Detection of Localized Bearing Faults in Induction Machines by Spectral Kurtosis and Envelope Analysis of Stator Current
The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Abstract
Early detection of faults in electrical machines, particularly in induction motors, has become necessary and critical in reducing costs by avoiding unexpected and unnecessary maintenance and outages in industrial applications. Additionally, most of these faults are due to problems in bearings. Thus, in this paper, experimental bearing fault detection of a three-phase induction motor is performed by analyzing the squared envelope spectrum of the stator current. Spectral kurtosis-based algorithms, namely, the fast kurtogram and the wavelet kurtogram, are also applied to improve the envelope analysis. Experimental tests are performed, considering outer bearing faults at different stages, and the results are promising.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Envelope analysis also was applied by Leite et al. [85] to detect the bearing fault in induction motor, and the proposed method can efficiently detect fault without any information regarding the model.”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [85]
Citations
Cites
Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review
Nandi, S., Toliyat, H. A., & Li, X. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847955 · Cited by 2,382 · cited 1×
“In this case, the exact location of the defect is expressed by its characteristic frequency whose value can be predicted based on the rolling element bearing geometry, number of balls, and shaft speed [9], [22].”
BackgroundFast computation of the kurtogram for the detection of transient faults
Antoni, J. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.12.002 · Cited by 1,601 · cited 3×
“width in an efficient and computationally feasible way [31].”
BackgroundMethodThe spectral kurtosis: a useful tool for characterising non-stationary signals
Antoni, J. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.09.001 · Cited by 1,441 · cited 3×
“In this way, a time–frequency decomposition based on STFT is performed, and the kurtosis is computed in the time direction for each frequency line [11], [38].”
BackgroundMethodAdvances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140 · cited 3×
“In addition, the SNR can significantly vary in industrial applications [2].”
BackgroundVibration‐based Condition Monitoring: Industrial, Aerospace and Automotive Applications
Randall, R. B. (2011) · Wiley eBooks · doi:10.1002/9780470977668 · Cited by 868 · cited 10×
“In most cases, defects in the bearings are associated with contamination, corrosion, inadequate lubrication, and installation problems such as misalignment and overloading [1], [8]–[11].”
BackgroundMethodInfluentialMotor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartfield, R. G. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475697 · Cited by 761
Barszcz, T., & JabŁoński, A. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.05.018 · Cited by 640 · cited 10×
“digital signal processing methods [11], [30].”
BackgroundMethodInfluentialMotor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartheld, R. G. (2002) · Proceedings of 1994 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.1994.345491 · Cited by 638 · cited 4×
“Here, artificially produced defects are introduced in the bearing outer race to simulate a localized fault, allowing the evaluation of the applied methodology and a critical comparison with other well-known techniques [13], [15], [22], [33], [43].”
BackgroundMethodResultInfluentialReport of Large Motor Reliability Survey of Industrial and Commercial Installations, Part I
(1985) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1985.349532 · Cited by 602
Models for Bearing Damage Detection in Induction Motors Using Stator Current Monitoring
Blodt, M., Granjon, P., Raison, B., & Rostaing, G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.917108 · Cited by 568
Research works printed but not linked: 1
- sawalhi, 2007, Diagnostics prognostics and fault simulation for rolling element bearings
Cited by
Items 201–274 of 274
The use of spectral kurtosis as a trend parameter for bearing faults diagnosis
Saïdi, L., Ali, J. B., & Fnaiech, F. (2014) · International Conference on Sciences and Techniques of Automatic Control and Computer Engineering · doi:10.1109/sta.2014.7086734 · Cited by 5
“The employed methodology has been successfully used for vibration signal analysis and SK based algorithms to enhance the envelope analysis performance [14], [15].”
