Application of Kalman Filter to Estimate Junction Temperature in IGBT Power Modules
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Knowledge of instantaneous junction temperature is essential for effective health management of power converters, enabling safe operation of the power semiconductors under all operating conditions. Methods based on fixed thermal models are typically unable to compensate for degradation of the thermal path resulting from aging and the effect of variable cooling conditions. Thermosensitive electrical parameters (TSEPs), on the other hand, can give an estimate of junction temperature TJ, but measurement inaccuracies and the masking effect of varying operating conditions can corrupt the estimate. This paper presents a robust and noninvasive real-time estimate of junction temperature that can provide enhanced accuracy under all operating and cooling conditions when compared to model-based or TSEP-based methods alone. The proposed method uses a Kalman filter to fuse the advantages of model-based estimates and an online measurement of TSEPs. Junction temperature measurements are obtained from an online measurement of the on-state voltage, VCE (ON), at high current and processed by a Kalman filter, which implements a predict-correct mechanism to generate an adaptive estimate of TJ. It is shown that the residual signal from the Kalman filter may be used to detect changes in thermal model parameters, thus allowing the assessment of thermal path degradation. The algorithm is implemented on a full-bridge inverter and the results verified with an IR camera.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Condition Monitoring for Device Reliability in Power Electronic Converters: A Review
Yang, S., Xiang, D., Bryant, A., Mawby, P., Ran, L., & Tavner, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2049377 · Cited by 1,278 · cited 1×
“According to [10], the accuracy of the junction temperature estimate should be within 1 °C for successful application in condition monitoring.”
Background
Cited by
Choi, S., Haque, M. S., Tarek, M. T. B., Mulpuri, V., Duan, Y., Das, S., Garg, V., Ionel, D. M., Masrur, M. A., Mirafzal, B., et al. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2819627 · Cited by 192
Methodology for Active Thermal Cycle Reduction of Power Electronic Modules
van der Broeck, C. H., Ruppert, L. A., Lorenz, R. D., & De Doncker, R. W. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2882184 · Cited by 85
“[44], [47], matrix transfer function models [43], or state-space models [48], could be used for the observer-based active thermal cycle reduction that is discussed in this paper.”
MethodThermal Parameter and State Estimation for Digital Twins of E-Powertrain Components
Rodriguez, B., Sanjurjo, E., Tranchero, M., Romano, C., & Gonzalez, F. (2021) · IEEE Access · doi:10.1109/access.2021.3094312 · Cited by 49
Thermal Digital Twin of Power Electronics Modules for Online Thermal Parameter Identification
Kuprat, J., Debbadi, K., Schaumburg, J., Liserre, M., & Langwasser, M. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3328219 · Cited by 39
Tang, Y., Zhan, C., Zhu, L., Wang, W., Gou, Y., & Ji, S. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3470907 · Cited by 18
“In contrast, the RC lumped thermal models (LTMs), namely, the Foster model [12] and the Cauer model [13], are superior in high computational efficiency.”
Metadata
- Authors
- Eleffendi, M. A., & Johnson, C. M.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2016-02
- Volume
- 31
- Issue
- 2
- Pages
- 1576-1587
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2028810166
- Cited by
- 175
- References
- 1
- FWCI
- 8.02
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Application of Kalman Filter to Estimate Junction Temperature in IGBT Power Modules. https://app.cochat.ai/papers/10.1109/tpel.2015.2418711
- The paper
- Eleffendi, M. A., & Johnson, C. M. (2016). Application of Kalman Filter to Estimate Junction Temperature in IGBT Power Modules. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2015.2418711
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.