A 98.3% Efficient GaN Isolated Bidirectional DC–DC Converter for DC Microgrid Energy Storage System Applications
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
This paper presents a novel 400 to 12 V isolated bidirectional dc-dc converter based on a phase-shift-controlled-modified dual-active-bridge power stage. The proposed converter consists of a half-bridge and center tap with active clamp circuit, which has promising performance for low-voltage high-current applications. 650 V gallium-nitride high electron mobility transistors are used on the high voltage side to avoid issues encountered using Si superjunction MOSFETs in phase-shift-controlled-bidirectional power conversions. The operation principle and power transfer characteristic are obtained based on a time-domain analysis of the inductor current. Design methodology and criteria and converter's efficiency analysis are discussed. Both the analysis and experiments verify that the proposed converter is capable of achieving low power loss and high power density in soft-switching and hard-switching modes. Experimental results are presented for a 1-kW, 400 V-to-12 V dc-dc prototype converter operating at 100 kHz switching frequency. A power density of 30 W/in3and a peak efficiency of 98.3% in a wide input/output voltage range are achieved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zhao, B., Song, Q., Liu, W., & Sun, Y. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2289913 · Cited by 1,886
The Future Renewable Electric Energy Delivery and Management (FREEDM) System: The Energy Internet
Huang, A. Q., Crow, M. L., Heydt, G. T., Zheng, J. P., & Dale, S. J. (2011) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2081330 · Cited by 1,463 · cited 1×
“1 shows a typical structure of a 400 V dc microgrid in a future distribution grid, in which an ESS can be used for peak shaving, uninterrupted power supply, and other intelligent dispatch applications [2].”
BackgroundSelf-citationEnergy Storage Systems for Transport and Grid Applications
Vazquez, S., Lukic, S. M., Galvan, E., Franquelo, L. G., & Carrasco, J. M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2076414 · Cited by 1,347
Venkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H. (2003) · 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings. · doi:10.1109/cipe.2002.1196712 · Cited by 1,145 · cited 4×
“[29] noted that the common method using fundamental harmonic approximation and the Steinmetz equation cannot lead to a good prediction because the rich harmonics in the inductor current generate considerable power loss, which cannot be neglected.”
BackgroundMethodInfluentialEfficiency-Optimized High-Current Dual Active Bridge Converter for Automotive Applications
Krismer, F., & Kolar, J. W. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2112312 · Cited by 747
Krismer, F., & Kolar, J. W. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2025284 · Cited by 470 · cited 2×
“Many loss models have been well organized and documented in publications [28]–[33].”
BackgroundInvestigations of 600-V GaN HEMT and GaN Diode for Power Converter Applications
Mitova, R., Ghosh, R., Mhaskar, U., Klikic, D., Wang, M.-X., & Dentella, A. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2286639 · Cited by 221 · cited 1×
“Many loss models have been well organized and documented in publications [28]–[33].”
BackgroundReusch, D., & Strydom, J. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2364799 · Cited by 148
Zhang, Z., Thomsen, O. C., & Andersen, M. A. E. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2134051 · Cited by 102 · cited 2×
“The converter has the potential ability to achieve higher power density because compact thermal and layout design becomes easier due to fewer power components [27].”
Background
Cited by
Hou, N., & Li, Y. W. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2927930 · Cited by 553
Min, J., & Ordonez, M. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3033982 · Cited by 152
“, chargers for energy storage systems in dc microgrid [9].”
BackgroundLiu, Y.-C., Chen, C., Chen, K.-D., Syu, Y.-L., & Dung, N. A. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2953117 · Cited by 61
Ma, X., Wang, P., Bi, H., & Wang, Z. (2020) · IEEE Access · doi:10.1109/access.2020.3007638 · Cited by 48
Metadata
- Authors
- Xue, F., Yu, R., & Huang, A. Q.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2017-11
- Volume
- 64
- Issue
- 11
- Pages
- 9094-9103
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2600934144
- Cited by
- 199
- References
- 9
- FWCI
- 10.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.