A tailless timing belt climbing platform utilizing dry adhesives with mushroom caps
The DOI matches its Crossref record; 31 of the 33 references it cites were found in a registry or an index.
Abstract
In many instances, a climbing robot that utilizes dry adhesives as an attachment method may be found to be very useful due to the inherent nature of biomimetic fibrillar dry adhesives in the applications of space, security, surveillance and nuclear reactor cleaning and maintenance. In this paper, a novel tank-like modular robot is developed that does not require a tail to provide a preload to the front of the robot while climbing. Biomimetic fibrillar dry adhesives with mushroom caps manufactured into belts are used as an attachment method. The manufacturing of the dry adhesive belts is discussed and the adhesion properties are examined. The timing belt based climbing platform (TBCP-II) utilizes two tank-like modules connected with an active joint with continual surface–robot distance measuring providing feedback for active adhesive preloading. The mechanical, electronic and software design is discussed. Reliable vertical surface climbing is achieved and the preloading strategy and response is examined. TBCP-II is shown to be capable of both horizontal to vertical and vertical to horizontal surface transfers over both inside and outside corners.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Smooth Vertical Surface Climbing With Directional Adhesion
Kim, S., Spenko, M., Trujillo, S., Heyneman, B., Santos, D., & Cutkosky, M. R. (2008) · IEEE Transactions on Robotics · doi:10.1109/tro.2007.909786 · Cited by 661 · cited 1×
“Passive tails [26, 27, 31] are composed of a simple wire which is bent to contact the climbing surface and can be problematic during horizontal to vertical or vertical to horizontal surface transfer.”
BackgroundGecko‐Inspired Directional and Controllable Adhesion
Murphy, M. P., Aksak, B., & Sitti, M. (2009) · Small · doi:10.1002/smll.200801161 · Cited by 463
Biologically inspired climbing with a hexapedal robot
Spenko, M. J., Haynes, G. C., Saunders, J. A., Cutkosky, M. R., Rizzi, A. A., Full, R. J., & Koditschek, D. E. (2008) · Journal of Field Robotics · doi:10.1002/rob.20238 · Cited by 426
Prahlad, H., Pelrine, R., Stanford, S., Marlow, J., & Kornbluh, R. (2008) · 2008 IEEE International Conference on Robotics and Automation · doi:10.1109/robot.2008.4543670 · Cited by 278 · cited 3×
“Some common approaches for attachment of cleaning and inspection robots are suction cups [8], vacuum suction [9, 4, 10], magnets [1, 2, 11] spines or claws [5, 12] others have developed or utilized electroadhesives [13, 14], biomimetic adhesives [15, 16] or chemical adhesives [17].”
BackgroundWaalbot: An Agile Small-Scale Wall-Climbing Robot Utilizing Dry Elastomer Adhesives
Murphy, M. P., & Sitti, M. (2007) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2007.897277 · Cited by 263
Gecko Inspired Surface Climbing Robots
Menon, C., Murphy, M., & Sitti, M. (2005) · 2004 IEEE International Conference on Robotics and Biomimetics · doi:10.1109/robio.2004.1521817 · Cited by 227 · cited 5×
“Using scotch tape (3 M) to flatten the loop and ensure 3–4 cm of adhesive were in contact with the PMMA, PDMS mixed in a 10:1 ratio by weight of prepolymer to catalyst was poured over the 1 mm gap between the ends and cured for 3 h at 80 ◦C.”
BackgroundSelf-citationSky Cleaner 3: a real pneumatic climbing robot for glass-wall cleaning
Zhang, H., Zhang, J., Zong, G., Wang, W., & Liu, R. (2006) · IEEE Robotics & Automation Magazine · doi:10.1109/mra.2006.1598051 · Cited by 166
Gecko‐Inspired Dry Adhesive for Robotic Applications
Yu, J., Chary, S., Das, S., Tamelier, J., Pesika, N. S., Turner, K. L., & Israelachvili, J. N. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100493 · Cited by 158
Magnebike: A magnetic wheeled robot with high mobility for inspecting complex‐shaped structures
Tâche, F., Fischer, W., Caprari, G., Siegwart, R., Moser, R., & Francesco Mondada, C. (2009) · Journal of Field Robotics · doi:10.1002/rob.20296 · Cited by 147 · cited 2×
“Some common approaches for attachment of cleaning and inspection robots are suction cups [8], vacuum suction [9, 4, 10], magnets [1, 2, 11] spines or claws [5, 12] others have developed or utilized electroadhesives [13, 14], biomimetic adhesives [15, 16] or chemical adhesives [17].”
