The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Waalbot: An Agile Small-Scale Wall-Climbing Robot Utilizing Dry Elastomer Adhesives
Abstract
This paper proposes a small-scale agile wall-climbing robot, which is able to climb on smooth vertical surfaces using flat adhesive elastomer materials for attachment. Using two actuated legs with rotary motion and two passive revolute joints at each foot, this robot can climb and steer in any orientation. Due to its compact design, a high degree of miniaturization is possible. It has onboard power, computing, and wireless communication, which allow for semiautonomous operation. Various aspects of a functioning prototype design and performance are discussed in detail, including leg and foot design and gait dynamics. A model for the adhesion requirements and performance is developed and verified through experiments. Using an adhesive elastomer (Vytaflex 10), the current prototype can climb 90deg slopes at a speed of up to 6 cm/s and steer to any angle reliably on a smooth acrylic surface as well as transition from floor walking to wall climbing. This robot is intended for inspection and surveillance applications, and ultimately, for space missions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adhesive force of a single gecko foot-hair
Autumn, K., Liang, Y. A., Hsieh, S. T., Zesch, W., Chan, W. P., Kenny, T. W., Fearing, R., & Full, R. J. (2000) · Nature · doi:10.1038/35015073 · Cited by 2,758
Evidence for van der Waals adhesion in gecko setae
Autumn, K., Sitti, M., Liang, Y. A., Peattie, A. M., Hansen, W. R., Sponberg, S., Kenny, T. W., Fearing, R., Israelachvili, J. N., & Full, R. J. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.192252799 · Cited by 1,949
Self-citationMicrofabricated adhesive mimicking gecko foot-hair
Geim, A. K., Dubonos, S. V., Grigorieva, I. V., Novoselov, K. S., Zhukov, A. A., & Shapoval, S. Y. (2003) · Nature Materials · doi:10.1038/nmat917 · Cited by 1,329
Synthetic gecko foot-hair micro/nano-structures as dry adhesives
Sitti, M., & Fearing, R. S. (2003) · Journal of Adhesion Science and Technology · doi:10.1163/156856103322113788 · Cited by 494
Self-citationRHex: A Biologically Inspired Hexapod Runner
Altendorfer, R., Moore, N., Komsuoglu, H., Buehler, M., Brown, H. B., McMordie, D., Saranli, U., Full, R., & Koditschek, D. E. (2001) · Autonomous Robots · doi:10.1023/a:1012426720699 · Cited by 412
Design of biomimetic fibrillar interfaces: 1. Making contact
Glassmaker, N. J., Jagota, A., Hui, C.-Y., & Kim, J. (2004) · Journal of The Royal Society Interface · doi:10.1098/rsif.2004.0004 · Cited by 400
Adhesion of Biologically Inspired Vertical and Angled Polymer Microfiber Arrays
Aksak, B., Murphy, M. P., & Sitti, M. (2007) · Langmuir · doi:10.1021/la062697t · Cited by 314
Self-citationGecko Inspired Surface Climbing Robots
Menon, C., Murphy, M., & Sitti, M. (2005) · 2004 IEEE International Conference on Robotics and Biomimetics · doi:10.1109/robio.2004.1521817 · Cited by 227
Self-citationSpinybotII: climbing hard walls with compliant microspines
Kim, S., Asbeck, A. T., Cutkosky, M. R., & Provancher, W. R. (2006) · ICAR '05. Proceedings., 12th International Conference on Advanced Robotics, 2005. · doi:10.1109/icar.2005.1507470 · Cited by 205
Highly mobile and robust small quadruped robots
Morrey, J. M., Larribrecht, B., Horchler, A. D., Ritzmann, R. E., & Quinn, R. D. (2004) · Proceedings 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2003) (Cat. No.03CH37453) · doi:10.1109/iros.2003.1250609 · Cited by 195
Cited by
Waalbot II: Adhesion Recovery and Improved Performance of a Climbing Robot using Fibrillar Adhesives
Murphy, M. P., Kute, C., Mengüç, Y., & Sitti, M. (2011) · The International Journal of Robotics Research · doi:10.1177/0278364910382862 · Cited by 247
Self-citationThe Gecko’s Toe: Scaling Directional Adhesives for Climbing Applications
Hawkes, E. W., Eason, E. V., Asbeck, A. T., & Cutkosky, M. R. (2013) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2012.2209672 · Cited by 112
Microwedge Machining for the Manufacture of Directional Dry Adhesives
Day, P., Eason, E. V., Esparza, N., Christensen, D., & Cutkosky, M. (2013) · Journal of Micro and Nano-Manufacturing · doi:10.1115/1.4023161 · Cited by 112
A tailless timing belt climbing platform utilizing dry adhesives with mushroom caps
Krahn, J., Liu, Y., Sadeghi, A., & Menon, C. (2011) · Smart Materials and Structures · doi:10.1088/0964-1726/20/11/115021 · Cited by 67
Metadata
- Authors
- Murphy, M. P., & Sitti, M.
- Venue
- IEEE/ASME Transactions on Mechatronics
- Published
- 2007-06
- Volume
- 12
- Issue
- 3
- Pages
- 330-338
- ISSN
- 1083-4435 (ISSN-L)
- OpenAlex
- W2126978975
- Cited by
- 263
- References
- 19
- FWCI
- 8.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Waalbot: An Agile Small-Scale Wall-Climbing Robot Utilizing Dry Elastomer Adhesives. https://app.cochat.ai/papers/10.1109/tmech.2007.897277
- The paper
- Murphy, M. P., & Sitti, M. (2007). Waalbot: An Agile Small-Scale Wall-Climbing Robot Utilizing Dry Elastomer Adhesives. IEEE/ASME Transactions on Mechatronics. https://doi.org/10.1109/tmech.2007.897277
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.