The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
A Dynamic Charging System With Reduced Output Power Pulsation for Electric Vehicles
Abstract
This paper proposes a continuous dynamic wireless power transfer system for electric vehicles that reduces power pulsations during the charging process. Multiple rectangular unipolar coils are used at the primary side as the transmitters, and another unipolar coil works as a receiver at the secondary side. The transmitters are placed closely together to reduce the variation of magnetic fields along the moving track of the receiver. This structure induces self-coupling between the adjacent transmitters. An LCC-compensated circuit topology is utilized, and a compensation parameter design is provided which considers self-coupling between the primary coils. Finite-element analysis of the dynamic charging system is performed using Maxwell. The receiver size is optimized to reduce the variation of the coupling coefficient. A 1.4-kW dynamic charging prototype is constructed according to the designed coil structure and circuit parameters. There are six transmitters, each with dimensions 388 mm×400 mm, and one receiver with dimensions 485 mm×400 mm. Experimental results show that the output power pulsation is within ±7.5% in the dynamic charging process, and the maximum efficiency is 89.78%. If the edge effects of the transmitters are neglected, then the power pulsation is within ±2.9%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wireless Power Transfer for Electric Vehicle Applications
Li, S., & Mi, C. C. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2319453 · Cited by 2,185
Self-citationGUIDELINES FOR LIMITING EXPOSURE TO TIME-VARYING ELECTRIC AND MAGNETIC FIELDS (1 Hz TO 100 kHz)
(2010) · Health Physics · doi:10.1097/hp.0b013e3181f06c86 · Cited by 2,164
Modern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263
Lin, J., Saunders, R. A., Schulmeister, K., Söderberg, P. G., Stuck, B. E., Swerdlow, A. J., Taki, M., Veyret, B., Ziegelberger, G., Repacholi, M. H., et al. (2010) · HAL · Cited by 1,261
A Double-Sided LCC Compensation Network and Its Tuning Method for Wireless Power Transfer
Li, S., Li, W., Deng, J., Nguyen, T. D., & Mi, C. C. (2015) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2014.2347006 · Cited by 1,091
Self-citationShin, J., Shin, S., Kim, Y., Ahn, S., Lee, S., Jung, G., Jeon, S.-J., & Cho, D.-H. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2258294 · Cited by 856
Advances in Wireless Power Transfer Systems for Roadway-Powered Electric Vehicles
Choi, S. Y., Gu, B. W., Jeong, S. Y., & Rim, C. T. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2343674 · Cited by 682
Narrow-Width Inductive Power Transfer System for Online Electrical Vehicles
Huh, J., Lee, S. W., Lee, W. Y., Cho, G. H., & Rim, C. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2160972 · Cited by 669
A Three-Phase Inductive Power Transfer System for Roadway-Powered Vehicles
Covic, G. A., Boys, J. T., Kissin, M. L. G., & Lu, H. G. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.904025 · Cited by 439
Cutting the Cord: Static and Dynamic Inductive Wireless Charging of Electric Vehicles
Lukic, S., & Pantic, Z. (2013) · IEEE Electrification Magazine · doi:10.1109/mele.2013.2273228 · Cited by 424
Economic Analysis of the Dynamic Charging Electric Vehicle
Jeong, S., Jang, Y. J., & Kum, D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2424712 · Cited by 374
ORNL Experience and Challenges Facing Dynamic Wireless Power Charging of EV's
Miller, J. M., Jones, P. T., Li, J.-M., & Onar, O. C. (2015) · IEEE Circuits and Systems Magazine · doi:10.1109/mcas.2015.2419012 · Cited by 334
Ko, Y. D., & Jang, Y. J. (2013) · IEEE Transactions on Intelligent Transportation Systems · doi:10.1109/tits.2013.2259159 · Cited by 289
Miller, J. M., Onar, O. C., White, C., Campbell, S., Coomer, C., Seiber, L., Sepe, R., & Steyerl, A. (2014) · IEEE Power Electronics Magazine · doi:10.1109/mpel.2014.2300978 · Cited by 256
A novel wireless power transfer for in-motion EV/PHEV charging
Onar, O. C., Miller, J. M., Campbell, S. L., Coomer, C., White, C. P., & Seiber, L. E. (2013) · 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2013.6520738 · Cited by 244
Multiphase Pickups for Large Lateral Tolerance Contactless Power-Transfer Systems
Elliott, G., Raabe, S., Covic, G. A., & Boys, J. T. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2031184 · Cited by 234
Driving Range Extension of EV With On-Road Contactless Power Transfer—A Case Study
Chopra, S., & Bauer, P. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2182015 · Cited by 225
New Cross-Segmented Power Supply Rails for Roadway-Powered Electric Vehicles
Choi, S., Huh, J., Lee, W. Y., Lee, S. W., & Rim, C. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2247634 · Cited by 196
Choi, S. Y., Huh, J., Lee, W. Y., & Rim, C. T. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2305172 · Cited by 192
Generalized Active EMF Cancel Methods for Wireless Electric Vehicles
Choi, S. Y., Gu, B. W., Lee, S. W., Lee, W. Y., Huh, J., & Rim, C. T. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2295094 · Cited by 184
Reflexive Field Containment in Dynamic Inductive Power Transfer Systems
Lee, K., Pantic, Z., & Lukic, S. M. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2287262 · Cited by 173
Interphase Mutual Inductance in Polyphase Inductive Power Transfer Systems
Kissin, M. L. G., Boys, J. T., & Covic, G. A. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2020076 · Cited by 165
Double-Coupled Systems for IPT Roadway Applications
Chen, L., Nagendra, G. R., Boys, J. T., & Covic, G. A. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2325943 · Cited by 163
Jang, Y. J., Suh, E. S., & Kim, J. (2015) · IEEE Systems Journal · doi:10.1109/jsyst.2014.2369485 · Cited by 147
Practical Design Considerations for Contactless Power Transfer Quadrature Pick-Ups
Raabe, S., & Covic, G. A. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2165461 · Cited by 110
Development of a high efficiency primary side controlled 7kW wireless power charger
Deng, J., Lu, F., Li, S., Nguyen, T.-D., & Mi, C. C. (2014) · IEEE International Electric Vehicle Conference · doi:10.1109/ievc.2014.7056204 · Cited by 82
Self-citationDistributed IPT Systems for Dynamic Powering: Misalignment Analysis
Venugopal, P., & Bauer, P. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2311380 · Cited by 74
Lu, F., Hofmann, H. F., Deng, J., et al. (2015) · IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2015.7104410 · Cited by 65
Self-citationLi, J.-M., Jones, P. T., Onar, O. C., & Starke, M. R. (2014) · IEEE International Electric Vehicle Conference · doi:10.1109/ievc.2014.7056218 · Cited by 11
Cited by
Wireless Power Transfer for Electric Vehicle Applications
Li, S., & Mi, C. C. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2319453 · Cited by 2,185
Self-citationAdvances in High-Power Wireless Charging Systems: Overview and Design Considerations
Feng, H., Tavakoli, R., Onar, O. C., & Pantic, Z. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3012543 · Cited by 368
Metadata
- Authors
- Lu, F., Zhang, H., Hofmann, H., & Mi, C. C.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2016-10
- Volume
- 63
- Issue
- 10
- Pages
- 6580-6590
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2346607811
- Cited by
- 298
- References
- 29
- FWCI
- 14.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.