Optimal Design and Implementation of High-Voltage High-Power Silicon Steel Core Medium-Frequency Transformer
The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Abstract
A 1.5 kV, 35 kW, 1 kHz silicon steel core medium-frequency transformer is designed and prototyped for a 10 kV, 0.5 MW electronic power transformer. This transformer uses 0.18 mm silicon steel as core material due to the advantages of easy processing, high saturation flux density, low noise, and low cost. The detailed design considerations and an optimal design method are presented in this paper. Different from the previous work on medium-frequency transformer design, the proposed approach takes ripples into account. Core loss model under square wave excitation with ripple and winding loss model considering sideband harmonics are established. Besides, two-dimensional finite-element simulations are adopted to obtain ac/dc resistance factors. Finally, the proposed approach is verified by experiments on prototype. The test results show performance better than expected, with desirable no-load loss and power density of 2.9623 × 106W/m3.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Transformer and Inductor Design Handbook
McLyman, C. W. T. (2004) · CRC Press eBooks · doi:10.1201/9780203913598 · Cited by 1,369
Review of Solid-State Transformer Technologies and Their Application in Power Distribution Systems
She, X., Huang, A. Q., & Burgos, R. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2277917 · Cited by 1,164 · cited 1×
“HV and high power bring some of the following issues [14] to MFT design.”
BackgroundVenkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H. (2003) · 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings. · doi:10.1109/cipe.2002.1196712 · Cited by 1,145 · cited 2×
“For piecewise flux densities, simplifies to [29]”
MethodPower Electronic Traction Transformer—Medium Voltage Prototype
Zhao, C., Dujic, D., Mester, A., Steinke, J. K., Weiss, M., Lewdeni-Schmid, S., Chaudhuri, T., & Stefanutti, P. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2278960 · Cited by 478 · cited 2×
“These conversion systems are known as solid-state transformer (SST) [2], power electronic transformer (PET) [3], electronic power transformer (EPT) [4], and power electronic traction transformer [5].”
BackgroundDesign and Demonstration of a 3.6-kV–120-V/10-kVA Solid-State Transformer for Smart Grid Application
She, X., Yu, X., Wang, F., & Huang, A. Q. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2293471 · Cited by 324 · cited 3×
“imize winding loss [9], [13], [23], [28], while usually Litz wire windings have the drawback of low window utilization.”
BackgroundVasiladiotis, M., & Rufer, A. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2367237 · Cited by 275 · cited 2×
“As a kind of typical application of MFT, EPT [11], also called SST or PET, is a new family member of power transformer, which can provide high quality of electric energy to consumer and improve the dynamic performance and stability of the power grid by increasing system damping under disturbances.”
BackgroundGlobal Loss Evaluation Methods for Nonsinusoidally Fed Medium-Frequency Power Transformers
Villar, I., Viscarret, U., Etxeberria-Otadui, I., & Rufer, A. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2021174 · Cited by 197 · cited 9×
“In addition, for normal square wave excitation, core loss density for silicon steel core can be calculated as [1]”
BackgroundMethodInfluentialMulti-functional On-board Battery Charger for Plug-in Electric Vehicles
Kim, S., & Kang, F.-S. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2376878 · Cited by 187 · cited 1×
“With the continuous improving on the overall performance, silicon steel cores will have the potential to be used in some emerging high-power applications such as charging system for electric vehicles [21], and high-power dc transformer [22].”
BackgroundOptimized design of medium frequency transformers with high isolation requirements
Ortiz, G., Biela, J., & Kolar, J. W. (2010) · IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society · doi:10.1109/iecon.2010.5675240 · Cited by 159 · cited 6×
“Their applications include power gridconnected converters, traction and offshore wind farm [6]–[8].”
BackgroundMethodInfluentialZhao, B., Song, Q., & Liu, W. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2350459 · Cited by 143
Cited by
Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters
Guo, Z., Yu, R., Xu, W., Feng, X., & Huang, A. Q. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3059879 · Cited by 115
“Previous research [11], [12], [15], [16] investigated the optimal design methodologies for MFTs.”
BackgroundChen, B., Liang, X., & Wan, N. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2987944 · Cited by 102
“[24] presented an optimal design method based on the optimal flux density to minimize the total loss to achieve a high efficiency design, and a 1.”
