Circulating Current Injection Methods Based on Instantaneous Information for the Modular Multilevel Converter
Open accessThe DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Abstract
This paper studies different circulating current references for the modular multilevel converter. The circulating current references are obtained from the instantaneous values of the output current and modulation signal of the phase leg. Therefore, the determination of the amplitude and phase of the output current is not needed, which is a significant improvement compared to other methods such as those based on injecting specific harmonics in the circulating currents. Among the different methods studied in this paper, a new method is introduced, which is able to reduce the capacitor voltage ripples compared to the other methods. A closed-loop control is also proposed which is able to track the circulating current references. With the discussed methods, the average values of the capacitor voltages are maintained at their reference while the voltage ripples are kept low. Experimental results are presented to demonstrate the effectiveness of the proposed and discussed methods.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Recent Advances and Industrial Applications of Multilevel Converters
Kouro, S., Malinowski, M., Gopakumar, K., Pou, J., Franquelo, L. G., Wu, B., Rodriguez, J., Pérez, M. A., & Leon, J. I. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049719 · Cited by 3,872 · cited 1×
“Among various multilevel converter topologies [1], the modular multilevel converter (MMC) [2]–[6] offers several salient features”
BackgroundSelf-citationAn innovative modular multilevel converter topology suitable for a wide power range
Lesnicar, A., & Marquardt, R. (2004) · 2003 IEEE Bologna Power Tech Conference Proceedings, · doi:10.1109/ptc.2003.1304403 · Cited by 2,908
Operation, Control, and Applications of the Modular Multilevel Converter: A Review
Debnath, S., Qin, J., Bahrani, B., Saeedifard, M., & Barbosa, P. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2309937 · Cited by 2,210 · cited 1×
“Among various multilevel converter topologies [1], the modular multilevel converter (MMC) [2]–[6] offers several salient features”
BackgroundControl and Experiment of Pulsewidth-Modulated Modular Multilevel Converters
Hagiwara, M., & Akagi, H. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2014236 · Cited by 1,565
Tu, Q., Xu, Z., & Xu, L. (2011) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2011.2115258 · Cited by 1,387 · cited 2×
“Three references are obtained for the circulating current, and the first one injects only a dc component, which is based on [21] and [22].”
BackgroundCircuit Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters
Perez, M. A., Bernet, S., Rodriguez, J., Kouro, S., & Lizana, R. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2310127 · Cited by 1,346
Dynamic Performance of a Modular Multilevel Back-to-Back HVDC System
Saeedifard, M., & Iravani, R. (2010) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2010.2050787 · Cited by 1,188 · cited 2×
“2336608 which make it a potential candidate for various applications, including high-voltage-direct-current transmission systems [7]–[9], flexible-alternating-current-transmission-system controllers [10], photovoltaic generation [11], wind turbine applications [12], and motor drives [13]–[15].”
BackgroundClassification, Terminology, and Application of the Modular Multilevel Cascade Converter (MMCC)
Akagi, H. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143431 · Cited by 1,172
Dynamic Analysis of Modular Multilevel Converters
Harnefors, L., Antonopoulos, A., Norrga, S., Angquist, L., & Nee, H.-P. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2194974 · Cited by 623
A new modular voltage source inverter topology
Marquardt, R. (2003) · Medical Entomology and Zoology · Cited by 503
Cited by
Dekka, A., Wu, B., Fuentes, R. L., Perez, M., & Zargari, N. R. (2017) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2017.2742938 · Cited by 576
“, CMV on the ac-side and a circulating current between the converter legs [166]–[168].”
Leon, J. I., Vazquez, S., & Franquelo, L. G. (2017) · Proceedings of the IEEE · doi:10.1109/jproc.2017.2726583 · Cited by 481
“In a similar way, in [115], the circulating current injection method is based on the instantaneous values of the converter output current.”
MethodModular Multilevel Converters for Transportation Electrification: Challenges and Opportunities
Ronanki, D., & Williamson, S. S. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2792330 · Cited by 345
Modular Multilevel Converters: Recent Achievements and Challenges
Perez, M. A., Ceballos, S., Konstantinou, G., Pou, J., & Aguilera, R. P. (2021) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2021.3060791 · Cited by 327
“culating current strategies considering all the possible operating points of the converter [52].”
