Detection of Localized Bearing Faults in Induction Machines by Spectral Kurtosis and Envelope Analysis of Stator Current
The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Abstract
Early detection of faults in electrical machines, particularly in induction motors, has become necessary and critical in reducing costs by avoiding unexpected and unnecessary maintenance and outages in industrial applications. Additionally, most of these faults are due to problems in bearings. Thus, in this paper, experimental bearing fault detection of a three-phase induction motor is performed by analyzing the squared envelope spectrum of the stator current. Spectral kurtosis-based algorithms, namely, the fast kurtogram and the wavelet kurtogram, are also applied to improve the envelope analysis. Experimental tests are performed, considering outer bearing faults at different stages, and the results are promising.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Envelope analysis also was applied by Leite et al. [85] to detect the bearing fault in induction motor, and the proposed method can efficiently detect fault without any information regarding the model.”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [85]
Citations
Cites
Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review
Nandi, S., Toliyat, H. A., & Li, X. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847955 · Cited by 2,382 · cited 1×
“In this case, the exact location of the defect is expressed by its characteristic frequency whose value can be predicted based on the rolling element bearing geometry, number of balls, and shaft speed [9], [22].”
BackgroundFast computation of the kurtogram for the detection of transient faults
Antoni, J. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.12.002 · Cited by 1,601 · cited 3×
“width in an efficient and computationally feasible way [31].”
BackgroundMethodThe spectral kurtosis: a useful tool for characterising non-stationary signals
Antoni, J. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.09.001 · Cited by 1,441 · cited 3×
“In this way, a time–frequency decomposition based on STFT is performed, and the kurtosis is computed in the time direction for each frequency line [11], [38].”
BackgroundMethodAdvances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140 · cited 3×
“In addition, the SNR can significantly vary in industrial applications [2].”
BackgroundVibration‐based Condition Monitoring: Industrial, Aerospace and Automotive Applications
Randall, R. B. (2011) · Wiley eBooks · doi:10.1002/9780470977668 · Cited by 868 · cited 10×
“In most cases, defects in the bearings are associated with contamination, corrosion, inadequate lubrication, and installation problems such as misalignment and overloading [1], [8]–[11].”
BackgroundMethodInfluentialMotor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartfield, R. G. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475697 · Cited by 761
Barszcz, T., & JabŁoński, A. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.05.018 · Cited by 640 · cited 10×
“digital signal processing methods [11], [30].”
BackgroundMethodInfluentialMotor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartheld, R. G. (2002) · Proceedings of 1994 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.1994.345491 · Cited by 638 · cited 4×
“Here, artificially produced defects are introduced in the bearing outer race to simulate a localized fault, allowing the evaluation of the applied methodology and a critical comparison with other well-known techniques [13], [15], [22], [33], [43].”
BackgroundMethodResultInfluentialReport of Large Motor Reliability Survey of Industrial and Commercial Installations, Part I
(1985) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1985.349532 · Cited by 602
Models for Bearing Damage Detection in Induction Motors Using Stator Current Monitoring
Blodt, M., Granjon, P., Raison, B., & Rostaing, G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.917108 · Cited by 568
Research works printed but not linked: 1
- sawalhi, 2007, Diagnostics prognostics and fault simulation for rolling element bearings
Cited by
Items 101–200 of 274
Attoui, I., & Omeiri, A. (2015) · Electric Power Components and Systems · doi:10.1080/15325008.2015.1082161 · Cited by 27
“Over the past few years, the fault-diagnosis methods of electrical machines, such as the doubly fed induction machine (DFIM), squirrel-cage induction machine [1, 2], and the permanent magnet synchronous machine (PMSM) [3, 4], have been the subject of increased attention.”
BackgroundTowards bearing health prognosis using generative adversarial networks: Modeling bearing degradation
Khan, S. A., Prosvirin, A. E., & Kim, J.-M. (2018) · International Conference on Advancements in Computational Sciences (ICACS) · doi:10.1109/icacs.2018.8333495 · Cited by 32
“Over the past several years, numerous techniques have been proposed to diagnose different types of localized defects in bearings, which can cause them to fail [3-9].”
