Optimal Design and Implementation of High-Voltage High-Power Silicon Steel Core Medium-Frequency Transformer
The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Abstract
A 1.5 kV, 35 kW, 1 kHz silicon steel core medium-frequency transformer is designed and prototyped for a 10 kV, 0.5 MW electronic power transformer. This transformer uses 0.18 mm silicon steel as core material due to the advantages of easy processing, high saturation flux density, low noise, and low cost. The detailed design considerations and an optimal design method are presented in this paper. Different from the previous work on medium-frequency transformer design, the proposed approach takes ripples into account. Core loss model under square wave excitation with ripple and winding loss model considering sideband harmonics are established. Besides, two-dimensional finite-element simulations are adopted to obtain ac/dc resistance factors. Finally, the proposed approach is verified by experiments on prototype. The test results show performance better than expected, with desirable no-load loss and power density of 2.9623 × 106W/m3.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Transformer and Inductor Design Handbook
McLyman, C. W. T. (2004) · CRC Press eBooks · doi:10.1201/9780203913598 · Cited by 1,369
Review of Solid-State Transformer Technologies and Their Application in Power Distribution Systems
She, X., Huang, A. Q., & Burgos, R. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2277917 · Cited by 1,164 · cited 1×
“HV and high power bring some of the following issues [14] to MFT design.”
BackgroundVenkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H. (2003) · 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings. · doi:10.1109/cipe.2002.1196712 · Cited by 1,145 · cited 2×
“For piecewise flux densities, simplifies to [29]”
MethodPower Electronic Traction Transformer—Medium Voltage Prototype
Zhao, C., Dujic, D., Mester, A., Steinke, J. K., Weiss, M., Lewdeni-Schmid, S., Chaudhuri, T., & Stefanutti, P. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2278960 · Cited by 478 · cited 2×
“These conversion systems are known as solid-state transformer (SST) [2], power electronic transformer (PET) [3], electronic power transformer (EPT) [4], and power electronic traction transformer [5].”
BackgroundDesign and Demonstration of a 3.6-kV–120-V/10-kVA Solid-State Transformer for Smart Grid Application
She, X., Yu, X., Wang, F., & Huang, A. Q. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2293471 · Cited by 324 · cited 3×
“imize winding loss [9], [13], [23], [28], while usually Litz wire windings have the drawback of low window utilization.”
BackgroundVasiladiotis, M., & Rufer, A. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2367237 · Cited by 275 · cited 2×
“As a kind of typical application of MFT, EPT [11], also called SST or PET, is a new family member of power transformer, which can provide high quality of electric energy to consumer and improve the dynamic performance and stability of the power grid by increasing system damping under disturbances.”
BackgroundGlobal Loss Evaluation Methods for Nonsinusoidally Fed Medium-Frequency Power Transformers
Villar, I., Viscarret, U., Etxeberria-Otadui, I., & Rufer, A. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2021174 · Cited by 197 · cited 9×
“In addition, for normal square wave excitation, core loss density for silicon steel core can be calculated as [1]”
BackgroundMethodInfluentialMulti-functional On-board Battery Charger for Plug-in Electric Vehicles
Kim, S., & Kang, F.-S. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2376878 · Cited by 187 · cited 1×
“With the continuous improving on the overall performance, silicon steel cores will have the potential to be used in some emerging high-power applications such as charging system for electric vehicles [21], and high-power dc transformer [22].”
BackgroundOptimized design of medium frequency transformers with high isolation requirements
Ortiz, G., Biela, J., & Kolar, J. W. (2010) · IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society · doi:10.1109/iecon.2010.5675240 · Cited by 159 · cited 6×
“Their applications include power gridconnected converters, traction and offshore wind farm [6]–[8].”
BackgroundMethodInfluentialZhao, B., Song, Q., & Liu, W. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2350459 · Cited by 143
High-Density Nanocrystalline Core Transformer for High-Power High-Frequency Resonant Converter
Shen, W., Wang, F., Boroyevich, D., & Tipton IV, C. W. (2008) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.912726 · Cited by 123 · cited 7×
“Using (11), (14), and (15), for silicon steel cores with different dimensions, the total loss [13] can be calculated for each core”
BackgroundMethodInfluential1-MHz LLC Resonant DC Transformer (DCX) With Regulating Capability
Wu, X., Chen, H., & Qian, Z. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2521606 · Cited by 106 · cited 1×
“With the continuous improving on the overall performance, silicon steel cores will have the potential to be used in some emerging high-power applications such as charging system for electric vehicles [21], and high-power dc transformer [22].”