MethodRonanki, D., & Williamson, S. S. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2765518 · Cited by 90
“The comparative analysis of different core structures was carried out in [48], [50], and [51], and core type transformers are recommended for most MFT”
BackgroundMethodA Compact Modular Multilevel DC–DC Converter for High Step-Ratio MV and HV Use
Xiang, X., Zhang, X., Luth, T., Merlin, M., & Green, T. C. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2793249 · Cited by 76
Power electronic transformers: A review
Battal, F., Balcı, S., & Sefa, İ. (2020) · Measurement · doi:10.1016/j.measurement.2020.108848 · Cited by 79
High Efficiency Integrated Transformer Design in DAB Converters for Solid-State Transformers
Lee, E. S., Park, J. H., Kim, M. Y., & Lee, J. S. (2022) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2022.3168561 · Cited by 63
Investigation on the Selection and Design of Step-Up/Down 18-Pulse ATRUs for More Electric Aircrafts
Chen, J., Shen, J., Chen, J., Shen, P., Song, Q., & Gong, C. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2930422 · Cited by 57
Partial Discharge Features for Power Electronic Transformers Under High-Frequency Pulse Voltage
Jiang, J., Zhang, B., Li, Z., Ranjan, P., Chen, J., & Zhang, C. (2021) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2021.3053960 · Cited by 53
“The voltage applied in the HFT winding is generally impulse voltage [18], [19].”
BackgroundLee, J.-S., Sim, H.-W., Kim, J.-Y., & Lee, K. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2772139 · Cited by 50
Advanced Ferromagnetic Materials in Power Electronic Converters: A State of the Art
Rodriguez-Sotelo, D., Rodríguez, M., Soriano-Sánchez, A. G., Espinosa-Calderon, A., & Pérez-Pinal, F. J. (2020) · IEEE Access · doi:10.1109/access.2020.2982161 · Cited by 49
“6 [99], [129], [134]–[137].”
Rasilo, P., Martinez, W. H., Fujisaki, K., Kyyrä, J., & Ruderman, A. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2835661 · Cited by 41
Analytical Calculation of Static Capacitance for High-Frequency Inductors and Transformers
Chagas, N. B., & Marchesan, T. B. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2829716 · Cited by 42
Yang, M., Li, Y., Yang, Q., Lin, Z., Yue, S., Wang, H., & Liu, C. (2020) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2020.2976929 · Cited by 37
“As a key magnetic component in SST, the high frequency transformer (HFT) has a widely application for small volume and light weight [1].”
BackgroundSomkun, S., Sato, T., Chunkag, V., Pannawan, A., Nunocha, P., & Suriwong, T. (2021) · Energies · doi:10.3390/en14092407 · Cited by 33
“Note that the on-load test of the transformers was conducted by the authors of [22] with a full bridge rectifier at the secondary winding, rather than an active bridge.”
BackgroundA Novel Parallel Configured 48-Pulse Auto-Transformer Rectifier for Aviation Application
Chen, J., Bai, H., Chen, J., & Gong, C. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3106322 · Cited by 33
Review on low‐frequency ripple suppression methods for MMCs for medium‐voltage drive applications
Wang, Z., Chen, J., Liao, K., Xiong, J., & Zhang, K. (2018) · IET Power Electronics · doi:10.1049/iet-pel.2018.5657 · Cited by 32
Design Optimization of Medium-Frequency Transformer for DAB Converters With DC Bias Capacity
Yao, P., Jiang, X., Xue, P., Li, S., Lu, S., & Wang, F. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3010155 · Cited by 28
Guo, Z., Chen, Z., & Chen, Z. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3299946 · Cited by 27
“In the basic optimal transformer design, the loss is calculated first, then the core, wire type, and the shape of the winding are selected [14].”
MethodRuiz-Robles, D., Venegas‐Rebollar, V., Anaya-Ruiz, A., Moreno‐Goytia, E. L., & Rodriguez‐Rodrıguez, J. R. (2018) · Energies · doi:10.3390/en11082081 · Cited by 28
“Reference Frequency (kHz) Bac (Teslas) Core Material Power (kVA) Efficiency (%) Power Density (kW/l) [14] 1 0.”
BackgroundMethodInfluentialRuiz-Robles, D., Ortíz-Marín, J., Venegas‐Rebollar, V., Moreno‐Goytia, E. L., Granados‐Lieberman, D., & Rodriguez‐Rodrıguez, J. R. (2019) · Energies · doi:10.3390/en12112062 · Cited by 21
“Core Material Power (kVA) Frequency (kHz) Flux Density (T) Power Density (kW/L) Efficiency Silicon steel [18] 35 1 0.”
