The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
A Low-Power Nonvolatile Switching Element Based on Copper-Tungsten Oxide Solid Electrolyte
Abstract
We describe the materials aspects and electrical characteristics of$ W-( Cu/WO_3)- Cu$switching elements. These materials are compatible with back-end-of-line processing in CMOS integrated circuits where both tungsten and copper already play a significant role. Devices based on$ Cu/WO_3$solid electrolytes formed by photodiffusion of copper into tungsten oxide switch via the electrochemical formation of a conducting filament within the high resistance electrolyte film. They are able to switch reversibly between widely spaced nonvolatile resistance states at low voltage ($≪$1 V) and current$(≪10 muhbox A)$. Electrical characterization revealed that devices consisting of plasma-grown oxides have a variable initial threshold voltage and poor retention, whereas devices based on deposited oxide exhibit a stable switching threshold and good retention, even at elevated operating temperature$(≫125$$^circ C)$. This difference in behavior was attributed to the observation that the copper tends to oxidize in the plasma-grown oxide whereas the copper in the deposited oxide exists in an unbound state and is, therefore, more able to participate in the switching process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrical phenomena in amorphous oxide films
Dearnaley, G., Stoneham, A. M., & Morgan, D. V. (1970) · Reports on Progress in Physics · doi:10.1088/0034-4885/33/3/306 · Cited by 731 · cited 2×
“[ 8 ] G. Dearnaley, G. Stoneham, and D. V. Morgan, “Electrical phenomenon in amorphous oxide films,” Rep.”
Nanoscale Memory Elements Based on Solid-State Electrolytes
Kozicki, M. N., Park, M., & Mitkova, M. (2005) · IEEE Transactions On Nanotechnology · doi:10.1109/tnano.2005.846936 · Cited by 540 · cited 4×
“conventional nonvolatile memory technology [4], [5].”
InfluentialSelf-citation
Cited by
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Synaptic electronics: materials, devices and applications
Kuzum, D., Yu, S., & Philip Wong, H.-S. (2013) · Nanotechnology · doi:10.1088/0957-4484/24/38/382001 · Cited by 1,258
Electrochemical metallization memories—fundamentals, applications, prospects
Valov, I., Waser, R., Jameson, J. R., & Kozicki, M. N. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/25/254003 · Cited by 921
Self-citationRobust memristors based on layered two-dimensional materials
Wang, M., Cai, S., Pan, C., Wang, C., Lian, X., Zhuo, Y., Xu, K., Cao, T., Pan, X., Wang, B., et al. (2018) · Nature Electronics · doi:10.1038/s41928-018-0021-4 · Cited by 796
High switching endurance in TaOx memristive devices
Yang, J. J., Zhang, M.-X., Strachan, J. P., Miao, F., Pickett, M. D., Kelley, R. D., Medeiros-Ribeiro, G., & Williams, R. S. (2010) · Applied Physics Letters · doi:10.1063/1.3524521 · Cited by 637
Metadata
- Authors
- Kozicki, M. N., Gopalan, C., Balakrishnan, M., & Mitkova, M.
- Venue
- IEEE Transactions On Nanotechnology
- Published
- 2006-09
- Volume
- 5
- Issue
- 5
- Pages
- 535-544
- ISSN
- 1536-125X (ISSN-L)
- OpenAlex
- W2151835073
- Cited by
- 216
- References
- 2
- FWCI
- 14.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.