MethodIncipient fault diagnosis of rolling bearing using accumulative component kurtosis in SVD process
Cui, Y., Li, L., Chen, R., Liu, X., & Cao, Y. (2018) · Journal of Vibroengineering · doi:10.21595/jve.2018.19181 · Cited by 5
“Addressing the fault feature extraction, different to the traditional analysis method such as time-domain statistics index, FFT analysis, the advanced and effective strategies have been proposed in the past decades, including Wavelet Transform (WT) [5-7], spectral kurtosis [8, 9], empirical mode decomposition (EMD) [1…”
MethodLi, X., He, J., Cheng, Y., & Zhao, Y. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/563/3/032054 · Cited by 5
Online Condition Monitoring of Traction Motor
Samanta, A. K., Naha, A., Basu, D., Routray, A., & Deb, A. K. (2016) · Advances in civil and industrial engineering book series · doi:10.4018/978-1-5225-0084-1.ch020 · Cited by 5
Aher, H. R., & Ghuge, N. C. (2025) · Progress in Engineering Science · doi:10.1016/j.pes.2025.100117 · Cited by 4
A framework for process anomaly detection in 3D concrete printing
Kamhawi, A., Lin, Y., Watson, C., Barton, K. L., & Meibodi, M. A. (2025) · Additive manufacturing · doi:10.1016/j.addma.2025.105056 · Cited by 6
Agustin, X. M., Samson, E. J., & Ostia, C. F. (2023) · IEEE Control and System Graduate Research Colloquium (ICSGRC) · doi:10.1109/icsgrc57744.2023.10215397 · Cited by 4
“In numerous analyses, holes and cuts have been a factor in bearing failures [4].”
BackgroundDíaz-Saldaña, G., Cureño-Osornio, J., Zamudio-Ramírez, I., Osornio-Rios, R. A., Dunai, L., Sava, L., & Daviu, J. A. A. (2024) · Applied Sciences · doi:10.3390/app14125310 · Cited by 4
“To study the OR defects, holes with a 1 mm, 3 mm, and 5 mm diameter were drilled, simulating pitting [40] as a standard method to induce this kind of fault [9,11,41,42].”
MethodAbout the cumulants of periodic signals
Barrau, A., & Badaoui, M. E. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.06.019 · Cited by 4
Kim, W., Lee, M., Park, S.-J., Jang, S.-H., Kang, B.-S., Kim, N., & Hong, Y. (2022) · Energies · doi:10.3390/en15155510 · Cited by 4
Khan, S. I. (2019) · International Journal of Advanced Trends in Computer Science and Engineering · doi:10.30534/ijatcse/2019/81832019 · Cited by 4
Yang, Q., Dong, K., Song, J., Jin, F., Mo, W., & Hui, Y. (2021) · IEEE International Conference on Communication Software and Networks · doi:10.1109/iccsn52437.2021.9463633 · Cited by 6
“Thus, there is a great demand and wide use of weak sinusoidal signal detection [1], [2].”
BackgroundModal Decomposition for Bearing Fault Detection
Amirat, Y., Elbouchikhi, E., Delpha, C., Benbouzid, M., & Diallo, D. (2020) · Wiley eBooks · doi:10.1002/9781119720317.ch4 · Cited by 4
Ding, S., Wang, X., Li, Y., Wu, Z., & Hang, J. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3580750 · Cited by 7
“It is worth noting that, kurtosis is sensitive to data spikes in signals [28], [29], [30], especially when they occur early in faults, where they show a significant increase.”
Kılınç, O., & Vágner, J. (2016) · Vibroengineering PROCEDIA · doi:10.21595/vp.2016.17430 · Cited by 3
“4 includes autoregressive (AR) filtering [13] with a window size of 50 for pre-whitening the signal before MOMEDA method is applied to increase its efficiency by means of fault detection of 5 segmented signals.”