BackgroundDevelopment of a wall-climbing robot using a tracked wheel mechanism
Kim, H., Kim, D., Yang, H., Lee, K., Seo, K., Chang, D., & Kim, J. (2008) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-008-0413-x · Cited by 133 · cited 2×
“Some common approaches for attachment of cleaning and inspection robots are suction cups [8], vacuum suction [9, 4, 10], magnets [1, 2, 11] spines or claws [5, 12] others have developed or utilized electroadhesives [13, 14], biomimetic adhesives [15, 16] or chemical adhesives [17].”
BackgroundMethod
Research works printed but not linked: 12
- Tache F Fischer W Moser R Mondad F Siegart R, 2007, Proc. 2007 IEEE/ASME Int. Conf. on Adv. Intel. Mechatronics
- Luk B L Collie A A Cooke D S Chen S, 2005, Asia Pacific Conf. on Risk Management and Safety, 432
- Wile G D Datorio K A Diller D Palmer L R Gorb S N Ritzmann R E Quinn R D, 2008, IEEE/RSJ Int. Conf. on Intelligent Robots and Systems
- Zhu T Liu R Wang X D Wang K, 2006, Proc. 2006 IEEE Int. Conf. on Robotics and Biomimetics
- Xiao J Calle A Sadegh A Elliott M, 2005, IEEE Int. Conf. on Robotics And Biomimetics
- Bonaccorso F Bruno C Longo D Muscato G, 2008, 11th Int. Conf. on Climbing and Walking Robots and the Support Technologies for Mobile Machines 2008
- 10.1002/smll.200801161 · DOI · Paper page
- Menon C Murphey M Sitti M, 2004, Int. Conf. on Robot. and Biomim.
- Menon C Li Y Sameoto D Martens C, 2008, IEEE/RAS-EMBS Int. Conf. on Biomed. Robot. and Biomech.
- Li Y, 2011, Robotica
- Gittens C Goundar D Law D Minor J Menon C, 2010, IEEE/RA/EMB/IFMBE Int. Conf. on Apl. Bionics and Biomech.
- Greuter M, 2005, 3rd Int. Symp. on Autonomius Minirobots for Res. and Edu., 39
Cited by
Gu, G., Zou, J., Zhao, R., Zhao, X., & Zhu, X. (2018) · Science Robotics · doi:10.1126/scirobotics.aat2874 · Cited by 687
Nature-inspired adhesive systems
Li, M., Mao, A., Guan, Q., & Saiz, E. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00764b · Cited by 203
Stimuli-Responsive Reversible Two-Level Adhesion from a Structurally Dynamic Shape-Memory Polymer
Michal, B. T., Spencer, E. J., & Rowan, S. J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b01251 · Cited by 198
Engineering Micropatterned Dry Adhesives: From Contact Theory to Handling Applications
Hensel, R., Moh, K., & Arzt, E. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800865 · Cited by 195
Human climbing with efficiently scaled gecko-inspired dry adhesives
Hawkes, E. W., Eason, E. V., Christensen, D. L., & Cutkosky, M. R. (2015) · Journal of The Royal Society Interface · doi:10.1098/rsif.2014.0675 · Cited by 120
“Researchers have created small robots that climb well with dry adhesives [7–11],”
Background
Metadata
- Authors
- Krahn, J., Liu, Y., Sadeghi, A., & Menon, C.
- Affiliations
- Simon Fraser University (CA)
- ORCID
- Menon, C
- Venue
- Smart Materials and Structures
- Publisher
- IOP Publishing
- Published
- 2011-10-31
- Volume
- 20
- Issue
- 11
- Pages
- 115021
- ISSN
- 0964-1726 (ISSN-L)
- 1361-665X
- OpenAlex
- W2043375561
- Cited by
- 67
- References
- 33
- Citations by year
- 2025: 4 · 2024: 1 · 2023: 2 · 2022: 5 · 2021: 4 · 2020: 2 · 2019: 4 · 2018: 10 · 2017: 3 · 2016: 8 · 2015: 4 · 2014: 8 · 2013: 7 · 2012: 5
- FWCI
- 9.66
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Smart Materials and Structures (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions
- Physical Sciences › Engineering › Mechanical Engineering › Modular Robots and Swarm Intelligence
- Physical Sciences › Engineering › Control and Systems Engineering › Robotic Locomotion and Control
- Keywords
- climbing robot, dry adhesion, mushroom caps, fibrillar adhesives, timing belt, modular robots, biomimetic adhesives
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A tailless timing belt climbing platform utilizing dry adhesives with mushroom caps. https://app.cochat.ai/papers/10.1088/0964-1726/20/11/115021
- The paper
- Krahn, J., Liu, Y., Sadeghi, A., & Menon, C. (2011). A tailless timing belt climbing platform utilizing dry adhesives with mushroom caps. Smart Materials and Structures. https://doi.org/10.1088/0964-1726/20/11/115021
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.