BackgroundSelf-citationGong, Z., Dai, P., Yuan, X., Wu, X., & Guo, G. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2497254 · Cited by 185
“In addition, other controllers have also been introduced to achieve the control targets, such as resonant controllers in [21] and repetitive controllers in [22].”
BackgroundLi, X., Song, Q., Liu, W., Xu, S., Zhu, Z., & Li, X. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2480748 · Cited by 166
“The main existing circulating current control strategies are injecting second-harmonic voltages [10], injecting multiple harmonic voltages [12], [13], [15], predictive control [11], and openloop control [21].”
BackgroundA Review of Multilevel Converters With Parallel Connectivity
Fang, J., Blaabjerg, F., Liu, S., & Goetz, S. M. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3075211 · Cited by 177
Fault-Tolerant Approach for Modular Multilevel Converters Under Submodule Faults
Deng, F., Tian, Y., Zhu, R., & Chen, Z. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2538201 · Cited by 154
“According to [30] and [31], the capacitor voltages ucau and ucal in the upper and lower arms of phase A can be expressed as ⎪⎪⎨ ⎪⎪⎩ ucau = 1”
BackgroundMarzoughi, A., Burgos, R. P., Boroyevich, D., & Xue, Y. S. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2767538 · Cited by 157
“installed capacitances in converter structure [33].”
Huang, J., Yang, B., Guo, F., Wang, Z., Tong, X., Zhang, A., & Xiao, J. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2774725 · Cited by 152
“rent, several methods have been proposed [19]–[21].”
Modular Multilevel Converter Circulating Current Reduction Using Model Predictive Control
Ben-Brahim, L., Gastli, A., Trabelsi, M., Ghazi, K. A., Houchati, M., & Abu-Rub, H. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2519320 · Cited by 148
Bahrani, B., Debnath, S., & Saeedifard, M. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2405062 · Cited by 140
“One of the main technical challenges associated with the operation of the MMC is the magnitude of the circulating currents within its phase legs [10], [11].”
BackgroundReliable Modular Multilevel Converter Fault Detection With Redundant Voltage Sensor
Picas, R., Zaragoza, J., Pou, J., & Ceballos, S. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2526684 · Cited by 134
“A circulating current controller [14] is implemented to regulate the internal dynamics of the converter as well as to reduce capacitor voltage ripples.”
BackgroundSelf-citationDarus, R., Pou, J., Konstantinou, G., Ceballos, S., Picas, R., & Agelidis, V. G. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2359005 · Cited by 131
Self-citationDistributed Control for a Modular Multilevel Converter
Yang, S., Tang, Y. K., & Wang, P. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2751254 · Cited by 136
“In some specific applications such as capacitor voltage ripple shaping [37], [38] and motor drives in low-frequency operations [35]–[39], [40], another ac term, e.”
BackgroundDekka, A., Wu, B., Zargari, N. R., & Fuentes, R. L. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2514346 · Cited by 128
“culating current control along with a zero sequence voltage injection is employed in the carrier pulse-width modulation (CPWM) and NLC approaches [8], [9].”
MethodTang, Y., Chen, M., & Ran, L. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2511189 · Cited by 130
“Otherwise, the switching loss would be high and the arm output voltage will be large [4].”
BackgroundThermal Analysis and Balancing for Modular Multilevel Converters in HVDC Applications
Hahn, F., Andresen, M., Buticchi, G., & Liserre, M. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2691012 · Cited by 120
Modular Multilevel Converter DC Fault Protection
Cwikowski, O., Wickramasinghe, H. R., Konstantinou, G., Pou, J., Barnes, M., & Shuttleworth, R. (2018) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2017.2715833 · Cited by 118
Self-citationPicas, R., Ceballos, S., Pou, J., Zaragoza, J., Konstantinou, G., & Agelidis, V. G. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2368055 · Cited by 116
“The DPWM was also combined with a closed-loop strategy for the control of the circulating current, using references determined from the instantaneous magnitudes of the reference voltage signal and output current of each phase leg [20]–[22].”