MethodEarly damage detection in planetary gear transmission in different operating conditions
Mbarek, A., Fernández, A., Hammami, A., Chaari, F., Viadero, F., & Haddar, M. (2022) · Forschung im Ingenieurwesen · doi:10.1007/s10010-022-00597-9 · Cited by 3
Bearing fault detection in adjustable speed drives via self-organized operational neural networks
Kilickaya, S., & Eren, L. (2024) · Electrical Engineering · doi:10.1007/s00202-024-02764-3 · Cited by 5
AI-Based Speed Adaptive Fault Diagnosis in Induction Motors Using Vibration Signal
Atif, M., Khan, F., Azmat, S., & Bibi, A. (2024) · International Conference on Frontiers of Information Technology (FIT) · doi:10.1109/fit63703.2024.10838415 · Cited by 6
Saucedo-Dorantes, J. J., Delgado-Prieto, M., Osornio-Rios, R. A., & Romero-Troncoso, R. D. J. (2019) · Mechanisms and machine science · doi:10.1007/978-3-030-13317-7_8 · Cited by 3
Azizi, B., Shakarami, M. R., Dalvand, F., Dalvand, S., & Khorsandi, A. (2018) · doi:10.1109/iceee2.2018.8391379 · Cited by 3
“In [10], for BFD purpose, squared envelope analysis and two spectral kurtosis-based algorithms, namely, fast kurtogram and wavelet kurtogram, are used in the motor”
BackgroundMethodWu, J., Yang, Z., Sun, X., & Wang, D. (2021) · Engineering Computations · doi:10.1108/ec-09-2020-0540 · Cited by 3
de Mendonça, P. L., Bonaldi, E. L., de Oliveira, L. E. D. L., Lambert‐Torres, G., da Silva, J. G. B., da Silva, L. E. B., Salomon, C. P., & Sant’Ana, W. C. (2015) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2015.7303725 · Cited by 3
Self-citationStart-up transient current analysis for Squirrel Cage Induction Motor
Khandelwal, N., Pareek, P., & Kapoor, S. R. (2016) · IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems · doi:10.1109/icpeices.2016.7853261 · Cited by 5
Garcia-Calva, T. A., Moríñigo-Sotelo, D., García-Pérez, A., & Romero-Troncoso, R. D. J. (2022) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icem51905.2022.9910769 · Cited by 3
“Several techniques based on the frequency-domain analysis have been developed and used in industrial systems for detecting faultsignatures in the spectrum of the measured signals [12]–[14].”
MethodOptimal weighted envelope spectrum with informative multi-band selection for bearing fault diagnosis
He, Y., Zhao, X., Liu, D., & Cui, L. (2026) · ISA Transactions · doi:10.1016/j.isatra.2026.06.006 · Cited by 2
Feature Engineering and Health Indicator Construction for Fault Detection and Diagnostic
Nguyen, K. T. P. (2021) · Springer series in reliability engineering · doi:10.1007/978-3-030-83819-5_10 · Cited by 3
Li, F., He, Z., Zhang, L., Ming, A., & Yang, Y. (2021) · Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University · doi:10.1051/jnwpu/20213940831 · Cited by 2
Nguyen, C. D., Nasir, F. E., Khan, S. A., Khan, S. A., & Kim, J.-M. (2023) · International Conference on Robotics and Automation in Industry (ICRAI) · doi:10.1109/icrai57502.2023.10089574 · Cited by 2
Multi-Scale Feature Learning Network for Bearing fault Diagnosis with Information Fusion
Luo, S., & Zhou, Q. (2024) · International Conference on Control, Automation and Robotics (ICCAR) · doi:10.1109/iccar61844.2024.10569627 · Cited by 2
“Its representative methods include wavelet transform [3], spectral kurtosis [4], empirical modal decomposition [5], etc.”
MethodWang, J., Liu, K., Wei, D., Chen, Y., Chen, J., Li, R., Luan, H., Li, K., & Zhou, S. (2024) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2024.3486009 · Cited by 2
“Currently, some noise cancellation-based methods, such as Wiener filter [18], linear prediction (LP) [19], time-shifting (TS) [20] and spectral kurtosis (SK) [21], [22], are successfully applied to eliminate inherent components of stator currents and extract fault features forbearingfaultdiagnosis.”
Outer Race Fault Diagnosis by Comparison between the Power Spectral Density and the Kurtogram
Khodja, M.-E.-A., Boudinar, A. H., Aimer, A. F., & Bendiabdellah, A. (2019) · International Aegean Conference on Electrical Machines and Power Electronics & International Conference on Optimization of Electrical and Electronic Equipment (ACEMP-OPTIM) · doi:10.1109/acemp-optim44294.2019.9007138 · Cited by 3
“On the other hand, the analysis of the stator current does not give satisfactory results according to Leite [21].”
MethodResultRemaining useful life of bearings based on temporal features and support vector regression
Abdallah, F., Medoued, A., Mennai, N., & Soufı, Y. (2022) · International Multi-Conference on Systems, Signals & Devices (SSD) · doi:10.1109/ssd54932.2022.9955707 · Cited by 2
“to detect localized bearing faults [4].”