BackgroundLee, C., & Le, T. (2021) · IEEE Access · doi:10.1109/access.2021.3098024 · Cited by 29
Althobiani, F. (2024) · IEEE Access · doi:10.1109/access.2024.3390234 · Cited by 29
“Therefore, the development of an efficient condition monitoring system using a non-invasive method becomes imperative for early detection of faults [8].”
MethodSaini, M. K., & Aggarwal, A. (2018) · International Transactions on Electrical Energy Systems · doi:10.1002/etep.2577 · Cited by 28
Bearing fault detection of induction motor using SWPT and DAG support vector machines
Abid, F. B., Zgarni, S., & Braham, A. (2016) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2016.7793237 · Cited by 25
Cheng, W. D., Xu, X., Ding, Y., Sun, K., Li, Q., & Dong, L. (2020) · Chinese Journal of Physics · doi:10.1016/j.cjph.2020.03.015 · Cited by 25
A mechanical data analysis using kurtogram and extreme learning machine
Udmale, S. S., & Singh, S. K. (2019) · Neural Computing and Applications · doi:10.1007/s00521-019-04398-0 · Cited by 24
Design of a Novel Electric Diagnostic Technique for Fault Analysis of Centrifugal Pumps
Irfan, M., Alwadie, A. S., & Głowacz, A. (2019) · Applied Sciences · doi:10.3390/app9235093 · Cited by 25
A Current Signal-Based Adaptive Semisupervised Framework for Bearing Faults Diagnosis in Drivetrains
Li, J., Wang, Y., Zi, Y., Sun, X., & Yang, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3046051 · Cited by 24
Zamudio-Ramírez, I., Osornio-Rios, R. A., Daviu, J. A. A., Cureño-Osornio, J., & Saucedo-Dorantes, J. J. (2021) · Electronics · doi:10.3390/electronics10121486 · Cited by 24
“tively, some authors have proposed the study of current signals [3,6,19].”
BackgroundZhang, Q., Lv, Y., Yuan, R. B., Li, Z., & Li, H. (2022) · Measurement · doi:10.1016/j.measurement.2022.111973 · Cited by 24
Pietrowski, W., & Górny, K. (2020) · Energies · doi:10.3390/en13143626 · Cited by 24
“The most frequently used diagnostic signals include motor phase current waveforms, vibroacoustic signals, axial flux or supply voltage waveforms [21,22].”
MethodSelf-Tuning Observer for Sensor Fault-Tolerant Control of Induction Motor Drive
Kuchař, M., Palacký, P., Šimoník, P., & Strossa, J. (2021) · Energies · doi:10.3390/en14092564 · Cited by 25
Stability-based system for bearing fault early detection
Díaz, M., Henríquez, P., Ferrer, M. A., Pirlo, G., Alonso, J. B., Carmona-Duarte, C., & Impedovo, D. (2017) · Expert Systems with Applications · doi:10.1016/j.eswa.2017.02.030 · Cited by 23
Saïdi, L., Bechhoefer, E. R., Ali, J. B., & Benbouzid, M. (2015) · International Conference on Sciences and Techniques of Automatic Control and Computer Engineering · doi:10.1109/sta.2015.7505124 · Cited by 22
Nguyen, H. N., Kim, J., & Kim, J.-M. (2018) · Sensors · doi:10.3390/s18051389 · Cited by 23
“Envelope power analysis is the most effective technique for signal demodulation and hence the detection of defect frequencies associated with each type of localized bearing defect [15,16].”
MethodOptimal SES Selection Based on SVD and Its Application to Incipient Bearing Fault Diagnosis
Li, L., Cui, Y., Chen, R., & Liu, X. (2018) · Shock and Vibration · doi:10.1155/2018/8067416 · Cited by 22
Fault Detection of Rolling Bearing Using Sparse Representation-Based Adjacent Signal Difference
Sun, Y., & Yu, J. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3044336 · Cited by 26
“Spectral kurtosis (SK) [14]–[16] is able to adaptively search the suitable resonance frequency band in a signal.”
BackgroundFeature Engineering for Ball Bearing Combined-Fault Detection and Diagnostic
Khlaief, A., Nguyen, K. T. P., Medjaher, K., Picot, A., Maussion, P., Tobon, D., Chauchat, B., & Cheron, R. (2019) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2019.8864899 · Cited by 21
Guo, J., He, Q., Zhen, D., & Gu, F. (2023) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2023.3293840 · Cited by 21
“[16]adoptedspectralkurtosistodetect localbearingfaultsininductionmachines.”