BackgroundMethodSelf-citationImproved Design and Control of FBSM MMC With Boosted AC Voltage and Reduced DC Capacitance
Hu, J., Xiang, M., Lin, L., Lu, M., Zhu, J., & He, Z. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2739679 · Cited by 120
“For HBSM-MMC, second-harmonic circulating current injection is recognized as an effective solution for reducing the capacitor voltage ripple.”
BackgroundInfluentialOperation and Control Methods of Modular Multilevel Converters in Unbalanced AC Grids: A Review
Li, J., Konstantinou, G. S., Wickramasinghe, H. R., & Pou, J. (2018) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2856505 · Cited by 115
Self-citationAnalysis and Injection Control of Circulating Current for Modular Multilevel Converters
Wang, J., Han, X., Ma, H., & Bai, Z. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2808901 · Cited by 109
“To avoid above drawbacks, a method only requiring the instantaneous values of the output current and the modulation signals is proposed to obtain the circulating current references in [22] and [23].”
MethodResultA New Circuit Performance of Modular Multilevel Inverter Suitable for Photovoltaic Conversion Plants
Nademi, H., Das, A., Burgos, R. P., & Norum, L. E. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2015.2509599 · Cited by 110
Model Predictive Control With Common-Mode Voltage Injection for Modular Multilevel Converter
Dekka, A., Wu, B., Yaramasu, V., & Zargari, N. R. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2558579 · Cited by 111
“The second-and fourth-order harmonic CC components are also used to minimize voltage ripple [17].”
MethodBeyond the MMC: Extended Modular Multilevel Converter Topologies and Applications
Sun, P., Tian, Y., Pou, J., & Konstantinou, G. S. (2022) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2022.3175714 · Cited by 108
Self-citationLoss Optimization of MMC by Second-Order Harmonic Circulating Current Injection
Yang, L., Li, Y., Li, Z., Wang, P., Xu, S., & Gou, R. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2751068 · Cited by 97
“The SHCC injection method has also been mentioned in [27].”
MethodZhao, C., Li, Y., Li, Z., Wang, P., Ma, X., & Luo, Y. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2660532 · Cited by 96
“In addition, authors in [28] and [29] provided a strategy by circulating current injection in order to minimize”
BackgroundPérez-Basante, A., Ceballos, S., Konstantinou, G. S., Pou, J., Andreu, J., & de Alegría, I. M. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2666847 · Cited by 104
“On the other hand, a circulating current, icirc , control technique must be utilized along with (2N+1) SHE-PWM, without disturbing the phase output voltage, va0 , with the aim of controlling the SM capacitor voltage and reducing the MMC losses [27].”
MethodSelf-citationFault Current Estimation in Multi-Terminal HVdc Grids Considering MMC Control
Langwasser, M., Carne, G. D., Liserre, M., & Biskoping, M. (2018) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2018.2887166 · Cited by 95
“The average capacitor voltage is controlled by the corresponding circulating current in each phase [20].”
BackgroundDecoupled Current Model and Control of Modular Multilevel Converters
Lizana, R., Perez, M. A., Arancibia, D., Espinoza, J. R., & Rodriguez, J. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2405900 · Cited by 87
“These currents could be minimized to reduce losses and improve controllability [30], or they could be controlled to minimize the capacitor voltage ripple, reducing the required capacitance of the power cell [31].”
BackgroundYang, S., Wang, P., Tang, Y. K., Zagrodnik, M. A., Hu, X., & Tseng, K. J. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2749257 · Cited by 90
“where UC is the average voltage across the SM capacitor, mx = 2Uox/Udc is the modulation index, ωo denotes the fundamental angular frequency, φx stands for the phase angle of the output voltage, idiff x refers to the differential current in the phase leg [12], and iox represents the output current of the MMC.”
BackgroundMachine Learning Emulation of Model Predictive Control for Modular Multilevel Converters
Wang, S., Dragičević, T., Gontijo, G., Chaudhary, S. K., & Teodorescu, R. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.3038064 · Cited by 88
Marzo, I., Sanchez-Ruiz, A., Barrena, J. A., Abad, G., & Muguruza, I. (2021) · IEEE Access · doi:10.1109/access.2021.3103337 · Cited by 93
“The MMCmay also require a solution to control the circulating current between the upper and lower arms of each phase cluster [41].”