Load management applied to intelligent automation of refrigerators
Zamboni, L., Lafalce, T. L., de Moraes, C. H. V., Lambert‐Torres, G., Moana, F., & Lima, J. D. (2015) · IEEE PES Innovative Smart Grid Technologies Conference - Latin America (ISGT Latin America) · doi:10.1109/isgt-la.2015.7381265 · Cited by 2
Self-citationSparsity-aware tight frame learning for rotary machine fault diagnosis
Zhang, H., Chen, X., Du, Z., Ma, M., & Zhang, X. (2016) · IEEE International Instrumentation and Measurement Technology Conference · doi:10.1109/i2mtc.2016.7520471 · Cited by 2
“Thus many advanced signal processing techniques have been widely studied, such as short-time Fourier transform [3], wavelet transform (WT) [4], empirical mode decomposition (EMD) [5], spectral kurtosis (SK) [6] and morphology filtering [7].”
MethodMechanical Fault Diagnosis Technology of Wind Turbine Transmission System Based on Image Features
Li, L., Wang, W., Cai, A., Li, H., Zhang, L., & Liu, P. (2022) · Mobile Information Systems · doi:10.1155/2022/5344652 · Cited by 2
“For condition-based maintenance of gear transmission systems, reliable identication of fault types and assessment of fault severity are required as well as diagnosis of mechanical faults of wind power transmission through image feature extraction [7, 8].”
BackgroundFu, M., Du, D., Leng, F., Tian, J., Fang, Y., & Zhang, J. (2023) · IEEE Student Conference on Electric Machines and Systems (SCEMS) · doi:10.1109/scems60579.2023.10379246 · Cited by 2
“According to statistics, about 41% of common motor faults are caused by bearing failures [1].”
BackgroundNguyen, T.-K., Ahmad, Z., & Kim, J.-M. (2022) · Communications in computer and information science · doi:10.1007/978-981-19-8069-5_41 · Cited by 1
Wodecki, J., Michalak, A., Hebda-Sobkowicz, J., Wyłomańska, A., Szabat, K., Wolkiewicz, M., Pawlak, M., & Zimroz, R. (2025) · Mechanical sciences · doi:10.5194/ms-16-597-2025 · Cited by 3
Neural Networks for Synchronous Generator Fault Diagnosis
Nashee, A. F., & Herez, A. H. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/518/4/042015 · Cited by 1
A Study of Electric Current Signal Analysis for Motor Bearing Condition Diagnosis
He, Y., Feng, K., Huang, B., Shen, G., Shi, D., Gu, F., & Ball, A. D. (2023) · Mechanisms and machine science · doi:10.1007/978-3-031-26193-0_14 · Cited by 1
Ahmad, W., Khan, S. A., Islam, M. M. M., & Kim, J.-M. (2017) · PHM Society Asia-Pacific Conference · doi:10.36001/phmap.2017.v1i1.1775 · Cited by 1
Classification of Bearing Faults by Approximation of Peak-To-Peak Amplitudes Distribution
Искандарович, К. Т., Logunov, O. Y., Druzhina, O. S., Kolev, G. Y., Kopets, E. E., & Kaplun, D. (2024) · Lecture notes in networks and systems · doi:10.1007/978-981-97-3604-1_1 · Cited by 1
Motor Bearing Fault Diagnosis Based on Improved VMD Algorithm
Kan, C., & Zhao, Y. (2024) · Lecture notes in electrical engineering · doi:10.1007/978-981-97-8812-5_9 · Cited by 1
Recursive Variational Mode Transform for Weak Fault Feature Recognition in Rotor-Bearing Systems
Fu, L., Qu, M., Ma, Z., Xiang, J., Tan, D., & Xu, F. (2025) · IEEE Sensors Journal · doi:10.1109/jsen.2025.3571541 · Cited by 1
“Core methods include spectral kurtosis [9], deconvolution [10], and envelope analysis [11].”
An Effective Envelope Analysis Using Gaussian Windows for Evaluation of Fault Severity in Bearing
Hung, N. N., Kim, J., & Kim, J.-M. (2018) · Lecture notes in electrical engineering · doi:10.1007/978-981-13-1056-0_46 · Cited by 1
Invasive Methods to Diagnose Stator Winding and Bearing Defects of an Induction Motors
Sheikh, M. A., Saad, N. B., Nor, N. M., Bakhsh, S. T., & Irfan, M. (2018) · Advances in computer and electrical engineering book series · doi:10.4018/978-1-5225-6989-3.ch006 · Cited by 1
Mechanical Vibration Analysis of Induction Machine Based on MEMS Sensor
Chen, J., Wang, J., & Zhou, T. (2019) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/252/3/032216 · Cited by 1
Liu, F., Li, X., Huang, K., Xiang, J., Chen, W., Xiao, Y., Mao, H., & Huang, Z. (2021) · IEEE Access · doi:10.1109/access.2021.3097443 · Cited by 1
“, cracks, pitting corrosion), which will lead to a series of transient impacts [6].”