BackgroundMethodResultInfluentialLu, R., Li, C., Yu, J., Li, C., Li, W., & He, X. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3304339 · Cited by 21
Solid state transformer technologies and applications: A bibliographical survey
Adabi, M. E., Universitat Politecnica de Catalunya, B., & Martinez-Velasco, J. A. (2018) · AIMS energy · doi:10.3934/energy.2018.2.291 · Cited by 20
Dang, Y., Zhu, L., Liu, Z., & Ji, S. (2023) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2023.3239849 · Cited by 18
“THE leakage inductance of a high-frequency frequency transformer plays a critical role in the optimization of the power electronic transformer (PET) design [1], [2], [3], [4], [5],”
BackgroundStudy of a High-Power Medium Frequency Transformer Using Amorphous Magnetic Material
Zhang, S., Chen, D., & Bai, B. (2022) · Symmetry · doi:10.3390/sym14102129 · Cited by 16
“In [19], the thin silicon steel was selected as the magnetic core material, and the feasibility of the thin silicon steel material working in medium frequency was explored.”
BackgroundChen, B. (2019) · IET Power Electronics · doi:10.1049/iet-pel.2019.0069 · Cited by 15
Loss Analysis of Nanocrystalline Cores for High Frequency Transformer in Power Electronics Circuits
Munir, M. U., Ehab, M., Tawfik, M. A., Ahmed, A., & Park, J. (2023) · Journal of Electrical Engineering and Technology · doi:10.1007/s42835-023-01711-9 · Cited by 14
Kiran, M. R., Farrok, O., Islam, M. R., & Zhu, J. G. (2019) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2019.8922055 · Cited by 13
“At present, soft magnetic material including silicon steel, Fe-based amorphous stripes, and Fe-based nanocrystalline alloys are being used for high frequency transformer design [10], [17].”
BackgroundMethodInfluentialA Medium Frequency Transformer Design Tool with Methodologies Adapted to Various Structures
Fouineau, A., Guillet, M., Lefebvre, B., Raulet, M., & Sixdenier, F. (2020) · International Conference on Ecological Vehicles and Renewable Energies (EVER) · doi:10.1109/ever48776.2020.9243104 · Cited by 14
“Because of this complexity, a lot of work has been done to develop MFT design methodologies [6-11].”
Bu, Z., Wang, J., Li, X., & Sun, X. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3219127 · Cited by 12
“When the main harmonic frequency is close to the sideband harmonic frequency, the ac/dc resistance ratio can be approximately equal [22].”
BackgroundKiran, M. R., Farrok, O., Islam, M. R., & Zhu, J. G. (2021) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2021.3114136 · Cited by 11
“Transformers functioning at higher frequency range under goes considerable amount of core losses and therefore, these losses must be accurately analyzed [9].”
BackgroundInfluentialSolid-State Transformers of Smart High-Power Battery Charger for Electric Vehicles
Roger, D., Napieralska‐Juszczak, E., Komęza, K., & Napieralski, P. (2023) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2023.3282200 · Cited by 10
“2 T but at lower frequencies than ferrites [16], [19].”
BackgroundGuo, Y., Lu, C., Hua, L., & Zhang, X. (2020) · Energies · doi:10.3390/en13143654 · Cited by 9
Ortíz-Marín, J., Ruiz-Robles, D., Moreno‐Goytia, E. L., & Venegas‐Rebollar, V. (2023) · Electric Power Systems Research · doi:10.1016/j.epsr.2023.109900 · Cited by 9
Demirdelen, T. (2019) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2019.1637973 · Cited by 9
“However, dry type transformers (Aksu and Demirdelen 2018; Amoiralis, Tsili, and Georgilakis 2008; Aşkın, İskender, and Mamızadeh 2011; Ayala 2015; Çelebi 2008; Coelho et al. 2014; Dos Santos Coelho et al. 2013; Ebenezer and Nair 2010; Finocchio et al. 2017; Georgilakis 2009; Gouda, Amer, and Salem 2012; Huang et al. 2…”
BackgroundMethodFerrites and Nanocrystalline Alloys Applied to DC–DC Converters for Renewable Energies
Ruiz-Robles, D., Ortíz-Marín, J., Moreno‐Goytia, E. L., Fuerte, C., Venegas‐Rebollar, V., Vargas, A., & Vergara–Hernández, H. J. (2022) · Applied Sciences · doi:10.3390/app12020709 · Cited by 9
Electrical Stress on the Medium Voltage Medium Frequency Transformer
Zheng, C., Wang, Q., Huai, W., Shen, Z., & Bak, C. L. (2021) · Energies · doi:10.3390/en14165136 · Cited by 8
“A transformer prototype proposed in the literature [8,19] is selected as a typical case for the electrical stress study.”
