Contrastive Adversarial Domain Adaptation for Machine Remaining Useful Life Prediction
Open accessThe DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
Enabling precise forecasting of the remaining useful life (RUL) for machines can reduce maintenance cost, increase availability, and prevent catastrophic consequences. Data-driven RUL prediction methods have already achieved acclaimed performance. However, they usually assume that the training and testing data are collected from the same condition (same distribution or domain), which is generally not valid in real industry. Conventional approaches to address domain shift problems attempt to derive domain-invariant features, but fail to consider target-specific information, leading to limited performance. To tackle this issue, in this article, we propose a contrastive adversarial domain adaptation (CADA) method for cross-domain RUL prediction. The proposed CADA approach is built upon an adversarial domain adaptation architecture with a contrastive loss, such that it is able to take target-specific information into consideration when learning domain-invariant features. To validate the superiority of the proposed approach, comprehensive experiments have been conducted to predict the RULs of aeroengines across 12 cross-domain scenarios. The experimental results show that the proposed method significantly outperforms state-of-the-arts with over 21% and 38% improvements in terms of two different evaluation metrics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hochreiter, S., & Schmidhuber, J. (1997) · Neural Computation · doi:10.1162/neco.1997.9.8.1735 · Cited by 102,318
Pan, S. J., & Yang, Q. (2010) · IEEE Transactions on Knowledge and Data Engineering · doi:10.1109/tkde.2009.191 · Cited by 23,387
Representation Learning with Contrastive Predictive Coding
Oord, A. V. D., Li, Y., & Vinyals, O. (2018) · arXiv · doi:10.48550/arxiv.1807.03748 · Cited by 6,242
Adversarial Discriminative Domain Adaptation
Tzeng, E., Hoffman, J., Saenko, K., & Darrell, T. (2017) · 2017 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2017.316 · Cited by 5,154 · cited 2×
“While in [28], a typical GAN loss was employed with flipped labels to find domain-invariant features.”
MethodDeep learning and its applications to machine health monitoring
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.050 · Cited by 2,894 · cited 2×
“Deep learning approaches for RUL prediction can be categorized into feed-forward neural networks and recurrent neural networks [6].”
BackgroundSelf-citationMachinery health prognostics: A systematic review from data acquisition to RUL prediction
Lei, Y., Li, N., Guo, L., Li, N., Yan, T., & Lin, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.016 · Cited by 2,634 · cited 1×
“Furthermore, machine deterioration process may prolong up to years, which can also limit the availability of faulty data [16].”
BackgroundDeep domain confusion Maximizing for domain invariance
Tzeng, E., Hoffman, J., Zhang, N., Saenko, K., & Darrell, T. (2014) · arXiv · doi:10.48550/arxiv.1412.3474 · Cited by 2,285 · cited 3×
“In [25], the maximum mean discrepancy (MMD) metric was developed to mitigate the domain shift problem.”
MethodInfluentialDeep visual domain adaptation: A survey
Wang, M., & Deng, W. (2018) · Neurocomputing · doi:10.1016/j.neucom.2018.05.083 · Cited by 2,209
Damage propagation modeling for aircraft engine run-to-failure simulation
Saxena, A., Goebel, K., Simon, D., & Eklund, N. (2008) · 2008 International Conference on Prognostics and Health Management · doi:10.1109/phm.2008.4711414 · Cited by 1,954
Guo, L., Lei, Y., Xing, S., Yan, T., & Li, N. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2877090 · Cited by 1,234 · cited 2×
“Data-driven approaches can only work well under the following two main assumptions: training and testing data are collected under the same operating condition, and rich-labeled data are available for the RUL prediction task [13], [14].”
BackgroundMethodA review on the application of deep learning in system health management
Khan, S., & Yairi, T. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.024 · Cited by 1,133
Data-Efficient Image Recognition with Contrastive Predictive Coding
Hénaff, O. J., Srinivas, A., De Fauw, J., Razavi, A., Doersch, C., Eslami, S. M. A., & Oord, A. V. D. (2019) · arXiv · doi:10.48550/arxiv.1905.09272 · Cited by 1,014
On Learning Invariant Representation for Domain Adaptation
Zhao, H., Combes, R. T. D., Zhang, K., & Gordon, G. J. (2019) · arXiv · doi:10.48550/arxiv.1901.09453 · Cited by 134 · cited 1×
“However, only finding domain invariant features does not guarantee good performance on the target domain [20], [21].”
Background
Metadata
- Authors
- Ragab, M., Chen, Z., Wu, M., Foo, C. S., Kwoh, C. K., Yan, R., & Li, X.
- Venue
- IEEE Transactions on Industrial Informatics
- Published
- 2021-08
- Volume
- 17
- Issue
- 8
- Pages
- 5239-5249
- ISSN
- 1551-3203 (ISSN-L)
- 1941-0050
- OpenAlex
- W3094539536
- Cited by
- 195
- References
- 13
- FWCI
- 9.69
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.