PHM Survey : Implementation of Signal Processing Methods for Monitoring Bearings and Gearboxes
Soualhi, A., Hawwari, Y., Medjaher, K., Clerc, G., Razik, H., & Guillet, F. (2020) · International Journal of Prognostics and Health Management · doi:10.36001/ijphm.2018.v9i2.2736 · Cited by 21
“A novel framework was developed in Leite et al. (2015).”
MethodSong, X., Hu, J., Zhu, H., & Zhang, J. (2018) · IEEJ Transactions on Electrical and Electronic Engineering · doi:10.1002/tee.22595 · Cited by 21
Fournier, E., Picot, A., Régnier, J., Andrieux, C., Saint-Michel, J., & Maussion, P. (2015) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2015.7303699 · Cited by 21
Salomon, C. P., Sant’Ana, W. C., Lambert‐Torres, G., da Silva, L. B., Bonaldi, E. L., & de Oliveira, L. D. L. (2018) · Energies · doi:10.3390/en11040691 · Cited by 20
Self-citationCondition Monitoring of Bearing Faults Using the Stator Current and Shrinkage Methods
Duque-Pérez, Ó., Pozo-Gallego, C. D., Moríñigo-Sotelo, D., & Godoy, W. F. (2019) · Energies · doi:10.3390/en12173392 · Cited by 23
A Novel Rolling Bearing Vibration Impulsive Signals Detection Approach Based on Dictionary Learning
Sun, C., Yin, H., Li, Y., & Chai, Y. (2021) · IEEE/CAA Journal of Automatica Sinica · doi:10.1109/jas.2020.1003438 · Cited by 19
“According to [23], the periodic impulsive component is described as follows:”
BackgroundMethodInstantaneous-Angular-Speed-Based Synchronous Averaging Tool for Bearing Outer Race Fault Diagnosis
Chen, X., Guo, Y., & Na, J. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3192674 · Cited by 18
“Second, many characteristic indexes have been proposed in the fault diagnosis field, which provides more choices for the proposed frameworks to be suitable for different running conditions, such as Kurtogram [23], Sparse measure [24], Gini index [25], etc.”
BackgroundZhang, R., Chen, K., & Wang, H. (2022) · Measurement Science and Technology · doi:10.1088/1361-6501/ac93a2 · Cited by 18
“Among them, many diagnosis technologies, such as wavelet decomposition [3, 4], classical mode decomposition [5, 6], spectral kurtosis [7, 8], and sparse signal processing [9, 10], are based on the consideration of suppressing or canceling the noise embedded in fault signals to highlight fault characteristics.”
Dong, K., Xu, K., Wang, L., Zhang, C., Jin, F., & Song, J. (2023) · Nonlinear Dynamics · doi:10.1007/s11071-023-09001-9 · Cited by 18
Santer, P., Reinhard, J., Schindler, A., & Graichen, K. (2025) · Mechatronics · doi:10.1016/j.mechatronics.2025.103294 · Cited by 22
Żak, G., Wyłomańska, A., & Zimroz, R. (2018) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2018.2828787 · Cited by 18
“It is a basis for filtering procedure that can be done via multiple ways: kurtogram [19], spectral kurtosis based methods [20], filtering around mesh and resonance frequencies [21] or maximization of impulsivity in given frequency band [22]–[24].”
Methodde Mendonça, P. L., Bonaldi, E. L., de Oliveira, L. E. L., Lambert‐Torres, G., da Silva, J. G. B., da Silva, L. E. B., Salomon, C. P., Sant’Ana, W. C., & Shinohara, A. H. (2017) · Electric Power Systems Research · doi:10.1016/j.epsr.2017.04.007 · Cited by 17
Self-citationQiu, C., Wu, X., Xu, C., Qiu, X., & Xue, Z. (2020) · Sensors · doi:10.3390/s20061631 · Cited by 17
Estimation of Bearing Fault Severity in Line-Connected and Inverter-Fed Three-Phase Induction Motors
Godoy, W. F., Moríñigo-Sotelo, D., Duque-Pérez, Ó., da Silva, I. N., Goedtel, A., & Palácios, R. H. C. (2020) · Energies · doi:10.3390/en13133481 · Cited by 20
“In [1], the squared envelope spectrum analysis of the stator current, enhanced using spectral kurtosis algorithms, was performed to detect localized bearing faults.”
