The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Improved PLS Focused on Key-Performance-Indicator-Related Fault Diagnosis
Abstract
Standard partial least squares (PLS) serves as a powerful tool for key performance indicator (KPI) monitoring in large-scale process industry for last two decades. However, the standard approach and its recent modifications still encounter some problems for fault diagnosis related to KPI of the underlying process. To cope with these difficulties, an improved PLS (IPLS) approach is presented in this paper. IPLS is able to decompose the measurable process variables into the KPI-related and unrelated parts, respectively. Based on it, the corresponding test statistics are designed to offer meaningful fault diagnosis information and thus, the corresponding maintenance actions can be further taken to ensure the desired performance of the systems. In order to demonstrate the effectiveness of the proposed approach, a numerical example and Tennessee Eastman (TE) benchmark process are respectively utilized. It can be seen that the proposed approach shows satisfactory results not only for diagnosing KPI-related faults but also for its high fault detection rate.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A plant-wide industrial process control problem
Downs, J. J., & Vogel, E. F. (1993) · Computers & Chemical Engineering · doi:10.1016/0098-1354(93)80018-i · Cited by 3,348
Statistical process monitoring: basics and beyond
Joe Qin, S. (2003) · Journal of Chemometrics · doi:10.1002/cem.800 · Cited by 1,582
Survey on data-driven industrial process monitoring and diagnosis
Qin, S. J. (2012) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2012.09.004 · Cited by 1,470
Fault Detection and Diagnosis in Industrial Systems
Braatz, L. H. C. (2001) · Measurement Science and Technology · doi:10.1088/0957-0233/12/10/706 · Cited by 1,416
Fault Detection and Diagnosis in Industrial Systems
Chiang, L. H., Russell, E. L., & Braatz, R. D. (2001) · Advanced Textbooks in Control and Signal Processing · doi:10.1007/978-1-4471-0347-9 · Cited by 1,318
Yin, S., Ding, S. X., Haghani, A., Hao, H., & Zhang, P. (2012) · Journal of Process Control · doi:10.1016/j.jprocont.2012.06.009 · Cited by 1,294
Self-citationModel-Based Fault Diagnosis Techniques: Design Schemes, Algorithms and Tools
Ding, S. X. (2013) · Advances in Industrial Control · doi:10.1007/978-1-4471-4799-2 · Cited by 667
Real-Time Implementation of Fault-Tolerant Control Systems With Performance Optimization
Yin, S., Luo, H., & Ding, S. X. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2273477 · Cited by 644
Self-citationTotal projection to latent structures for process monitoring
Zhou, D., Li, G., & Qin, S. J. (2010) · AIChE Journal · doi:10.1002/aic.11977 · Cited by 472
Geometric properties of partial least squares for process monitoring
Li, G., Qin, S. J., & Zhou, D. (2010) · Automatica · doi:10.1016/j.automatica.2009.10.030 · Cited by 368
Nonlinear Dynamic Process Monitoring Using Canonical Variate Analysis and Kernel Density Estimations
Odiowei, P.-E. P., & Cao, Y. (2010) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2009.2032654 · Cited by 361
Open-Circuit Fault Diagnosis in PMSG Drives for Wind Turbine Applications
Freire, N. M. A., Estima, J. O., & Marques Cardoso, A. J. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2207655 · Cited by 277
Dong, H., Wang, Z., & Gao, H. (2012) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2012.2185330 · Cited by 248
Data-Driven Soft Sensor Approach for Quality Prediction in a Refining Process
Wang, D., Liu, J., & Srinivasan, R. (2010) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2009.2025124 · Cited by 198
Robust PLS approach for KPI-related prediction and diagnosis against outliers and missing data
Yin, S., Wang, G., & Yang, X. (2014) · International Journal of Systems Science · doi:10.1080/00207721.2014.886136 · Cited by 170
Self-citationFault Diagnosis and Fault-Tolerant Control in Linear Drives Using the Kalman Filter
Huang, S., Tan, K. K., & Lee, T. H. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2185011 · Cited by 152
Wang, D. (2011) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2010.2103401 · Cited by 115
Choi, S., Akin, B., Rahimian, M. M., & Toliyat, H. A. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2048837 · Cited by 108
Fault Detection Isolation and Estimation in a Vehicle Steering System
Arogeti, S. A., Wang, D., Low, C. B., & Yu, M. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2183835 · Cited by 101
Hierarchical Fault Diagnosis for Power Systems Based on Equivalent-Input-Disturbance Approach
Hu, B., She, J., & Yokoyama, R. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2213560 · Cited by 34
Data driven design of fault diagnosis systems
Yin, S. (2012) · Cited by 25
Self-citation
Cited by
Robust Backstepping Sliding Mode Control and Observer-based Fault Estimation for a Quadrotor UAV
Chen, F., Jiang, R., Zhang, K., Jiang, B., & Tao, G. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2552151 · Cited by 642
Rathore, M. M., Shah, S. A., Shukla, D., Bentafat, E., & Bakiras, S. (2021) · IEEE Access · doi:10.1109/access.2021.3060863 · Cited by 616
Gai, K., Qiu, M., & Sun, X. (2018) · Journal of Network and Computer Applications · doi:10.1016/j.jnca.2017.10.011 · Cited by 566
A Digital-Twin-Assisted Fault Diagnosis Using Deep Transfer Learning
Xu, Y., Sun, Y., Liu, X., & Zheng, Y. (2019) · IEEE Access · doi:10.1109/access.2018.2890566 · Cited by 509
Value Iteration Adaptive Dynamic Programming for Optimal Control of Discrete-Time Nonlinear Systems
Wei, Q., Liu, D., & Lin, H. (2016) · IEEE Transactions on Cybernetics · doi:10.1109/tcyb.2015.2492242 · Cited by 465
Metadata
- Authors
- Yin, S., Zhu, X., & Kaynak, O.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-03
- Volume
- 62
- Issue
- 3
- Pages
- 1651-1658
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2052828853
- Cited by
- 537
- References
- 21
- FWCI
- 99.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.