MethodDesign and Implementation of 10-kV MW-level Electronic Power Transformer (EPT)
Wang, D., Yang, Y., Tian, J., Mao, C., & Zhang, J. (2018) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2018.8544706 · Cited by 9
“However, up to now, there is a great challenge for high-voltage high-power medium frequency transformer design and implementation, where the tradeoff between high voltage isolation requirements and thermal management, and the impact of the mixed-frequency electrical field stress needs to be understood better [4], and…”
BackgroundSelf-citationNa, J. K., Koo, Y. M., & Park, S. M. (2023) · Materials Characterization · doi:10.1016/j.matchar.2023.112821 · Cited by 6
Ruiz-Robles, D., Figueroa-Barrera, C., Moreno‐Goytia, E. L., & Venegas‐Rebollar, V. (2020) · Electronics · doi:10.3390/electronics9030453 · Cited by 6
“The selection of nanocrystalline material is due to its favourable characteristics for medium frequency operation [23,24], including a high efficiency and high-power density, compared to silicon steel [3], ferrites [2] and amorphous materials [1].”
BackgroundMethodInfluentialSoares, A. L., Neto, A. D. O. C., Barbosa, V. F., Lima, G. B. D., & de Freitas, L. C. (2022) · IEEE Access · doi:10.1109/access.2022.3185996 · Cited by 6
“Compared to the amorphous core, it has more advantages in terms of noise, cost, saturation flux density and power density in applications with high power and medium frequency range [34].”
BackgroundNa, J., Ko, H.-S., Koo, Y. M., & Park, S. M. (2022) · Scripta Materialia · doi:10.1016/j.scriptamat.2022.115145 · Cited by 6
Dang, Y., Zhu, L., Liu, F., Zhang, F., Liu, Z., & Ji, S. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3521456 · Cited by 7
“T EMPERATURE prediction is critical for the optimal de-sign of high-frequency transformers (HFTs) [1], [2], [3], [4], [5], [6], [7].”
A laboratory application for teaching the effect of harmonics on transformer core saturation
Dönük, A. (2019) · International Journal of Electrical Engineering Education · doi:10.1177/0020720919837852 · Cited by 6
On the Dynamics of Inherent Balancing of Modular Multilevel DC–AC–DC Converters
Xiang, X. J., Gu, Y., Chen, K., Astolfi, A., & Green, T. C. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3001431 · Cited by 6
“A practical square-wave internal transformer could be designed according to the principles in [14] and the transformer in this prototype is set to operate at the medium frequency of 3 kHz (TBC = 1/3000 s) after consideration of the practical applications of MMDACs [15].”
MethodAnalyzing Power Losses and Performance of an Isolated DC-DC Converter for Renewable Energies Systems
Ortíz-Marín, J., Gallo-Reyes, D., Ruiz-Robles, D., & Venegas‐Rebollar, V. (2023) · Electronics · doi:10.3390/electronics12051110 · Cited by 7
Investigation of the effects of mixed electric field stress on high voltage transformer insulation
Seyfi, P., Zahedi, S., Shojaei, H., & Ghomi, H. (2022) · Electrical Engineering · doi:10.1007/s00202-021-01480-6 · Cited by 5
Na, J. K., Park, S. M., & Koo, Y. M. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.105708 · Cited by 4
Valencia, T. E. S., Ruiz-Robles, D., Ortíz-Marín, J., Franco, J. A., Hernández-Escobedo, Q., & Moreno‐Goytia, E. L. (2024) · Technologies · doi:10.3390/technologies12120246 · Cited by 4
“The operation of silicon steel at a 2 kHz frequency is not an acceptable option in the proposed converter because at this specification, the transformer size increases [18].”