BackgroundMethodInfluentialSkóra, M., Ewert, P., & Kowalski, C. T. (2019) · Energies · doi:10.3390/en12214212 · Cited by 17
“Among others, spectral kurtosis (SK) [14], short-time Fourier transform (STFT) [15], higher order transforms such as bispectrum [16] and bicoherence [17], wavelet analysis [18,19] and methods of artificial intelligence [19,20] are used for quick and effective detection of bearing damage.”
MethodOTHMAN, M. (2016) · PRZEGLĄD ELEKTROTECHNICZNY · doi:10.15199/48.2016.11.51 · Cited by 16
“Furthermore, kurtosis also have been applied in Spectral Kurtosis analysis [9], [10], or also known as kurtogram method [11], [12] for detection of bearing fault in frequency domain.”
MethodBessous, N., Zouzou, S. E., & Chemsa, A. (2016) · International Conference on Control, Engineering & Information Technology · doi:10.1109/ceit.2016.7929085 · Cited by 16
Application of Naive Bayes Classifier Theorem in Detecting Induction Motor Bearing Failure
Pandarakone, S. E., Gunasekaran, S., Mizuno, Y., & Nakamura, H. (2018) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icelmach.2018.8506836 · Cited by 16
“[9] have carried out an experiment with the hole of diameter 2.”
MethodIntelligent Ball Bearing Fault Diagnosis Using Fractional Lorenz Chaos Extension Detection
Tian, A., Fu, C., Li, Y., & Yau, H. (2018) · Sensors · doi:10.3390/s18093069 · Cited by 17
Bearing fault identification of three-phase induction motors bases on two current sensor strategy
Lopes, T. D., Goedtel, A., Palácios, R. H. C., Godoy, W. F., & de Souza, R. M. (2016) · Soft Computing · doi:10.1007/s00500-016-2217-8 · Cited by 20
Cheng, W. D., Xu, X., Ding, Y., & Sun, K. (2020) · Review of Scientific Instruments · doi:10.1063/1.5143050 · Cited by 15
An Accurate Tool for Detecting Stator Inter-Turn Fault in LSPMSM
Maraaba, L. S., Al‐Hamouz, Z., & Abido, M. A. (2019) · IEEE Access · doi:10.1109/access.2019.2923812 · Cited by 15
“Among these indicators are the magnetic flux, vibration, stator current (a negative and zero sequence or a third harmonic component), zero-sequence component of the voltage, thermal image, instantaneous real and reactive power, phase shift between the stator current and supply voltage, and acoustic noise [10]–[17].”
BackgroundA Feature Extraction Method for Vibration Signal of Bearing Incipient Degradation
Huang, H., Ouyang, H., Gao, H., Guo, L., Li, D., & Wen, J. (2016) · Measurement Science Review · doi:10.1515/msr-2016-0018 · Cited by 14
“SK was firstly presented by Dwyer in 1983 [26]-[28], and several studies have shown that SK can be successfully used to identify transient impacts caused by faults of rolling bearings [29]-[30].”
BackgroundVan, M., Franciosa, P., & Ceglarek, D. J. (2016) · Mathematical Problems in Engineering · doi:10.1155/2016/9657285 · Cited by 15
“To effectively select the filtering frequency band, spectral kurtosis (SK) and its advanced methods [13, 14] have been developed.”
MethodBearing Fault Detection in Induction Machine Using Squared Envelope Analysis of Stator Current
Leite, V. C. M. N., da Silva, J. G. B., Lambert‐Torres, G., Veloso, G. F. C., da Silva, L. E. B., Bonaldi, E. L., & de Oliveira, L. E. D. L. (2017) · InTech eBooks · doi:10.5772/67145 · Cited by 19
“In this context, this work consists of applying a methodology for analyzing the electrical signature for the diagnosis of point defects in bearings induction motor, based on spectral kurtosis and squared envelope spectrum analysis, in order to increase the fault detection capability even in an incipient stage [14].”