BackgroundAn Optimized Circulating Current Control Method Based on PR and PI Controller for MMC Applications
Isik, S., Alharbi, M., & Bhattacharya, S. (2021) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2021.3092298 · Cited by 87
A Modular High-Voltage Pulse-Generator With Sequential Charging for Water Treatment Applications
Elserougi, A. A., Massoud, A. M., & Ahmed, S. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2515055 · Cited by 78
Review on DC transmission systems for integrating large‐scale offshore wind farms
Li, Z., Song, Q., An, F., Zhao, B., Yu, Z., & Zeng, R. (2021) · Energy Conversion and Economics · doi:10.1049/enc2.12023 · Cited by 83
Control of Circulating Currents in Modular Multilevel Converters Through Redundant Voltage Levels
Konstantinou, G., Pou, J., Ceballos, S., Picas, R., Zaragoza, J., & Agelidis, V. G. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2512842 · Cited by 75
“the currents through the upper and lower arms, and consequently through the upper and lower arm capacitors, can be written as [20]”
BackgroundSelf-citationKonstantinou, G. S., Pou, J., Ceballos, S., Darus, R., & Agelidis, V. G. (2015) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2015.2416759 · Cited by 79
Self-citationCirculating Current Optimization Control of MMC
Reddy, G. A., & Shukla, A. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2977565 · Cited by 73
“For example, a CC control scheme is discussed in [40] and another in [41] to meet these objectives by injecting an SHCC component.”
BackgroundA Simplified Analytical Calculation Model of Average Power Loss for Modular Multilevel Converter
Yang, L., Li, Y., Li, Z., Wang, P., Xu, S., & Gou, R. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2779417 · Cited by 72
“is taken into consideration in the proposed loss model due to some operation conditions under which the circulating current is not controlled to zero [17]–[19]; it is suitable for different NLM-based voltage balancing control schemes; additionally, the parameters of this simplified model are easy to obtain.”
MethodMo, R., Li, H., & Shi, Y. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2885278 · Cited by 70
“TDR since circulation current becomes larger [8].”
Liang, G., Tafti, H. D., Farivar, G. G., Pou, J., Townsend, C. D., Konstantinou, G. S., & Ceballos, S. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3014739 · Cited by 72
“By analyzing the equivalent common and differential mode circuits, the relationships among the main electrical variables of the MMC can be deduced [24].”
BackgroundMethodInfluentialSelf-citationApplication of Third-Order Harmonic Voltage Injection in a Modular Multilevel Converter
Guo, G., Song, Q., Yang, W., Wang, Y., Liu, W., Rao, H., & Xu, S. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2777413 · Cited by 74
“When an MMC operates in proper condition, a low modulation wave peak value indicates a high ac voltage output capacity where the operation range can be extended [15].”
Comparison and evaluation of sub-module configurations in modular multilevel converters
Konstantinou, G., Zhang, J., Ceballos, S., Pou, J., & Agelidis, V. G. (2015) · 2015 IEEE 11th International Conference on Power Electronics and Drive Systems · doi:10.1109/peds.2015.7203440 · Cited by 66
“The arm currents are then defined as [19]:”
BackgroundSelf-citationNew Measuring Technique for Reducing the Number of Voltage Sensors in Modular Multilevel Converters
Picas, R., Zaragoza, J., Pou, J., Ceballos, S., & Balcells, J. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2412658 · Cited by 62
Self-citationCurrent Source Modular Multilevel Converter: Detailed Analysis and STATCOM Application
Bhesaniya, M. M., & Shukla, A. (2015) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2015.2465152 · Cited by 64
“additional control effort for limiting the circulating current is required in VSMMC [27].”
BackgroundResultSteady-State Loss Model of Half-Bridge Modular Multilevel Converters
Rodrigues, S., Papadopoulos, A., Kontos, E., Todorcevic, T., & Bauer, P. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2519510 · Cited by 61
Analysis and Control of Modular Multilevel Converters under Asymmetric Arm Impedance Conditions
Zeng, R., Xu, L., Yao, L., & Finney, S. J. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2477057 · Cited by 61
“HE modular multilevel converter (MMC) has drawn attention due to its advantages of modular design, high efficiency and scalability, and excellent output waveforms with low harmonic distortion [1-10].”