BackgroundAnalytical Design Methodology for Litz-Wired High-Frequency Power Transformers
Barrios, E. L., Ursua, A., Marroyo, L., & Sanchis, P. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2351786 · Cited by 99 · cited 3×
“imize winding loss [9], [13], [23], [28], while usually Litz wire windings have the drawback of low window utilization.”
BackgroundMethodIron Losses in a Medium-Frequency Transformer Operated in a High-Power DC–DC Converter
Soltau, N., Eggers, D., Hameyer, K., & Doncker, R. W. D. (2014) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2013.2283733 · Cited by 92 · cited 10×
“ΔP can be determined based on the measured and calculated results in [10].”
BackgroundMethodInfluentialHigh-Frequency Power Transformers With Foil Windings: Maximum Interleaving and Optimal Design
Barrios, E. L., Urtasun, A., Ursúa, A., Marroyo, L., & Sanchis, P. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2368832 · Cited by 84 · cited 4×
“With respect to winding current with rich harmonic content, the total winding loss includes copper losses caused by each harmonics [23].”
BackgroundMethodInfluentialHu, Y., Zeng, R., Cao, W., Zhang, J., & Finney, S. J. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2510975 · Cited by 80
Du, S. B. Y., Wang, G., & Bhattacharya, S. (2010) · IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society · doi:10.1109/iecon.2010.5674991 · Cited by 75 · cited 3×
“Previous efforts on MFT design can be found in the literature [1], [8], [10], [15], [16].”
BackgroundCoaxially wound transformers for high-power high-frequency applications
Kheraluwala, M. H., Novotny, D. W., & Divan, D. M. (1992) · IEEE Transactions on Power Electronics · doi:10.1109/63.124577 · Cited by 73 · cited 1×
“high-power ferrite core transformers in the literature [25], [26] with operating frequency higher than 20 kHz, power level higher”
BackgroundAbeywickrama, K. G. N. B., Daszczyński, T., Serdyuk, Y. V., & Gubanski, S. M. (2008) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2007.914857 · Cited by 69 · cited 2×
“Due to the variation of the permeability for different flux densities [10] and the complex permeability of silicon steel at evaluated frequencies [30], there is a variable and slight overestimation with IGSE for silicon steel core loss calculation.”
BackgroundHigh-Frequency Copper Losses in Magnetic Components With Layered Windings
Dimitrakakis, G. S., & Tatakis, E. C. (2009) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2009.2018624 · Cited by 58 · cited 1×
“The 2-D FE simulation achieves better accuracy compared with 1-D analytical models [31], [32].”
MethodAn actively cooled 120 kW coaxial winding transformer for fast charging electric vehicles
Klontz, K. W., Divan, D. M., & Novotny, D. W. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475695 · Cited by 58
Analytic Design Method Based on Homothetic Shape of Magnetic Cores for High-Frequency Transformers
Forest, F., Labouré, É., Meynard, T. A., & Arab, M. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.904251 · Cited by 55 · cited 1×
“Based on the area product [27], the relation between dimensional parameters and electromagnetic parameters can be expressed as”
BackgroundMedium frequency high power transformers, state of art and challenges
Agheb, E., & Høidalen, H. K. (2012) · International Conference on Renewable Energy Research and Applications (ICRERA) · doi:10.1109/icrera.2012.6477318 · Cited by 44 · cited 2×
“In mediumfrequency energy conversion systems, medium-frequency transformers (MFTs) are essential which provide voltage adaptation and isolation, clearly shown in the previous literature [1], [4]– [6], [8]–[10].”
BackgroundIron Loss Calculation in Steel Laminations at High Frequencies
Henrotte, F., Steentjes, S., Hameyer, K., & Geuzaine, C. (2014) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2013.2282830 · Cited by 40 · cited 1×
“Owing to the development of silicon steel processing technology, the eddy loss has been greatly reduced due to the thickness reduction of silicon steel sheet [10], [19], which has shown promise for high-density MFT design.”
BackgroundHigh-Frequency Proximity Losses Determination for Rectangular Cross-Section Conductors
Phung, A.-T., Meunier, G., Chadebec, O., Margueron, X., & Keradec, J. P. (2007) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2007.892303 · Cited by 40
Core Loss in Toroidal Cores Based on Fe-Based Amorphous Metglas 2605HB1 Alloy
Azuma, D., & Hasegawa, R. (2011) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2011.2152370 · Cited by 39 · cited 1×
“In [18], the effects of residual strain on loss increase were examined for toroidal cores based on Metglas 2605 HB1 alloy (amorphous material), and the results show that with the increase in the residual strain, core loss and hysteresis loss are increased.”