BackgroundMethodInfluentialSelf-citationBessous, N., Chemsa, A., & Sbaa, S. (2018) · International Conference on Communications and Electrical Engineering (ICCEE) · doi:10.1109/ccee.2018.8634566 · Cited by 13
“It is considered one of many techniques used in diagnosis of rotating electrical machines [11-13].”
MethodImbalance fault detection of marine current turbine under condition of wave and turbulence
Zhang, M., Wang, T., Tang, T., Benbouzid, M., & Diallo, D. (2016) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2016.7793360 · Cited by 15
Modeling of Fault Frequencies for Distributed Damages in Bearing Raceways
Irfan, M. (2019) · Journal of Nondestructive Evaluation · doi:10.1007/s10921-019-0635-0 · Cited by 12
Moisture estimation in power transformer oil using acoustic signals and spectral kurtosis
Leite, V. C. M. N., Veloso, G. F. C., da Silva, L. E. B., Lambert‐Torres, G., da Silva, J. G. B., & Pinto, J. O. P. (2016) · Measurement Science and Technology · doi:10.1088/0957-0233/27/3/035301 · Cited by 12
Self-citationDynamic Analysis of a Rotor-Bearing-SFD System with the Bearing Inner Race Defect
Zhang, J., Lu, X., Lin, J., Ma, L., & Wang, J. (2017) · Shock and Vibration · doi:10.1155/2017/2489376 · Cited by 12
“According to research, over 40% failures are due to bearing defects among failures ofmotors [1].”
BackgroundAnalytical Model of Cage Induction Machine Dedicated to the Study of the Inner Race Bearing Fault
Hadjami, M., Razik, H., Oumaamar, M. E. K., & Kezzar, A. (2018) · International Journal of Electrical and Computer Engineering (IJECE) · doi:10.11591/ijece.v8i1.pp458-471 · Cited by 12
Yang, X., Guo, Y., & Fan, J. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3286281 · Cited by 11
“Spectral kurtosis is a classical algorithm to determine the demodulation frequency band [25], [26], which is widely used in bearing fault diagnosis.”
BackgroundDevelopment of a methodology for bearing fault scrutiny and diagnosis using SVM
Pandarakone, S. E., Akahori, K., Matsumura, T., Mizuno, Y., & Nakamura, H. (2017) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2017.7913097 · Cited by 14
“As a general case, in most of the paper, hole is formed in the bearing of the induction motor for carrying out the fault analysis [13-15].”
BackgroundA smart fault-detection approach with feature production and extraction processes
Li, S.-Y., & Gu, K.-R. (2019) · Information Sciences · doi:10.1016/j.ins.2019.11.010 · Cited by 11
Simultaneously Low Rank and Group Sparse Decomposition for Rolling Bearing Fault Diagnosis
Zheng, K. W., Bai, Y., Xiong, J., Tan, F., Yang, D., & Zhang, Y. (2020) · Sensors · doi:10.3390/s20195541 · Cited by 11
“The spectral kurtosis [13,14], the fast Kurtogram [15] and their improvements [16] are representatives among them.”
BackgroundWang, H., Chen, K., & Lin, L. (2021) · Measurement Science and Technology · doi:10.1088/1361-6501/ac29d3 · Cited by 11
“…should be addressed. noise to highlight the fault feature, such as empirical mode decomposition [3, 4], wavelet transform [5, 6], spectral kurtosis [7, 8], sparse signal processing [9, 10], is the most straightforward way to achieve the fault diagnosis under the strong-noise background.”
A TDF Model in Induction Machines for Loose Bearing Diagnosis by Neutral Voltage
Jafarian, M. J., & Nazarzadeh, J. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2950863 · Cited by 11
“In contrast, the distributed defects consist of surface waviness, roughness, and off-size rolling elements result in mechanical looseness and vibrations [4].”