Power Loss Analysis and Optimal Design of High Efficiency MW-level Medium Frequency Transformer
Hu, J., Ma, Y., Cui, B., Tang, X., Yang, Z., & Zhao, B. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861574 · Cited by 4
Investigation of Optimal Excitation Waveforms for Medium Frequency Transformers
Zhang, Z., Zhang, L., Qin, J., Duan, Q., & Sheng, W. (2018) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8558423 · Cited by 4
A Power Circulation Method Using Two Frequencies in Motor Emulator System
Lee, J., & Nam, K. (2020) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2020.2998090 · Cited by 3
A Three-Stage Power Electronic Transformer With Time-Sharing H-Bridges
Li, H., Zhang, C., Li, H., Mo, X., & Wei, P. (2021) · IEEE ECCE Asia Downunder · doi:10.1109/ecce-asia49820.2021.9479015 · Cited by 2
Ruiz-Robles, D., Moreno‐Goytia, E. L., Venegas‐Rebollar, V., & Salgado‐Herrera, N. M. (2020) · Electronics · doi:10.3390/electronics9030470 · Cited by 2
“5 T Ruiz 2018, [2] Bahmani 2016, [5] Asier 2017, [1] Huang 2017, [6] nanocrystalline nanocrystalline ferrite silicon steel > 99% > 99% > 99% > 99% 15.”
BackgroundInfluentialMagnetic behaviour of GOES wound cores of transformers fed by square or sine voltages
Roger, D., Rossi, M., Ichou, H., & Blaszkowski, J. (2022) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2022.170032 · Cited by 2
Multi-objective GPR-based design optimization of high frequency transformers
Olowu, T. O., Behnamfar, M., Odeyomi, O. T., & Sarwat, A. I. (2025) · Power Electronic Devices and Components · doi:10.1016/j.pedc.2025.100122 · Cited by 1
Design of an Inductor-Integrated Transformer Applied to Inverter Power Supply
Zhang, X., Wang, R., Xiao, F., Jie, G., Lou, X., & Yang, B. (2020) · IEEE China International Youth Conference on Electrical Engineering (CIYCEE) · doi:10.1109/ciycee49808.2020.9332613 · Cited by 1
“In [6], a 1kHz/35kW MFT is designed, and the proposed approach considers the influence of ripples on the iron loss.”
MethodHuang, P., Dian, R., Wang, P., Wang, D., Liu, Z., & Wang, Q. (2021) · Energies · doi:10.3390/en14113285 · Cited by 4
Self-citationAjayi-Obe, A. A., & Khan, A. (2017) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8096424 · Cited by 1
Xu, N., & Sun, L. (2019) · IEEE Access · doi:10.1109/access.2019.2941976 · Cited by 1
“Many achievements have been made in the research of finite frequency domain [11]–[13].”
BackgroundZhou, Y., & Guo, J. (2021) · Asia Conference on Energy and Electrical Engineering (ACEEE) · doi:10.1109/aceee51855.2021.9575046 · Cited by 1
Electrical stress suffered by medium voltage medium frequency transformer
Zheng, C., Wang, Q., Wang, H., Shen, Z., & Bak, C. L. (2021) · IEEE Electrical Insulation Conference (EIC) · doi:10.1109/eic49891.2021.9612278 · Cited by 1
Xu, X., Li, J., Yu, J., Jiang, X., & Shao, G. (2021) · International Journal of Electrochemical Science · doi:10.20964/2021.08.39 · Cited by 1
Lithium-ion Battery Charger for BEV Applications Based on MF Full-bridge DC-DC Converter
Anto, B., & PRATAMA, D. B. (2023) · ELKOMIKA Jurnal Teknik Energi Elektrik Teknik Telekomunikasi & Teknik Elektronika · doi:10.26760/elkomika.v11i4.1013 · Cited by 1
Thermal characteristics analysis of medium frequency transformer under multiple working conditions
Huang, P., Shen, T., Liu, Z., Dian, R., Xu, W., & Wang, D. (2023) · Thermal Science · doi:10.2298/tsci230807239h · Cited by 1
Self-citationA Novel Hybrid-Core Structure for Split-Core Inverter Output Transformers
Sefa, İ., Altın, N., Özdemir, Ş., Balcı, S., & Battal, F. (2025) · Journal of Electrical Engineering and Technology · doi:10.1007/s42835-025-02440-x · Cited by 1
“…efficiency, less vibration/noise levels and better ther - mal properties in the inverter transformers operating in the medium-frequency range, silicon steel alloys with 3%-6.5% Si content are used in designs in the 1–5 kHz range due to their lower cost and well-known magnetic properties [22, 23].”