BackgroundLi, J., Water, W., Zhu, B., & Lu, J. (2015) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2014.2368123 · Cited by 34 · cited 2×
“According to Faraday’s law [24] and (2), Np and J can be respectively derived as a function of flux density Bm”
BackgroundWang, D., Mao, C., & Lu, J. (2008) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2007.905552 · Cited by 33 · cited 2×
“In mediumfrequency energy conversion systems, medium-frequency transformers (MFTs) are essential which provide voltage adaptation and isolation, clearly shown in the previous literature [1], [4]– [6], [8]–[10].”
BackgroundSelf-citationNardo, A. D., Capua, G. D., & Femia, N. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2193853 · Cited by 28 · cited 1×
“Reference [17] proposed a novel design method based on the use of geometric form factors of magnetic cores, ensuring compliance with the maximum loss budget and minimum core size goal, conversely, this paper is to ensure compliance with the maximum core size budget and minimum loss goal.”
MethodTian, J., Mao, C., Wang, D., Lu, J., Liang, X., & Liu, Y. (2015) · IET Electric Power Applications · doi:10.1049/iet-epa.2014.0287 · Cited by 20 · cited 3×
“As a kind of typical application of MFT, EPT [11], also called SST or PET, is a new family member of power transformer, which can provide high quality of electric energy to consumer and improve the dynamic performance and stability of the power grid by increasing system damping under disturbances.”
BackgroundSelf-citationThermal evaluation of a medium frequency transformer in a line side conversion system
Kjellqvist, T., Östlund, S., Norrga, S., & Ilves, K. (2009) · European Conference on Power Electronics and Applications · Cited by 15
Analysis of the Internal Electrical Characteristics of Electronic Power Transformers
Yang, Y., Mao, C., Wang, D., & Lu, J. (2013) · Journal of Power Electronics · doi:10.6113/jpe.2013.13.5.746 · Cited by 5 · cited 4×
“Generally, both sides of EPT are connected with power grid (active system), and they influence each other closely [12], except second harmonic ripple, harmonics with different frequencies from the power grid can also lead to the ripple in primary voltage of MFT.”
BackgroundSelf-citation
Cited by
Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters
Guo, Z., Yu, R., Xu, W., Feng, X., & Huang, A. Q. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3059879 · Cited by 115
“Previous research [11], [12], [15], [16] investigated the optimal design methodologies for MFTs.”
BackgroundChen, B., Liang, X., & Wan, N. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2987944 · Cited by 102
“[24] presented an optimal design method based on the optimal flux density to minimize the total loss to achieve a high efficiency design, and a 1.”
MethodRonanki, D., & Williamson, S. S. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2765518 · Cited by 90
“The comparative analysis of different core structures was carried out in [48], [50], and [51], and core type transformers are recommended for most MFT”
BackgroundMethodA Compact Modular Multilevel DC–DC Converter for High Step-Ratio MV and HV Use
Xiang, X., Zhang, X., Luth, T., Merlin, M., & Green, T. C. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2793249 · Cited by 76
Power electronic transformers: A review
Battal, F., Balcı, S., & Sefa, İ. (2020) · Measurement · doi:10.1016/j.measurement.2020.108848 · Cited by 79
Metadata
- Authors
- Huang, P., Mao, C., Wang, D., Wang, L., Duan, Y., Qiu, J., Xu, G., & Cai, H.
- Affiliations
- Huazhong University of Science and Technology (CN)
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2017-06
- Volume
- 64
- Issue
- 6
- Pages
- 4391-4401
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2589570930
- Cited by
- 78
- References
- 32
- Citations by year
- 2026: 2 · 2025: 5 · 2024: 4 · 2023: 14 · 2022: 10 · 2021: 11 · 2020: 12 · 2019: 9 · 2018: 8 · 2017: 3
- FWCI
- 3.64
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Industrial Electronics (publishedVersion)
- Funders
- National Natural Science Foundation of China (51277083, 51361130151)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetic Properties and Applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Keywords
- medium frequency transformer, silicon steel core, solid-state transformer, square wave excitation, winding losses, sideband harmonics, no-load losses, power density
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.