BackgroundAher, H. R., & Ghuge, N. C. (2025) · Tribology and Materials · doi:10.46793/tribomat.2025.009 · Cited by 10
Kandukuri, S. T., Senanayaka, J. S. L., Huynh, V. K., Karimi, H. R., & Robbersmyr, K. G. (2017) · Proceedings of the Institution of Mechanical Engineers Part I Journal of Systems and Control Engineering · doi:10.1177/0959651817731259 · Cited by 10
“Further analysis based on the current spectrum may be necessary to reliably detect bearing faults based on current signature method.(35)”
MethodMohanty, S., Gupta, K. K., & Raju, K. S. (2017) · IET Science Measurement & Technology · doi:10.1049/iet-smt.2016.0409 · Cited by 10
Pandarakone, S. E., Masuko, M., Mizuno, Y., & Nakamura, H. (2018) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2018.8352212 · Cited by 11
“In most of the cases, hole inserted on the outer raceway of bearing is considered as the fault factor and failure analysis is performed [7-8].”
BackgroundExperimental detection of defects in variable speed fan bearing using stator current monitoring
Bouras, A., Bennedjai, S., & Bouras, S. (2020) · SN Applied Sciences · doi:10.1007/s42452-020-2687-2 · Cited by 10
Bessous, N. (2020) · International Conference on Communications, Control Systems and Signal Processing (CCSSP) · doi:10.1109/ccssp49278.2020.9151672 · Cited by 10
Ciszewski, T., Gelman, L., & Ball, A. D. (2020) · Electronics · doi:10.3390/electronics9101560 · Cited by 10
“Therefore, more effective second order data processing techniques are employed for fault identification of motor bearing by motor current signature analysis, as follows: the Park vector approach and the extended Park vector approach [13,21,23], the spectral entropy [1], a fuzzy feedback observer [2], deep learning tec…”
MethodShiri, H., Zimroz, P., Wodecki, J., Wyłomańska, A., & Zimroz, R. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110833 · Cited by 10
Meng, T., Jiang, X., Song, Q., Hu, Z., Guo, J., & Zhu, Z. (2024) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2024.3427751 · Cited by 9
“Many signal processing techniques are widely applied to extract such periodic shocks, such as time-domain analysis [4], frequency transform [5], time–frequency analysis [6], [7], spectral kurtosis [8], blind deconvolution [9], and deep learning [10], [11].”
MethodPérez‐Cruz, J., Puche‐Panadero, R., Pineda‐Sanchez, M., Riera‐Guasp, M., Martínez‐Román, J., & Sapena-Bañó, Á. (2017) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2017.8062390 · Cited by 11
“To alleviate this problem, instead of performing the spectral analysis of the current signal, other quantities such as field oriented control(FOC) current-related quantities [5], current residual vector [6], modal currents [7], the current envelope [8], or the squared current envelope [9] have been proposed for fault…”
Dubaish, A. A., & Jaber, A. A. (2023) · Engineering and Technology Journal · doi:10.30684/etj.2023.142462.1535 · Cited by 14
Barusu, M. R., Umamaheswari, S., & Meganathan, D. (2019) · Elektronika ir Elektrotechnika · doi:10.5755/j01.eie.25.1.22735 · Cited by 10
Wang, H., & Du, W. (2020) · Complexity · doi:10.1155/2020/9857839 · Cited by 9
“Spectral kurtosis and envelope were combined for detection of the localized bearing faults in induction machines successfully [13].”
BackgroundGong, T., Yuan, X., Lei, X., Yuan, Y., & Zhang, B. (2018) · Measurement · doi:10.1016/j.measurement.2018.05.082 · Cited by 9
Arc fault detection in aircraft AC power systems using coefficient of variation
Qu, H., Dai, H., Wang, X., Zhang, Y., Ren, W., & Li, J. (2025) · Electric Power Systems Research · doi:10.1016/j.epsr.2025.111974 · Cited by 8
Jonjo, E. R., Ali, I., Megahed, T. F., & Nassef, M. G. A. (2025) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-025-01972-w · Cited by 8
“…signal processing methodologies that are traditionally employed in vibration analysis have also been adapted for current signal processing including but not limited to, cepstrum analysis [24], envelope detection [25], Wavelet Transform analysis [26, 27] and Short-Time Fourier Transform (STFT) [28].”
He, X., Liu, X., Lin, C., Fu, M., Wang, J.-J., & Zhang, J. (2025) · Italian National Conference on Sensors · doi:10.3390/s25154591 · Cited by 8
“Statistics indicate that over 40% of motor failures are attributed to bearing faults [1], which directly affect the equipment performance and operational reliability.”
