The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Hybrid Bidirectional Wireless EV Charging System Tolerant to Pad Misalignment
Abstract
Electric vehicles (EVs) are becoming increasingly popular as a means of future transport for sustainable living. However, wireless charging of EVs poses a number of challenges related to interoperability, safety, pad misalignment, etc. In particular, pad misalignments invariably cause changes in system parameters which in turn lead to increase in losses as well as reduction in power throughput, making the charging process long and inefficient. Consequently, wireless charging systems that are less sensitive to pad misalignments have become preferable. This paper, therefore, presents a hybrid wireless power transfer (WPT) system that charges EVs at constant rate despite large misalignments between charging pads. The proposed charging system uses a combination of two different resonant networks to realize a constant and efficient charging process. A mathematical model is also developed, showing as to how the two resonant networks can be combined to compensate for pad misalignments. To demonstrate the validity of the proposed concept as well as the accuracy of the mathematical model, theoretical performance is compared with both simulations and experimental results of a prototype 3.3 kW hybrid bidirectional WPT system. Results clearly indicate that the proposed hybrid WPT system is efficient and offers a constant charging profile over a wide range of spatial (three-dimensional) pad misalignments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Development of a Single-Sided Flux Magnetic Coupler for Electric Vehicle IPT Charging Systems
Budhia, M., Boys, J. T., Covic, G. A., & Huang, C.-Y. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2179274 · Cited by 1,273
A Double-Sided LCC Compensation Network and Its Tuning Method for Wireless Power Transfer
Li, S., Li, W., Deng, J., Nguyen, T. D., & Mi, C. C. (2015) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2014.2347006 · Cited by 1,091
A Bidirectional Inductive Power Interface for Electric Vehicles in V2G Systems
Madawala, U. K., & Thrimawithana, D. J. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2114312 · Cited by 813
Self-citationAdvances in Wireless Power Transfer Systems for Roadway-Powered Electric Vehicles
Choi, S. Y., Gu, B. W., Jeong, S. Y., & Rim, C. T. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2343674 · Cited by 682
A Frequency Control Method for Regulating Wireless Power to Implantable Devices
Si, P., Hu, A. P., Malpas, S., & Budgett, D. (2008) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2008.918284 · Cited by 582
A High Efficiency 5 kW Inductive Charger for EVs Using Dual Side Control
Wu, H. H., Gilchrist, A., Sealy, K. D., & Bronson, D. (2012) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2192283 · Cited by 512
Hui, S. Y. R., & Ho, W. W. C. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.846550 · Cited by 501
Qu, X., Han, H., Wong, S.-C., Tse, C. K., & Chen, W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2396471 · Cited by 474
High-Misalignment Tolerant Compensation Topology For ICPT Systems
Villa, J. L., Sallan, J., Sanz Osorio, J. F., & Llombart, A. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2161055 · Cited by 467
Cutting the Cord: Static and Dynamic Inductive Wireless Charging of Electric Vehicles
Lukic, S., & Pantic, Z. (2013) · IEEE Electrification Magazine · doi:10.1109/mele.2013.2273228 · Cited by 424
Zaheer, A., Hao, H., Covic, G. A., & Kacprzak, D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2329693 · Cited by 371
Multi-Objective Optimization of 50 kW/85 kHz IPT System for Public Transport
Bosshard, R., & Kolar, J. W. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2598755 · Cited by 317
10 kHz inductively coupled power transfer - concept and control
Green, A. W. (1994) · Proceedings of 5th International Conference on Power Electronics and Variable-Speed Drives · doi:10.1049/cp:19941049 · Cited by 300
Neath, M. J., Swain, A. K., Madawala, U. K., & Thrimawithana, D. J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2262953 · Cited by 256
Self-citationMiller, J. M., Onar, O. C., White, C., Campbell, S., Coomer, C., Seiber, L., Sepe, R., & Steyerl, A. (2014) · IEEE Power Electronics Magazine · doi:10.1109/mpel.2014.2300978 · Cited by 256
A Power–Frequency Controller for Bidirectional Inductive Power Transfer Systems
Madawala, U. K., Neath, M., & Thrimawithana, D. J. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2174537 · Cited by 232
Self-citationThe Inductive Power Transfer Story at the University of Auckland
Boys, J. T., & Covic, G. A. (2015) · IEEE Circuits and Systems Magazine · doi:10.1109/mcas.2015.2418972 · Cited by 149
Unplugged But Connected: Review of Contactless Energy Transfer Systems
Kaźmierkowski, M. P., & Moradewicz, A. J. (2012) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2012.2220869 · Cited by 144
Modeling Bidirectional Contactless Grid Interfaces With a Soft DC-Link
Weearsinghe, S., Thrimawithana, D. J., & Madawala, U. K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2347038 · Cited by 56
Self-citationReducing leakage flux in IPT systems by modifying pad ferrite structures
Lin, F. J., Zaheer, A., Budhia, M., & Covic, G. A. (2014) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2014.6953632 · Cited by 56
Analysis of mutually decoupled primary coils for IPT systems for EV charging
Kim, S., Tejeda, A., Covic, G. A., & Boys, J. T. (2016) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2016.7854877 · Cited by 31
Interoperable EV detection for dynamic wireless charging with existing hardware and free resonance
Kamineni, A., Covic, G. A., & Boys, J. T. (2016) · IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer · doi:10.1109/wow.2016.7772086 · Cited by 14
Cited by
Inductive Wireless Power Transfer Charging for Electric Vehicles—A Review
Mahesh, A., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3116678 · Cited by 513
Advances in High-Power Wireless Charging Systems: Overview and Design Considerations
Feng, H., Tavakoli, R., Onar, O. C., & Pantic, Z. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3012543 · Cited by 368
Coil Design for Wireless Vehicle-to-Vehicle Charging Systems
Mou, X., Gladwin, D. T., Zhao, R., Sun, H., & Yang, Z. (2020) · IEEE Access · doi:10.1109/access.2020.3025787 · Cited by 53
Metadata
- Authors
- Zhao, L., Thrimawithana, D. J., & Madawala, U. K.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2017-09
- Volume
- 64
- Issue
- 9
- Pages
- 7079-7086
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2599723101
- Cited by
- 328
- References
- 22
- FWCI
- 9.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.