InfluentialELECTRIC STRESS AND INSULATION FAILURE MECHANISM OF MEDIUM VOLTAGE MEDIUM FREQUENCY TRANSFORMER
Zheng, C. (2023) · VBN Forskningsportal (Aalborg Universitet) · doi:10.54337/aau561784653 · Cited by 1
Fouineau, A. (2019) · theses.fr (ABES) · doi:10.70675/9c9cfcdez524fz4b1ezb2acz97f0aacb4e39 · Cited by 2
Accelerating Virtual Hotspots Analysis in Static Electromagnetic Devices
Wanjiku, J. (2019) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2019.8785211
“These increase the winding loss, hence the hotspot temperature [5], [6], [12], [16].”
Background18-Pulse Autotransformer with Differential Delta Connection for MEA Application
Soares, A. L., Neto, A. D. O. C., Barbosa, V. F., Lima, G. B. D., de Freitas, L. C., & Vieira, J. B. (2022) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43599.2022.9773696
“%) and reduced input line current THD (8.63% at 400Hz and 7.66% at 800Hz), demonstrating the effectiveness and attractiveness of the proposed solution for MEA application.”
BackgroundInfluentialNurhana, T., Kalandro, G. D., & Kaloko, B. S. (2022) · JE-UNISLA · doi:10.30736/je-unisla.v7i2.844
High power - high frequency transformer design constrains
Franko, M., Kučera, R., Biel, Z., & Holček, R. (2023) · Transport and Communications · doi:10.26552/tac.c.2023.1.2
Design of Power Transformer with Frequency 1 Khz
Franko, M., Kučera, R., Biel, Z., Holček, R., & Frivaldský, M. (2023) · Communications - Scientific letters of the University of Zilina · doi:10.26552/com.c.2023.055
Solid-state transformer and magnetic properties with potential topologies
Li, Y., Yang, M., & Bahman, A. S. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-85622-5.00009-2
Zhao, Y., Tan, R., Yang, F., & Lin, J. (2025) · International Conference on Smart Grid and Artificial Intelligence (SGAI) · doi:10.1109/sgai64825.2025.11009743
“An effective solution is to develop high-capacity high-voltage MFTs that can replace the original series or parallel scheme [6].”
Liu, R., Xu, W., Zeng, Y., Hu, A., Wang, F., Tang, B., & Li, L. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3634771
Study on Refined Temperature Field Modeling of Toroidal Core Medium-Frequency Transformer
Huang, P., Ma, W., Dian, R., & Wang, Q. (2025) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.23919/icems66262.2025.11317017
“2) Calculation of windings l oss Considering the influence of skin and proximity effects on the winding loss at medium frequency, for the high-order harmonics generated by non-sinusoidal excitation, it is necessary to calculate the winding losses at different frequencies respectively [9] .”
Self-citationHu, J., Zhao, B., Cui, B., Ma, Y., Tang, X., & Yang, Z. (2026) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2026.3675095
Ortíz-Marín, J., Anaya-Ruiz, G. A., Herrejón-Pintor, G. A., Venegas‐Rebollar, V., & Moreno‐Goytia, E. L. (2026) · Technologies · doi:10.3390/technologies14100631
Metadata
- Authors
- Huang, P., Mao, C., Wang, D., Wang, L., Duan, Y., Qiu, J., Xu, G., & Cai, H.
- Affiliations
- Huazhong University of Science and Technology (CN)
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2017-06
- Volume
- 64
- Issue
- 6
- Pages
- 4391-4401
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2589570930
- Cited by
- 78
- References
- 32
- Citations by year
- 2026: 2 · 2025: 5 · 2024: 4 · 2023: 14 · 2022: 10 · 2021: 11 · 2020: 12 · 2019: 9 · 2018: 8 · 2017: 3
- FWCI
- 3.64
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Industrial Electronics (publishedVersion)
- Funders
- National Natural Science Foundation of China (51277083, 51361130151)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetic Properties and Applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Keywords
- medium frequency transformer, silicon steel core, solid-state transformer, square wave excitation, winding losses, sideband harmonics, no-load losses, power density
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.