BackgroundPlazenet, T. (2019) · doi:10.70675/e7f9ae06zc50az49cezb59dz59e075ab8e80 · Cited by 1
“Le kurtosis spectral a largement été utilisé dans la détection et le monitoring du défaut de roulement localisé (e.g. Antoni & Randall (2006); Leite et al. (2015); Saidi et al. (2015); Xiang et al. (2015)).”
BackgroundAPLICAÇÃO DE FFT PARA A DETECÇÃO DE DEFEITOS EM MÁQUINAS ELÉTRICAS
Bonaldi, E. L., de Oliveira, L. E. D. L., Lambert‐Torres, G., da Silva, J. G. B., da Silva, L. E. B., Ribeiro, M., & Venceslau, A. (2015) · Congresso Nacional de Matemática Aplicada à Indústria (CNMAI) · doi:10.5151/mathpro-cnmai-0111
Self-citationClassification of Faults in DTC Induction Machine using Wavelet Decomposition Method
Govindamoorthi, P., & Valarmathi, K. (2015) · Indian Journal of Science and Technology · doi:10.17485/ijst/2015/v8i26/81051
Advanced Power Loss Modeling and Model-Based Control of Three-Phase Induction Motor Drive Systems
Liu, Y. (2017) · OpenCommons at University of Connecticut (University of Connecticut)
Integrated Health Management System Approach: Application to Shipboard Rotating Machinery
Mayfield, E. W., Niu, G., Zhang, B., Ziehl, P. H., & Golda, E. M. (2018) · Annual Conference of the PHM Society · doi:10.36001/phmconf.2018.v10i1.552
Gear Fault Feature Extraction Based on OMP and K-SVD
Zou, J., Qin, Y., & Zhang, A. (2018) · Prognostics and System Health Management Conference · doi:10.1109/phm-chongqing.2018.00233
Bazan, G. H., Goedtel, A., Durand, F. R., & Godoy, W. F. (2019) · Anais do 14º Simpósio Brasileiro de Automação Inteligente · doi:10.17648/sbai-2019-111410
“Geralmente, as falhas nos rolamentos estão relacionadas a contaminação, corrosão, lubrificação inapropriada e problemas de instalação (Leite et al., 2015).”
BackgroundInfluentialThe signal demodulation techniques
Amirat, Y., & Benbouzid, M. (2020) · Institution of Engineering and Technology eBooks · doi:10.1049/pbpo153e_ch2
Caballero, J., & García, J. R. (2021) · DYNA · doi:10.15446/dyna.v88n216.88851
de Souza, W. G., de Castro, B. A., Lucas, G. B., Rocha, M. A., & Andreoli, A. L. (2021) · IEEE International Conference on Industry Applications · doi:10.1109/induscon51756.2021.9529639
“Dentre as falhas mecânicas, diversos trabalhos destacam que os danos nos rolamentos representam cerca de 40 a 50 % do total de danos [3, 4].”
