Power Electronics Cooling Effectiveness Versus Thermal Inertia
The DOI matches its Crossref record.
Abstract
Today, the popularity of power electronics integration is increasing. Despite the prospect of fully integrated module, including features like driving and control electronics, protection, power integration has not taken-off for medium to high power electronics applications. Manufacturing issues such as yield, reliability and return-on-investment for a new fabrication line are the major blocking points. As a first step toward integrated modules, integration of the cooling system appears realistic and cost effective. Increasing the cooling effectiveness could double the output current of an inverter while using the same amount of silicon. On the other hand, integrated cooling leads to small thermal inertia, which can generate high temperature variation under load cycling condition. This paper highlights the relationship between cooling effectiveness and thermal inertia. Typical performances of several cooling systems are compared under load cycling condition to explain how to take into account the variation of the losses in the choice of a cooling technique at the design stage. As an example, a standard liquid cooled plate performed similar to an integrated microchannel network for specific load variation frequencies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
On-chip cooling by superlattice-based thin-film thermoelectrics
Chowdhury, I., Prasher, R., Lofgreen, K., Chrysler, G., Narasimhan, S., Mahajan, R., Koester, D., Alley, R., & Venkatasubramanian, R. (2009) · Nature Nanotechnology · doi:10.1038/nnano.2008.417 · Cited by 821
A review of phase change materials for vehicle component thermal buffering
Jankowski, N. R., & McCluskey, F. P. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.08.026 · Cited by 480
Bottrell, N., & Green, T. C. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2279162 · Cited by 311
Transient Thermal Performance of IGBT Power Modules Attached by Low-Temperature Sintered Nanosilver
Chen, G., Han, D., Mei, Y.-H., Cao, X., Wang, T., Chen, X., & Lu, G.-Q. (2012) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2011.2173573 · Cited by 71
Understanding the Thermal Characteristics of SiC Power MOSFET Device for Power Modules Design
Cui, H., Li, B., Kong, H., Yang, F., Wang, F., Wang, L., & Gao, K. (2023) · 2023 IEEE 14th International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg56097.2023.10215269 · Cited by 8
“Nevertheless, this will greatly diminish the heat capacity of the power modules [10], which is equally important with thermal resistance and thermal stress.”
BackgroundMeasurement of thermal diffusivity with a modified Angstrom method
Piva, S. (2025) · Journal of Physics: Conference Series · doi:10.1088/1742-6596/2940/1/012014 · Cited by 3
Metadata
- Authors
- Meysenc, L., Jylhakallio, M., & Barbosa, P.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2005-05
- Volume
- 20
- Issue
- 3
- Pages
- 687-693
- ISSN
- 0885-8993 (ISSN-L)
- OpenAlex
- W2102040564
- Cited by
- 64
- References
- 0
- FWCI
- 1.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.