BackgroundGhat, M. B., & Shukla, A. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2751680 · Cited by 65
“A circulating current control is necessary to reduce such impacts [11]–[13].”
BackgroundVasiladiotis, M., Cherix, N., & Rufer, A. C. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2437329 · Cited by 64
“The concept of second-order circulating current imposition for capacitor voltage ripple reduction is investigated, extending the idea followed by many researchers during balanced grid conditions [25], [27]–[29].”
BackgroundDual Harmonic Injection for Reducing the Submodule Capacitor Voltage Ripples of Hybrid MMC
Xu, J., Weicheng, D., Gao, C., Lu, F., Liang, J., Zhao, C., & Li, G. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3027464 · Cited by 62
“Therefore, [21] is selected as the comparison reference, which is defined as a “classical injection method””
BackgroundMethodInfluentialA Hybrid Modular Multilevel Converter Family With Higher Power Density and Efficiency
Liu, J., Dong, D., & Zhang, D. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3055690 · Cited by 60
“Multiple techniques are proposed to inject appropriate harmonics in the circulating current to reduce dc-link capacitor voltage ripple [16], [17], such as second and fourth harmonic current components.”
BackgroundSamajdar, D., Bhattacharya, T., & Dey, S. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2896932 · Cited by 62
“To clearly demonstrate the performance of the modulation method, simulation results comparing the method with other prevalent techniques like “CCSC” [14] and “forced circulating current control” (FCCC) [17] are furnished.”
BackgroundMethodInfluentialA Novel Two-Stage Model Predictive Control for Modular Multilevel Converter With Reduced Computation
Guo, P., He, Z., Yue, Y., Xu, Q., Huang, X., Chen, Y., & Luo, A. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2868312 · Cited by 56
“On the other hand, according to [27] and [31], the circulating current, which is composed of dc and harmonic components, can be stimulated by the imbalance voltage uun between dc bus Udc and internal voltage uin.”
BackgroundJia, G., Chen, M., Tang, S. Y., Zhang, C., & Zhu, G. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3016493 · Cited by 59
“Similarly, in [19] and [26], a second harmonic as well as a fourth harmonic are injected into the circulating current of the MMC to offset the even-order ripple powers, which are phase powers in the upper and lower arms, and then reduce the capacitor voltage fluctuations and power losses.”
BackgroundChaudhuri, N. R., Oliveira, R., & Yazdani, A. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2480845 · Cited by 61
Picas, R., Zaragoza, J., Pou, J., Ceballos, S., Konstantinou, G., & Capella, G. J. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2847621 · Cited by 54
“The common energy balancing controllers based on the injection of a fundamental component, as in [18], [30], do not present an optimal performance with this modulation technique.”
MethodInfluentialSelf-citationResearch on Capacitance Selection for Modular Multi-Level Converter
Liu, Z., Li, K., Wang, J., Javid, Z., Wang, M., & Sun, K. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2886219 · Cited by 56
“itance should be large enough to limit the capacitor-voltage fluctuation lower than the safety value because the excessive voltage fluctuation will result in the breakdown of semiconductor devices and reduce the stability of the converter [10]–[12].”
BackgroundAlternate Arm Converters-Based HVDC Model Compatible With the CIGRE B4 DC Grid Test System
Wickramasinghe, H. R., Konstantinou, G. S., Li, Z., & Pou, J. (2018) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2018.2850933 · Cited by 52
“The overlap operation of the AAC mimics the MMC operation, and AAC arm currents (iu and il) during the overlap period can be defined based on the MMC operation [18].”
MethodSelf-citationZhao, C., Hu, Y., Luan, K., Xu, F., Li, Z., Wang, P., & Li, Y. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2906349 · Cited by 55
“Moreover, the SM voltage fluctuations can be further reduced by injecting appropriate circulating current [22], [23], and an optimal circulating current”
BackgroundPizarro, G., Poblete, P., Droguett, G., Pereda, J. E., & Núñez, F. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3165286 · Cited by 50
Optimized Control of the Modular Multilevel Converter Based on Space Vector Modulation
Deng, Y., Wang, Y., Teo, K. H., Saeedifard, M., & Harley, R. G. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2747584 · Cited by 53
“Based on (8)–(11), the steady-state capacitor voltages and arm currents can be estimated as in [19] to specify the SM capacitors and buffer inductors.”
