Thermal Digital Twin of Power Electronics Modules for Online Thermal Parameter Identification
The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Abstract
The assessment of the state of health of power semiconductors and the use of thermal observers rely on precise knowledge of the thermal impedance of the device, which is hard to monitor online with state-of-the-art approaches. This work proposes thermal digital twins (DTs), which create a real-time-capable digital replica of the physical thermal behavior and enable monitoring the thermal impedance online. The particle swarm optimization (PSO) algorithm and the dual extended Kalman filter (DEKF) are used to extract the thermal model for online monitoring. This is demonstrated for both approaches via a real-time simulation (RTS) where the reference chip temperature is given by a digital thermal model. A comparison of the approaches is given and the DEKF-based approach is chosen for the implementation of a multichip model with thermal cross-coupling. The convergence of the DEKF-based DTs is experimentally validated in the laboratory.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Digital Twin in Industry: State-of-the-Art
Tao, F., Zhang, H., Liu, A., & Nee, A. Y. C. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2873186 · Cited by 5,871 · cited 2×
“Against this background, the concept of digital twins (DTs) is of increasing importance, both in academia and industry [17].”
BackgroundOverview of Control and Grid Synchronization for Distributed Power Generation Systems
Blaabjerg, F., Teodorescu, R., Liserre, M., & Timbus, A. V. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.881997 · Cited by 5,220
Self-citationThe Digital Twin Paradigm for Future NASA and U.S. Air Force Vehicles
Glaessgen, E., & Stargel, D. (2012) · 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA · doi:10.2514/6.2012-1818 · Cited by 3,395 · cited 1×
“With various definitions of DT [17], [18], the DT refers to a digital replica in real-time that reflects a physical system.”
BackgroundReliability of Capacitors for DC-Link Applications in Power Electronic Converters—An Overview
Wang, H., & Blaabjerg, F. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2014.2308357 · Cited by 1,384
Transitioning to Physics-of-Failure as a Reliability Driver in Power Electronics
Wang, H., Liserre, M., Blaabjerg, F., de Place Rimmen, P., Jacobsen, J. B., Kvisgaard, T., & Landkildehus, J. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2290282 · Cited by 693 · cited 1×
“The reliability of the devices is, therefore, of significant relevance [2], with emphasis on the thermal stress of power semiconductors and capacitors [3], [4].”
BackgroundSelf-citationThermal Management on IGBT Power Electronic Devices and Modules
Qian, C., Gheitaghy, A. M., Fan, J., Tang, H., Sun, B., Ye, H., & Zhang, G. (2018) · IEEE Access · doi:10.1109/access.2018.2793300 · Cited by 342
A Digital Twin Based Estimation Method for Health Indicators of DC–DC Converters
Peng, Y., Zhao, S., & Wang, H. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3009600 · Cited by 305
A Review of the Condition Monitoring of Capacitors in Power Electronic Converters
Soliman, H., Wang, H., & Blaabjerg, F. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2591906 · Cited by 285
Reliability Improvement of Power Converters by Means of Condition Monitoring of IGBT Modules
Choi, U.-M., Blaabjerg, F., Jorgensen, S., Munk-Nielsen, S., & Rannestad, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2633578 · Cited by 211
Real-Time Compact Thermal Models for Health Management of Power Electronics
Musallam, M., & Johnson, C. M. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2040634 · Cited by 196
Research works printed but not linked: 2
- Drofenik, Modelling the thermal coupling between internal power semiconductor dies of a water-cooled 3300V/1200A HiPak IGBT module, 1
- Degrenne, Experimentally-validated models of on-state voltage for remaining useful life estimation and design for reliability of power modules, 1
Cited by
Implementation of a 6U CubeSat Electrical Power System Digital Twin
Casado, P., Torres, C., Blanes, J. M., Garrigós, A., & Marroquí, D. (2024) · Aerospace · doi:10.3390/aerospace11080688 · Cited by 13
“A DT is a virtual representation of a physical system, enabling engineers to simulate different scenarios in real time, monitor its performance, and optimize its operation throughout its lifecycle [7,8].”
Background
Metadata
- Authors
- Kuprat, J., Debbadi, K., Schaumburg, J., Liserre, M., & Langwasser, M.
- Affiliations
- Christian-Albrechts-Universität zu Kiel (DE)
- Fraunhofer Institute for Silicon Technology (DE)
- Venue
- IEEE Journal of Emerging and Selected Topics in Power Electronics
- Published
- 2024-02
- Volume
- 12
- Issue
- 1
- Pages
- 1020-1029
- ISSN
- 2168-6777 (ISSN-L)
- 2168-6785
- OpenAlex
- W4387986919
- Cited by
- 39
- References
- 30
- Citations by year
- 2026: 12 · 2025: 16 · 2024: 11
- FWCI
- 2.90
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Journal of Emerging and Selected Topics in Power Electronics (publishedVersion)
- Fraunhofer-Publica (Fraunhofer-Gesellschaft) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Control and Systems Engineering › Control Systems and Identification
- Keywords
- power modules, particle swarm optimization, dual extended Kalman filter, thermal modeling, real-time simulation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal Digital Twin of Power Electronics Modules for Online Thermal Parameter Identification. https://app.cochat.ai/papers/10.1109/jestpe.2023.3328219
- The paper
- Kuprat, J., Debbadi, K., Schaumburg, J., Liserre, M., & Langwasser, M. (2024). Thermal Digital Twin of Power Electronics Modules for Online Thermal Parameter Identification. IEEE Journal of Emerging and Selected Topics in Power Electronics. https://doi.org/10.1109/jestpe.2023.3328219
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.