Wang, J., Chen, Y., Liu, K., Zhu, Z. Q., Wei, D., Zhou, S., Li, K., & Luan, H. (2024) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2024.3386721 · Cited by 9
Bazan, G. H., Goedtel, A., Castoldi, M. F., Godoy, W. F., Duque-Pérez, Ó., & Moríñigo-Sotelo, D. (2020) · Applied Sciences · doi:10.3390/app11010314 · Cited by 8
“Generally, bearing failures are related to contamination, corrosion, inappropriate lubrication, and installation problems [2].”
BackgroundInfluentialHilbert Marginal Spectrum for Failure Mode Diagnosis of Rotating Machines
Chelmiah, E. T., & Kavanagh, D. F. (2021) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon48115.2021.9589472 · Cited by 9
“[15], Wavelet Transform (WT) [16], Spectral Kurtosis (SK) [17], and the Hilbert-Huang Transform (HHT) [18], [19].”
BackgroundBai, X.-S., Song, X.-J., Wang, Z.-W., Chen, Q., Zhao, W.-X., & Fan, W.-M. (2025) · Measurement science and technology · doi:10.1088/1361-6501/adb066 · Cited by 4
“Traditional diagnostic techniques such as envelope analysis [3], spectral kurtosis [4], and deconvolution [5] have been instrumental in isolating and interpreting these fault characteristics.”
Xi, W., Qiao, F.-Y., & Zhang, J. (2025) · PLoS ONE · doi:10.1371/journal.pone.0324739 · Cited by 7
Burriel-Valencia, J., Puche‐Panadero, R., Martínez‐Román, J., Sapena-Bañó, Á., & Pineda‐Sanchez, M. (2019) · Sensors · doi:10.3390/s19163471 · Cited by 7
“A proven approach is to use the same current acquired in MCSA, but replacing its spectral analysis by the spectral analysis of the current envelope [17], or the squared current [18].”
MethodA Bi-Level Nested Sparse Optimization for Adaptive Mechanical Fault Feature Detection
Zhang, H., Chen, X., Zhang, X., & Zhang, X. (2020) · IEEE Access · doi:10.1109/access.2020.2968726 · Cited by 7
“transform (WT) [10], spectrum kurtosis(SK) [11], adaptive”
BackgroundYang, Z., Wu, J., Lu, C., & Wang, D. (2020) · Transactions of the Institute of Measurement and Control · doi:10.1177/0142331220944076 · Cited by 7
“Induction motors are widely used in the fields of agricultural production and machinery manufacturing (Leite et al., 2015), due to their low price, simple structure (Lim et al., 2014) and convenient maintenance.”
BackgroundJiang, Q., Chang, F., & Liu, C. (2021) · Journal of Electrical Engineering and Technology · doi:10.1007/s42835-021-00704-w · Cited by 8
Motor Bearing Fault Diagnosis based on Hilbert-Huang transform and Convolutional Neural Networks
Du, D., Zhang, J., Fang, Y., & Tian, J. (2022) · IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific) · doi:10.1109/itecasia-pacific56316.2022.9941910 · Cited by 7
“According to statistic data, about 40% of motor failures are caused by bearing failures [1].”
BackgroundA Wind Turbine Bearing Fault Detection Method Based on Improved CEEMDAN and AR-MEDA
Djemili, I., Medoued, A., & Soufı, Y. (2023) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-023-01117-x · Cited by 7
“…is a way to achieve discrete signal separation, a deterministic (discrete) signal is predicted using the AR model, the residual part also called prewhitened signal which contains stationary white noise and impulses is then obtained by subtracting the predicted signal from actual signal [28, 33].”
Effects of the Slot Harmonics on the Stator Current in an Induction Motor with Bearing Fault
Song, X., Hu, J., Zhu, H., & Zhang, J. (2017) · Mathematical Problems in Engineering · doi:10.1155/2017/2640796 · Cited by 7
“Moreover, stator current signals are often previously measured for control purposes in the drive system and can be analyzed remotely and online [9, 11].”