BackgroundJia, G., Chen, M., Tang, S. Y., Zhang, C., & Zhao, B. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2982440 · Cited by 51
“Similarly, in [12], a second harmonic is injected into the circulating currents of each phase to reduce the second-order frequency capacitor voltage fluctuation [13].”
BackgroundLi, J., Konstantinou, G., Wickramasinghe, H. R., Pou, J., Wu, X., & Jin, X. (2018) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2017.2747079 · Cited by 49
“Several methods [28]–[30] for reducing the capacitor ripples have been proposed in balanced operation.”
BackgroundMethodSelf-citationModular Multilevel Converter-Based Microgrid: A Critical Review
Bashir, S. B., Ismail, A. A. A., Elnady, A., Farag, M. M., Hamid, A.-K., Bansal, R. C., & Abo-Khalil, A. G. (2023) · IEEE Access · doi:10.1109/access.2023.3289829 · Cited by 59
“lating current (SHCC) [100], [132], [133], [134], [135].”
BackgroundSubmodule Temperature Regulation and Balancing in Modular Multilevel Converters
Goncalves, J., Rogers, D. J., & Liang, J. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2795588 · Cited by 50
“to eliminate circulating currents within the converter arms [5] and a dedicated capacitor voltage balancing algorithm [6], responsible for sharing voltage equally across all operating SMs, which are inserted and bypassed in order to generate a multilevel ac voltage waveform.”
BackgroundSun, Y., Teixeira, C. A., Holmes, D. G., McGrath, B. P., & Zhao, J. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2670369 · Cited by 52
“For example, interarm and interphase dclink voltage balancing can be realized by injecting fundamental frequency positive and negative sequence circulating currents [6], while dc-link common-mode voltage ripples can be eliminated by allowing an appropriate second-order harmonic to flow in the circulating current [7]–[…”
BackgroundHighly Resilient Fault-Tolerant Topology of Single-Phase Multilevel Inverter
Jalhotra, M., Sahu, L. K., Gupta, S., & Gautam, S. P. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2936271 · Cited by 46
“the circulating current [15], energy balancing [16], and capacitor voltage balancing [17] issues.”
BackgroundCapacitor voltage ripple reduction with state trajectory analysis for modular multilevel converter
Lyu, Y., Li, C., Hsieh, Y.-H., Lee, F. C., Li, Q., & Xu, R. (2017) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2017.7930947 · Cited by 46
“However, the high frequency components are undesired at high power grid-tied applications [5].”
BackgroundLiu, Y., Abu‐Rub, H., & Ge, B. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2598675 · Cited by 42
Low-Capacitance Modular Multilevel Converter Operating With High Capacitor Voltage Ripples
Song, Q., Yang, W., Zhao, B., Meng, J., Xu, S., & Zhu, Z. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2885687 · Cited by 45
Liang, G., Farivar, G. G., Ceballos, S., Tafti, H. D., Pou, J., Townsend, C. D., & Konstantinou, G. S. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3137442 · Cited by 45
Self-citationDarus, R., Pou, J., Konstantinou, G. S., Ceballos, S., & Agelidis, V. G. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2014.0930 · Cited by 45
Self-citationWang, S., Dragičević, T., Gao, Y., Chaudhary, S. K., & Teodorescu, R. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2982109 · Cited by 45
“In [7], ac circulating current reference is derived from the instantaneous capacitance with the upper and lower arm under single-phase grid.”
BackgroundMethodProtection Scheme for Modular Multilevel Converters Under Diode Open-Circuit Faults
Deng, F., Zhu, R., Liu, D., Wang, Y., Wang, H., Chen, Z., & Cheng, M. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2702748 · Cited by 42
“Each half bridge is composed of a top IGBT/Diode (Tt/dt) and a bottom IGBT/Diode (Tb/db) [27-30].”