BackgroundResearch on Fault Characteristic Variables of Asynchronous Motor Powered by Frequency Converter
Chen, M., & Xu, G. (2021) · International Conference on Power and Renewable Energy (ICPRE) · doi:10.1109/icpre52634.2021.9635323
Understanding the Fundamentals of Motor Current Signature AnalysisPreprint
Shirley, M., CHAMPNEYS, A. R., Marrin, N., Moore, M., Piette, B. M. A. G., & Shaw, A. D. (2022) · doi:10.33774/miir-2022-7kbv8
Barcelos, A. D. S., Mazzoni, F. M., & Cardoso, A. J. M. (2021) · Anais do ... Simpósio Brasileiro de Automação Inteligente/Simpósio Brasileiro de Automação Inteligente · doi:10.20906/sbai.v1i1.2578
Time Synchronization and Integration of Bearing Fault Impacts upon Stator Currents
Kalantar, A., Safizadeh, M. S., & Dalvand, F. (2023) · Electric Power Components and Systems · doi:10.1080/15325008.2023.2209084
Improved LeNet-5 Network for Equipment Fault Diagnosis of Ultra-supercritical Units
Zhang, X., Wei, C., & Zhang, C. (2023) · IEEE Data Driven Control and Learning Systems Conference (DDCLS) · doi:10.1109/ddcls58216.2023.10165863
“With the development of industrial big data, a large amount of operational data will be generated in real time in the process of electric power production [4], and the traditional methods can no longer meet the requirements of equipment fault diagnosis of electric power production process in the context of industrial…”
BackgroundApplication of Impulse Demodulation Analysis in the Abnormal Noise Fault Diagnosis of Robot Joint
Zhou, J., Yao, C., Sun, L., Wu, W., Wang, J., & Ji, C. (2023) · Global Reliability and Prognostics and Health Management Conference (PHM) · doi:10.1109/phm-hangzhou58797.2023.10482718
Sparse Model-Driven Deep Learning for Weak Fault Diagnosis of Rolling Bearings
Wen, G., Lei, Z., Chen, X., & Huang, X. (2024) · Smart sensors, measurement and instrumentation · doi:10.1007/978-981-97-1176-5_2
Bearing diagnostics based on spectral kurtosis
Kamiel, B. P., & Sunardi, S. (2024) · AIP conference proceedings · doi:10.1063/5.0240220
Classic and advanced sparsity-measures-based signal processing methods
Wang, D., & Hou, B. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-33486-3.00004-0
Reliability Modeling and Estimation for Electromechanical System Under Periodic Varying Loads
Yin, H., Zhang, L., Wang, J., & Bai, G. (2024) · Global Reliability and Prognostics and Health Management Conference (PHM) · doi:10.1109/phm-beijing63284.2024.10874809
Induction Motor Bearing Fault Diagnosis Using Taylor-Fourier Filters on Stray Flux Signals
Aguayo-Tapia, S., Avalos-Almazan, G., Rangel‐Magdaleno, J., Daviu, J. A. A., Ruiz-Sarrio, J. E., & Dunai, L. (2025) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie62713.2025.11124643 · Cited by 1
“Then, based on this equation, kurtosis K is calculated as: It is worth mentioning that kurtosis assessment has been successfully used before to detect faults [6], [9], [18].”
Nascimento, A. D. A. R., Moreira, J. D. S., Zaparoli, I. O., & Junior, J. A. T. (2025) · Revista de Gestão e Secretariado (Management and Administrative Professional Review) · doi:10.7769/gesec.v16i12.5447
IoT Based Low-Cost Smart EV Motor Fault Detection Using ESP32
Mr. Ameya Nitin Chavan, P. C. J. (2026) · International Journal of Advanced Research in Science Communication and Technology · doi:10.48175/ijarsct-31447
Song, X., Wang, Y., Xu, K., Wang, Z., Zhao, W., & Chen, Q. (2026) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2026.3693395
“In [19], a spectral kurtosis-based algorithm was applied to identify the optimal bandpass filter parameters to highlight the fault impact components.”
Nagendra, K., Doddamani, M. R., Bekinal, S. I., & Powar, S. (2026) · IEEE Access · doi:10.1109/access.2026.3718468
“Concurrently, non-invasive condition monitoring methods, such as the envelope analysis of stator currents, have emerged to accurately detect localized faults without relying on direct vibration measurements [29].”
Hamouda, S., Amirat, Y., Hamdani, S., & Khelfi, H. (2026) · Applied Sciences · doi:10.3390/app16168213
Metadata
- Authors
- Leite, V. C. M. N., Borges da Silva, J. G., Veloso, G. F. C., Borges da Silva, L. E., Lambert-Torres, G., Bonaldi, E. L., & de Lacerda de Oliveira, L. E.
- Affiliations
- Department of Aerospace Science and Technology (BR)
- Universidade Federal de Itajubá (BR)
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-03
- Volume
- 62
- Issue
- 3
- Pages
- 1855-1865
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W1993880634
- Cited by
- 274
- References
- 43
- Citations by year
- 2026: 5 · 2025: 15 · 2024: 21 · 2023: 21 · 2022: 23 · 2021: 32 · 2020: 29 · 2019: 33 · 2018: 33 · 2017: 26 · 2016: 21 · 2015: 14
- FWCI
- 23.05
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Industrial Electronics (publishedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrical Fault Detection and Protection
- Keywords
- bearing fault detection, induction motor, stator current, spectral kurtosis, envelope analysis, fast kurtogram, condition monitoring, fault location
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.