate the second harmonic component in capacitor voltage by second harmonic circulating current injection, and when the second harmonic circulating current meet the relation in (8), the second harmonic component in capacitor voltage can be eliminated completely [10]-[13].”
BackgroundAljawary, Z. A., de Pablo, S., Herrero, L. C., & Martinez‐Rodrigo, F. (2020) · Energies · doi:10.3390/en13215585 · Cited by 3
“The most straightforward method of gaining these additional levels is interleaving upper and lower carriers [24] while maintaining the effective switching frequency of each SM constant, but at the cost of increased internal currents and losses.”
MethodLoss distribution and characterization of MMC sub‐modules for HVDC applications
Tian, Y., Wickramasinghe, H. R., Pou, J., & Konstantinou, G. S. (2021) · International Transactions on Electrical Energy Systems · doi:10.1002/2050-7038.13042 · Cited by 6
Self-citationA New Arm Voltage Control Scheme for a Single Phase Modular Multilevel Converter
Abdayem, A., Sawma, J., Khatounian, F., Monmasson, É., & Ghosn, R. (2021) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon48115.2021.9589714 · Cited by 5
“Basically, there are two objectives when controlling the circulating current: the first is to reduce the power losses in the upper and lower arms [10], [11] and the second is to reduce the ripples in the capacitor voltages [12], [13].”
BackgroundQuasi-Z-source modular cascaded converter for high-power photovoltaic system
Liu, Y., Abu‐Rub, H., & Ge, B. (2016) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2016.7474929 · Cited by 3
“Owing to the considerable advantages of modular multilevel converter (MMC) in medium-voltage (MV) and high-voltage (HV) areas [10], [11], a dc-ac MMC-based PV system was integrated into utility grid by PV panels in series connection boosting the voltage level [12].”
BackgroundA Novel Three-Level Voltage Source Converter for AC–DC–AC Conversion
Ye, Z., Chen, A., Mao, S., Wang, T., Yu, D., & Deng, X. (2018) · Energies · doi:10.3390/en11051147 · Cited by 3
“Besides, there are some other topologies, such as five-level active neutral-point-clamped MC (5L-ANPC) [13], modular MC (MMC) [9,10], and some newly-developed MC [14–16].”
Capacitor Ripple Reduction with Novel Modulation Scheme in Modular Multilevel Converters
Rahmati, S., Veysinejad, A., & Bina, M. T. (2020) · Power Electronics, Drive Systems, and Technologies Conference (PEDSTC) · doi:10.1109/pedstc49159.2020.9088441 · Cited by 3
“Reference [15] evaluated three different references and compared their efficacy in capacitors voltage ripple reduction.”
BackgroundCapacitor Energy Variations in MMC Using Harmonics Injection
Hafeez, K., Khan, S., den Bossche, A. V., & Eddinne, K. D. (2020) · Power Electronics and Drives · doi:10.2478/pead-2020-0007 · Cited by 3
“Multiple harmonics are injected in the circulating current reference to reduce the capacitor voltage fluctuations using a closed loop strategy (Pou et al., 2015).”
BackgroundMethodA Hybrid VSC-HVDC System based on Modular Multilevel Converter and Alternate Arm Converter
Wickramasinghe, H. R., Sun, P., & Konstantinou, G. S. (2020) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon43393.2020.9254704 · Cited by 3
Self-citationOptimization Methods to Reduce Capacitor Stress in Modular Multilevel Converters
Petranovic, N., Cantoni, A., Townsend, C. D., & Konstantinou, G. S. (2020) · IEEE Access · doi:10.1109/access.2020.3043254 · Cited by 4
“The arm voltages and currents have been formulated generically to include nominal voltage vNpq(t) and current iNpq(t), injected voltages, vIVpq(t), and circulating currents, iCCpq(t); which can be created in an MMC [12]–[21], [26], [27].”
BackgroundMethodSelf-citationHahn, F., Andresen, M., & Liserre, M. (2019) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2019.8722065 · Cited by 3
“In contrast, the differential voltage describes the voltage across the arm inductors and can be used to control the circulating currents [10].”
BackgroundDiscrete Time Adaptive Observation of Capacitor Voltage of Modular Multilevel Converters
Samantaray, J., Chakraborty, R., Chakrabarty, S., & Dey, A. (2020) · IEEE India Conference · doi:10.1109/indicon49873.2020.9342491 · Cited by 3
“With N HBSMs at every arms, the MMC can be modulated to have either N+1 [20] or 2N+1 [21] number of levels at the pole voltage ( in Fig.”
MethodRen, P., Guo, Q., Hou, Y., Tu, C., Zhu, D., & Sun, K. (2025) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2025.3561828 · Cited by 3
“The traditional circulating current suppression control strategies mainly control the circulating current by introducing common-mode components into the arm voltage through controllers such as proportional-integral (PI) controllers and proportional-resonant (PR) controllers [21], [22], [23], [24].”
Device Loading of a Modular Multilevel Converter with Flying Capacitor Submodules
Ronanki, D., & Williamson, S. S. (2018) · IEEE International Conference on Power Electronics, Drives and Energy Systems · doi:10.1109/pedes.2018.8707700 · Cited by 2
“Therefore, closed-loop CC suppression controllers are usually employed to eliminate harmonic components in CC [16]–[18].”
BackgroundHu, X., Zhang, J., Deng, F., Gui, C., Chen, Q., & Din, Z. (2020) · Journal of Power Electronics · doi:10.1007/s43236-020-00104-9 · Cited by 2
Metadata
- Authors
- Pou, J., Ceballos, S., Konstantinou, G., Agelidis, V. G., Picas, R., & Zaragoza, J.
- Affiliations
- UNSW Sydney (AU)
- Tecnalia (ES)
- Universitat Politècnica de Catalunya (ES)
- ORCID
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-02
- Volume
- 62
- Issue
- 2
- Pages
- 777-788
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2030899995
- Cited by
- 406
- References
- 31
- Citations by year
- 2026: 9 · 2025: 20 · 2024: 29 · 2023: 34 · 2022: 31 · 2021: 45 · 2020: 48 · 2019: 39 · 2018: 42 · 2017: 43 · 2016: 31 · 2015: 30
- FWCI
- 19.29
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Locations
- IEEE Transactions on Industrial Electronics (publishedVersion)
- RECERCAT (Consorci de Serveis Universitaris de Catalunya) (acceptedVersion, other-oa)
- UPCommons institutional repository (Universitat Politècnica de Catalunya) (acceptedVersion, other-oa)
- UNSWorks (UNSW Sydney) (submittedVersion, cc-by-nc-nd)
- LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) (submittedVersion, public-domain)
- TECNALIA Publications (Fundación TECNALIA Research & Innovation) (submittedVersion, public-domain)
- UNSWorks (University of New South Wales, Sydney, Australia) (submittedVersion, cc-by-nc-nd)
- Funders
- Ministerio de Economía y Competitividad of Spain (ENE2012-36871-C02-00)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › HVDC Systems and Fault Protection
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Keywords
- modular multilevel converter, modulated signals, capacitor voltage ripple, feedback control, capacitor voltage balancing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.