The DOI matches its Crossref record.
Making the case for applications of switched reluctance motor technology in automotive products
Abstract
Switched reluctance machines (SRM) offer attractive attributes for automotive applications. These include robustness to harsh operational conditions, rugged structure, fault resilient performance, and a wide range of speed. The main debate over the adequacy of switched reluctance drives in automotive applications has often focused on efficiency and position sensorless control over the entire speed range, adaptation of control algorithms in the presence of parameter variations, and high levels of acoustic noise and vibration. The present paper demonstrates three key technologies developed over the past few years that have resulted in tangible improvements in the performance of SRM/generators (SRM/G) as related to the above areas of interest. This paper intends to illustrate the new possibilities and remaining challenges in applications of SRM in automotive industry. The proposed technologies have been validated by simulation and experimental results
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Electrical Machines and Drives for Electric, Hybrid, and Fuel Cell Vehicles
Zhu, Z. Q., & Howe, D. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2006.892482 · Cited by 1,547
Making the Case for Electrified Transportation
Bilgin, B., Magne, P., Malysz, P., Yang, Y., Pantelic, V., Preindl, M., Korobkine, A., Jiang, W., Lawford, M., & Emadi, A. (2015) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2015.2437338 · Cited by 455
“Using advanced design and control techniques, torque ripples, noise, and vibration in SRM can be reduced [32]–[34].”
BackgroundSelf-citationGrid-Connected Integrated Battery Chargers in Vehicle Applications: Review and New Solution
Haghbin, S., Lundmark, S., Alakula, M., & Carlson, O. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2187414 · Cited by 345
An Extended-Speed Low-Ripple Torque Control of Switched Reluctance Motor Drives
Ye, J., Bilgin, B., & Emadi, A. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2316272 · Cited by 277
Self-citationDesai, P. C., Krishnamurthy, M., Schofield, N., & Emadi, A. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2034678 · Cited by 263
Self-citationMMC-Based SRM Drives With Decentralized Battery Energy Storage System for Hybrid Electric Vehicles
Gan, C., Sun, Q., Wu, J., Kong, W., Shi, C., & Hu, Y. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2846622 · Cited by 147
Metadata
- Authors
- Krishnamurthy, M., Edrington, C. S., Emadi, A., Asadi, P., Ehsani, M., & Fahimi, B.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2006-05
- Volume
- 21
- Issue
- 3
- Pages
- 659-675
- ISSN
- 0885-8993 (ISSN-L)
- OpenAlex
- W2112775049
- Cited by
- 242
- References
- 0
- FWCI
- 10.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.