BackgroundGradient-Based Energy Balancing and Current Control for Alternate Arm Converters
Wickramasinghe, H. R., Konstantinou, G. S., & Pou, J. (2017) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2017.2785386 · Cited by 42
“Hence, the arm currents (iu and il) during the overlap period can be expressed similarly to the arm currents of the MMC [24], referring to Fig.”
BackgroundSelf-citationDong, Y., Tang, J., Yang, H., Li, W., & He, X. (2018) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2879915 · Cited by 41
“Generally, the second-order circulating current is suppressed with the circulating current suppression control (CCSC) [28], [29].”
BackgroundChakraborty, R., & Dey, A. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.3021641 · Cited by 39
“The second harmonic injection into the circulating current was proposed in [25] that results in a minimum capacitor voltage ripple.”
BackgroundMethodInfluentialModel Predictive Pulse Pattern Control for Modular Multilevel Converters
Vasiladiotis, M., Christe, A., & Geyer, T. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2868294 · Cited by 38
Analysis and Assessment of Modular Multilevel Converter Internal Control Schemes
Wang, S., Adam, G. P., Massoud, A. M., Holliday, D., & Williams, B. W. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2899794 · Cited by 41
Fast Model-based Predictive Control (FMPC) for grid connected Modular Multilevel Converters (MMC)
Ramírez, D., Zarei, M. E., Gupta, M., & Serrano-Delgado, J. (2020) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2020.105951 · Cited by 38
Optimized Design and Control for Hybrid MMC With Reduced Capacitance Requirements
Dong, P., Lyu, J., & Cai, X. (2018) · IEEE Access · doi:10.1109/access.2018.2869400 · Cited by 37
Yang, R., Li, B., Wang, G., Cecati, C., Zhou, S., & Xu, D. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2600762 · Cited by 37
“The common mode current is also called the circulating current, and the differential current is the converter output current [17].”
BackgroundMethodInfluentialA Novel Circulating Current Controller for MMC Capacitor Voltage Fluctuation Suppression
Xu, Y., Xu, Z. G., Zhang, Z., & Xiao, H. (2019) · IEEE Access · doi:10.1109/access.2019.2933220 · Cited by 40
“To avoid the use of the lookup table, reference [24] and [25] proposed a method to obtain the reference value of circulating current from the instantaneous values of the output current and modulation signal of the phase leg.”
BackgroundMethodPérez-Basante, A., Ceballos, S., Konstantinou, G. S., Pou, J., Sanchez-Ruiz, A., Ropero, I. L., & de Alegría, I. M. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2964522 · Cited by 43
“In this way, with the aim of comparing the losses, the first band of harmonics provided by PD-PWM will be centred in 2650 Hz, utilizing fc = 2650 Hz (for instance, in case of ma = 0.9, fsw−PDPWM = 3100 Hz).”
BackgroundMethodSelf-citationKolluri, S., Gorla, N. B. Y., & Panda, S. K. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2971737 · Cited by 39
“The authors in [17] use multiple proportional-resonant (PR) controllers in parallel, which are tuned to specific harmonic frequencies.”
BackgroundMethodRodríguez, E., Leyva, R., Liu, Q., Townsend, C. D., Farivar, G. G., Ceballos, S., & Pou, J. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3063608 · Cited by 37
“This article proposes a novel compensation method based on circulating current injection for three-phase LC-StatComs with delta configuration [18]–[22] with the purpose of increasing the operation range to full inductive mode.”
MethodSelf-citationWickramasinghe, H. R., Konstantinou, G. S., Pou, J., & Agelidis, V. G. (2017) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2017.2709789 · Cited by 37
“2) The duty ratio of each arm (upper/lower) is evenly distributed among the SMs and denoted by du and dl [12]: du = (1−vam−v2am)/2 dl = (1+vam−v2am)/2, (14) where vam = ma cos(ωt) represents the normalized output voltage reference, and the modulation index (ma) is within the range [0,1].”
BackgroundMethodInfluentialSelf-citationMa, Y., Xiao, J., Lin, H., & Wang, Z. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.3044780 · Cited by 37
Song, Q., Yang, W., Zhao, B., Xu, S., Rao, H., & Zhu, Z. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2869464 · Cited by 35
“Second-order circulating current injection is used to reduce the SM capacitor voltage ripple because second-order circulating currents are directly related to SM voltage ripples [9], [10].”
