Induction Machine Bearing Fault Detection by Means of Statistical Processing of the Stray Flux Measurement
The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Abstract
Rolling bearing faults are generally slowly progressive; therefore, the development of an effective diagnostic technique could be worth detecting such faults in their incipient phase and preventing complete failure of the motor. The methods proposed in the literature for this purpose are mainly based on measuring and analyzing vibration and current. Here, a novel technique based on the stray flux measurement in different positions around the electrical machine is proposed. The main advantages of this method are due to the simplicity and the flexibility of the custom flux probe with its amplification and filtering stage. The flux probe can be easily positioned on the machines and adapted to a wide range of power levels. This paper also reports an extensive survey on the stray-flux-based fault detection methods for induction motors, prior to introducing a novel sensor/diagnostic scheme.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140 · cited 1×
“In the past years, advanced artificial-intelligence-based methods were introduced for bearing fault detection [23].”
MethodMotor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartfield, R. G. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475697 · Cited by 761
A Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2090839 · Cited by 706
Magnetic Sensors and Magnetometers
(ed), P. R. (2002) · Measurement Science and Technology · doi:10.1088/0957-0233/13/4/707 · Cited by 663
Motor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartheld, R. G. (2002) · Proceedings of 1994 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.1994.345491 · Cited by 638
Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602
Models for Bearing Damage Detection in Induction Motors Using Stator Current Monitoring
Blodt, M., Granjon, P., Raison, B., & Rostaing, G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.917108 · Cited by 568
A survey of condition monitoring and protection methods for medium voltage induction motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2009) · 2009 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2009.5316083 · Cited by 524
Prieto, M. D., Cirrincione, G., Espinosa, A. G., Ortega, J. A., & Henao, H. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2219838 · Cited by 461
Detection and location of interturn short circuits in the stator windings of operating motors
Penman, J., Sedding, H. G., Lloyd, B. A., & Fink, W. T. (1994) · IEEE Transactions on Energy Conversion · doi:10.1109/60.368345 · Cited by 394
Immovilli, F., Bellini, A., Rubini, R., & Tassoni, C. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2049623 · Cited by 382
Henao, H., Demian, C., & Capolino, G.-A. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.816531 · Cited by 361
A High-Resolution Frequency Estimation Method for Three-Phase Induction Machine Fault Detection
Kia, S. H., Henao, H., & Capolino, G.-A. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.899826 · Cited by 325
Frosini, L., & Bassi, E. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2026770 · Cited by 254
Self-citationGarcia-Perez, A., Romero-Troncoso, R. D. J., Cabal-Yepez, E., & Osornio-Rios, R. A. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2051398 · Cited by 235
Bearing Fault Model for Induction Motor With Externally Induced Vibration
Immovilli, F., Bianchini, C., Cocconcelli, M., Bellini, A., & Rubini, R. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2213566 · Cited by 181
Online Model-Based Stator-Fault Detection and Identification in Induction Motors
De Angelo, C. H., Bossio, G. R., Giaccone, S. J., Valla, M. I., Solsona, J. A., & Garcia, G. O. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2012468 · Cited by 166
Electrical machines fault diagnosis by stray flux analysis
Romary, R., Pusca, R., Lecointe, J., & Brudny, J. F. (2013) · IEEE Workshop on Electrical Machines Design, Control and Diagnosis · doi:10.1109/wemdcd.2013.6525184 · Cited by 111
Bellini, A., Immovilli, F., Rubini, R., & Tassoni, C. (2008) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/08ias.2008.26 · Cited by 110
A New Bearing Fault Detection Method in Induction Machines Based on Instantaneous Power Factor
Ibrahim, A., Badaoui, M. E., Guillet, F., & Bonnardot, F. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2003211 · Cited by 102
Boukra, T., Lebaroud, A., & Clerc, G. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2216242 · Cited by 88
Detection of eccentricity and bearings fault using stray flux monitoring
Vítek, O., Janda, M., Hajek, V., & Bauer, P. (2011) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2011.6063663 · Cited by 79
Concari, C., Franceschini, G., & Tassoni, C. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2003212 · Cited by 75
Induction machine fault diagnosis using an external radial flux sensor
Romary, R., Corton, R., Thailly, D., & Brudny, J. F. (2005) · The European Physical Journal Applied Physics · doi:10.1051/epjap:2005079 · Cited by 56
Offline and Online Methods for Stator Core Fault Detection in Large Generators
Romary, R., Demian, C., Schlupp, P., & Roger, J. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2224077 · Cited by 46
Continuous Wavelet Transform for Bearing Damage Detection in Electric Motors
Ayaz, E., Öztürk, A., & Şeker, S. (2006) · IEEE Mediterranean Electrotechnical Conference (MELECON) · doi:10.1109/melcon.2006.1653299 · Cited by 27
Cited by
Tian, J., Morillo, C., Azarian, M. H., & Pecht, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2509913 · Cited by 488
Early Fault Detection of Machine Tools Based on Deep Learning and Dynamic Identification
Luo, B., Wang, H., Liu, H., Li, B., & Peng, F. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2807414 · Cited by 307
A New Feature Extraction Method Based on EEMD and Multi-Scale Fuzzy Entropy for Motor Bearing
Zhao, H., Sun, M., Deng, W., & Yang, X. (2016) · Entropy · doi:10.3390/e19010014 · Cited by 209
“[22] proposed a novel technique based on the stray flux measurement in different positions around the electrical machine, and reports an extensive survey on the stray-flux-based fault detection methods for induction motors.”
MethodA bearing fault diagnosis model based on CNN with wide convolution kernels
Song, X., Cong, Y., Song, Y., Chen, Y., & Liang, P. (2022) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-021-03177-x · Cited by 183
Saucedo-Dorantes, J. J., Delgado-Prieto, M., Ortega-Redondo, J. A., Osornio-Rios, R. A., & Romero-Troncoso, R. D. J. (2016) · Shock and Vibration · doi:10.1155/2016/5467643 · Cited by 80
“has been used and reported in different studies [5, 11], and the artificial damaged bearingmodel 6205-2ZNR used in this experimentation is shown in Figure 5.”
Method
Metadata
- Authors
- Frosini, L., Harlisca, C., & Szabo, L.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-03
- Volume
- 62
- Issue
- 3
- Pages
- 1846-1854
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W1999053292
- Cited by
- 264
- References
- 26
- FWCI
- 22.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.