The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Precision motion control for electro-hydraulic servo systems with noise alleviation, a desired compensation adaptive approach
Abstract
A desired compensation adaptive controller is proposed in this paper for precision motion control of electro-hydraulic servo systems, with consideration of the nonlinearity, modeling uncertainty, and especially the severe measurement noise arising from actual state feedbacks and deteriorating the control performance significantly. To alleviate the noise, actual states in the model-based compensation design are replaced with corresponding desired values. Considering that the general hydraulic system model contains unmatched modeling uncertainties (e.g., unmodeled nonlinear friction), an innovative approach to construct the desired values of the intermediate state variables is proposed in backstepping design procedure. It is then applied especially to the load pressure state, which appears in the system in a nonlinear way, and the discontinuous sign function is approximated by a continuous function to facilitate the controller design. As a result, the adaptive compensation and the regressor in the proposed controller depend on the desired trajectory and online parameter estimates only. Hence, the effect of measurement noise can be reduced and then high control performance is expected. Theoretical analysis reveals that the proposed controller can guarantee a prescribed transient performance and final tracking accuracy in the presence of both parametric uncertainties and uncertain nonlinearities. Moreover, it can guarantee the asymptotic tracking performance when subjected to parametric uncertainties only. Extensively comparative experimental results are obtained to verify the effectiveness of the proposed control strategy.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Unfortunately, the adaptive design process is usually required to be linearly parameterized with unknown constant parameters, which is not always satisfied for the complex EHSS.”
From Compensation Function Observer-Based Backstepping Sliding-Mode Control of Uncertain Electro-Hydraulic Servo System (2024) · cites this paper as [17]
Citations
Cites
Nonlinear and adaptive control design
Krstić, M., Kokotović, P. V., & Kanellakopoulos, I. (1995) · Cited by 10,421
Merritt, H. E., & Pomper, V. (1968) · Journal of Applied Mechanics · doi:10.1115/1.3601167 · Cited by 2,621
Dynamic surface control for a class of nonlinear systems
Swaroop, D., Hedrick, J. K., Yip, P. P., & Gerdes, J. C. (2000) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2000.880994 · Cited by 2,454
Adaptive dynamic surface control of nonlinear systems with unknown dead zone in pure feedback form
Zhang, T. P., & Ge, S. S. (2008) · Automatica · doi:10.1016/j.automatica.2007.11.025 · Cited by 752
Adaptive robust control of SISO nonlinear systems in a semi-strict feedback form
Yao, B., & Tomizuka, M. (1997) · Automatica · doi:10.1016/s0005-1098(96)00222-1 · Cited by 724
Yao, J., Jiao, Z., & Ma, D. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2304912 · Cited by 708
Self-citationAdaptive robust motion control of single-rod hydraulic actuators: theory and experiments
Yao, B., Bu, F., Reedy, J., & Chiu, G. T.-C. (2000) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/3516.828592 · Cited by 685
A Continuous Asymptotic Tracking Control Strategy for Uncertain Nonlinear Systems
Xian, B., Dawson, D. M., deQueiroz, M. S., & Chen, J. (2004) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2004.831148 · Cited by 651
Peng, Z., Wang, D., Chen, Z., Hu, X., & Lan, W. (2013) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2011.2181513 · Cited by 517
High-Accuracy Tracking Control of Hydraulic Rotary Actuators With Modeling Uncertainties
Yao, J., Jiao, Z., Ma, D., & Yan, L. (2013) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2013.2252360 · Cited by 511
Self-citation
Research works printed but not linked: 1
- khalil, 2002, Nonlinear Systems
Cited by
Deng, W., & Yao, J. (2019) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2019.2959297 · Cited by 281
Self-citationFinite-Time Continuous Terminal Sliding Mode Control of Servo Motor Systems
Hou, H., Yu, X., Xu, L., Rsetam, K., & Cao, Z. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2931517 · Cited by 265
Nonlinear Output Feedback Finite-Time Control for Vehicle Active Suspension Systems
Pan, H., & Sun, W. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2866518 · Cited by 247
Self-citationAdaptive RISE Control of Hydraulic Systems With Multilayer Neural-Networks
Yao, Z., Yao, J., & Sun, W. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2886773 · Cited by 228
Self-citationLiu, Z., Lin, W., Yu, X., Rodriguez-Andina, J. J., & Gao, H. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3137619 · Cited by 194
Metadata
- Authors
- Yao, J., Deng, W., & Sun, W.
- Affiliations
- Nanjing University of Science and Technology (CN)
- Harbin Institute of Technology (CN)
- Venue
- IEEE/ASME Transactions on Mechatronics
- Published
- 2017-08
- Volume
- 22
- Issue
- 4
- Pages
- 1859-1868
- ISSN
- 1083-4435 (ISSN-L)
- 1941-014X
- OpenAlex
- W2599233499
- Semantic Scholar
- dd5aea1676648770fcb43d5714c4f3752aba64f4
- Cited by
- 124
- References
- 35
- Citations by year
- 2026: 3 · 2025: 12 · 2024: 14 · 2023: 12 · 2022: 17 · 2021: 15 · 2020: 19 · 2019: 13 · 2018: 14 · 2017: 5
- FWCI
- 10.84
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE/ASME Transactions on Mechatronics (publishedVersion)
- Funders
- National Natural Science Foundation of China (51675279)
- Natural Science Foundation of Jiangsu Province in China (BK20141402)
- China Postdoctoral Science Foundation (2015T80553)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Hydraulic and Pneumatic Systems
- Physical Sciences › Engineering › Control and Systems Engineering › Adaptive Control of Nonlinear Systems
- Physical Sciences › Engineering › Mechanical Engineering › Control Systems in Engineering
- Keywords
- electro-hydraulic servo system, precision motion control, backstepping control, nonlinear friction compensation, parameter uncertainty, unmodeled nonlinearities, transient performance, tracking accuracy
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Precision motion control for electro-hydraulic servo systems with noise alleviation, a desired compensation adaptive approach. https://app.cochat.ai/papers/10.1109/tmech.2017.2688353
- The paper
- Yao, J., Deng, W., & Sun, W. (2017). Precision motion control for electro-hydraulic servo systems with noise alleviation, a desired compensation adaptive approach. IEEE/ASME Transactions on Mechatronics. https://doi.org/10.1109/tmech.2017.2688353
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.