MethodComprehensive Comparison of Modular Multilevel Converter Internal Energy Balancing Methods
Milovanović, S., & Dujić, D. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3052607 · Cited by 38
Sequential Phase-Shifted Model Predictive Control for Modular Multilevel Converters
Poblete, P., Neira, S., Aguilera, R. P., Pereda, J. E., & Pou, J. (2021) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2021.3074863 · Cited by 34
Self-citationInverse Application of Artificial Intelligence for the Control of Power Converters
Gao, Y., Wang, S., Hussaini, H., Yang, T., Dragičević, T., Bozhko, S. V., Wheeler, P. W., & Vázquez, S. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3209093 · Cited by 36
“However, finding a proper circulating current reference under various unbalanced grids to achieve desired ripples analytically is very complicated [32], [33], [34].”
BackgroundMethodHollweg, G. V., Khan, S. A., Chaturvedi, S., Fan, Y., Wang, M., & Su, W. (2023) · Energies · doi:10.3390/en16093611 · Cited by 37
Liu, Z., Li, K., Wang, J., Liu, W., Javid, Z., & Wang, Z.-D. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2969103 · Cited by 33
“in [13]–[16]; based on their models, different expressions of the injected circulating current are derived according to application conditions.”
BackgroundA Survey on Fault Tolerant and Diagnostic Techniques of Multilevel Inverter
Gautam, S. P., Jalhotra, M., Sahu, L. K., Kumar, M. R., & Gupta, K. K. (2023) · IEEE Access · doi:10.1109/access.2023.3285722 · Cited by 38
“on resolving problems with circulating current [92],”
Tanaka, T., Wang, H., & Blaabjerg, F. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2934024 · Cited by 35
“The first group is the second harmonic circulating current injection method [5-10].”
MethodA Novel Submodule Level Fault-Tolerant Approach for MMC With Integrated Scale-Up Architecture
Alharbi, M., Isik, S., & Bhattacharya, S. (2021) · IEEE Journal of Emerging and Selected Topics in Industrial Electronics · doi:10.1109/jestie.2021.3061954 · Cited by 30
“The dc power component in the MMC arms results in a continual delivering or absorbing SM capacitors’ energy, which eventually leads to unbalanced voltages [25].”
BackgroundVariable Rounding Level Control Method for Modular Multilevel Converters
Yin, J., Leon, J. I., Pérez, M. A., Franquelo, L. G., Marquez, A., Li, B., & Vázquez, S. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3020941 · Cited by 31
Metadata
- Authors
- Pou, J., Ceballos, S., Konstantinou, G., Agelidis, V. G., Picas, R., & Zaragoza, J.
- Affiliations
- UNSW Sydney (AU)
- Tecnalia (ES)
- Universitat Politècnica de Catalunya (ES)
- ORCID
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-02
- Volume
- 62
- Issue
- 2
- Pages
- 777-788
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2030899995
- Cited by
- 406
- References
- 31
- Citations by year
- 2026: 9 · 2025: 20 · 2024: 29 · 2023: 34 · 2022: 31 · 2021: 45 · 2020: 48 · 2019: 39 · 2018: 42 · 2017: 43 · 2016: 31 · 2015: 30
- FWCI
- 19.29
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Locations
- IEEE Transactions on Industrial Electronics (publishedVersion)
- RECERCAT (Consorci de Serveis Universitaris de Catalunya) (acceptedVersion, other-oa)
- UPCommons institutional repository (Universitat Politècnica de Catalunya) (acceptedVersion, other-oa)
- UNSWorks (UNSW Sydney) (submittedVersion, cc-by-nc-nd)
- LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) (submittedVersion, public-domain)
- TECNALIA Publications (Fundación TECNALIA Research & Innovation) (submittedVersion, public-domain)
- UNSWorks (University of New South Wales, Sydney, Australia) (submittedVersion, cc-by-nc-nd)
- Funders
- Ministerio de Economía y Competitividad of Spain (ENE2012-36871-C02-00)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › HVDC Systems and Fault Protection
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Keywords
- modular multilevel converter, modulated signals, capacitor voltage ripple, feedback control, capacitor voltage balancing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.