BackgroundAutomatic fault diagnosis in PMSM using adaptive filtering and wavelet transform
Heydarzadeh, M., Zafarani, M., Akin, B., & Nourani, M. (2017) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2017.8002381 · Cited by 7
Yapay Sinir Ağlarıyla Asenkron Motor Çoklu Arızalarının Tespiti ve Sınıflandırılması
Kaya, K., & Ünsal, A. (2021) · Journal of Polytechnic · doi:10.2339/politeknik.933826 · Cited by 8
Barcelos, A. D. S., Mazzoni, F. M., & Cardoso, A. J. M. (2021) · Journal of Control Automation and Electrical Systems · doi:10.1007/s40313-021-00780-3 · Cited by 7
Leite, V. C. M. N., da Silva, J. G. B., da Silva, L. E. B., Veloso, G. F. C., Lambert‐Torres, G., Bonaldi, E. L., & de Oliveira, L. E. L. (2016) · Electric Power Components and Systems · doi:10.1080/15325008.2016.1209705 · Cited by 7
“because the SK uses fourth-order rather than second-order statistics [2].”
BackgroundMethodSelf-citationTime‐Frequency Domain Analysis
Nandi, A. K., & Ahmed, H. (2019) · Wiley eBooks · doi:10.1002/9781119544678.ch5 · Cited by 8
Time-Series Feature Extraction by Return Map Analysis and Its Application to Bearing-Fault Detection
Ponomareva, V., Druzhina, O. S., Logunov, O. Y., Rudnitskaya, A., Bobrova, Y. O., Andreev, V. S., & Искандарович, К. Т. (2024) · Big Data and Cognitive Computing · doi:10.3390/bdcc8080082 · Cited by 6
Sun, Q., Zhu, J., & Chen, C. (2024) · Sensors · doi:10.3390/s24237675 · Cited by 8
“Mechanical imbalance in induction motors can lead to the disturbance magnitude of the stator current [26].”
Wang, H., Du, W., Li, H., Li, Z., & Hu, J. (2021) · Journal of Vibration and Control · doi:10.1177/10775463211050726 · Cited by 6
Review of spectrum analysis in fault diagnosis for mechanical equipment
Wang, Z., Wang, J., & Sun, Y. (2023) · Engineering Research Express · doi:10.1088/2631-8695/acfae2 · Cited by 9
Integrated Fault Evaluation Through Fusion Algorithm Supported by Kalman Filter
Mousavi, S., Bayram, D., & Seker, S. S. (2020) · Traitement du signal · doi:10.18280/ts.370610 · Cited by 6
“Bearing faults is the most common fault in EMs, which can be detected easily either by the electrical or vibration signals [25-27].”
BackgroundFedele, E., Campagna, N., Bossi, G., Noia, L. P. D., Miceli, R., & Damiano, A. (2024) · Global Power, Energy and Communication Conference · doi:10.1109/gpecom61896.2024.10582677 · Cited by 5
Wang, J., Chen, Y., Liu, K., Wei, D., Zhou, S., Chen, J., Li, K., Luan, H., & Cai, H. (2024) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2024.3428646 · Cited by 7
“Leite et al. [28] successfully apply SK and envelope spectrum analysis (ESA) to extract bearing fault features from machine stator currents.”
Na, K., Kim, K., Yoo, J., Lee, J., & Youn, B. D. (2024) · Expert Systems with Applications · doi:10.1016/j.eswa.2024.126110 · Cited by 5
Metadata
- Authors
- Leite, V. C. M. N., Borges da Silva, J. G., Veloso, G. F. C., Borges da Silva, L. E., Lambert-Torres, G., Bonaldi, E. L., & de Lacerda de Oliveira, L. E.
- Affiliations
- Department of Aerospace Science and Technology (BR)
- Universidade Federal de Itajubá (BR)
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-03
- Volume
- 62
- Issue
- 3
- Pages
- 1855-1865
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W1993880634
- Cited by
- 274
- References
- 43
- Citations by year
- 2026: 5 · 2025: 15 · 2024: 21 · 2023: 21 · 2022: 23 · 2021: 32 · 2020: 29 · 2019: 33 · 2018: 33 · 2017: 26 · 2016: 21 · 2015: 14
- FWCI
- 23.05
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Industrial Electronics (publishedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrical Fault Detection and Protection
- Keywords
- bearing fault detection, induction motor, stator current, spectral kurtosis, envelope analysis, fast kurtogram, condition monitoring, fault location
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.