IGBT Junction Temperature Measurement via Peak Gate Current
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
An electrical method for junction temperature measurement of MOS-gated power semiconductor devices is presented. The measurement method involves detecting the peak voltage over the external gate resistor of an insulated-gate bipolar transistor or MOSFET during turn-on. This voltage is directly proportional to the peak gate current, and fluctuates with temperature due to the temperature-dependent resistance of the internal gate resistance. Primary advantages of the method include an immunity to load current variation, and a good linear relationship with temperature. A measurement circuit can be integrated into a gate driver with no disruption to operation and allows autonomous measurements controlled directly via the gate signal. Advantages and disadvantages of the method are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Smet, V., Forest, F., Huselstein, J.-J., Rashed, A., & Richardeau, F. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2196894 · Cited by 232 · cited 1×
“ditions [18], [19].”
Cited by
A Digital Twin Based Estimation Method for Health Indicators of DC–DC Converters
Peng, Y., Zhao, S., & Wang, H. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3009600 · Cited by 305
Real-Time Measurement of Temperature Sensitive Electrical Parameters in SiC Power MOSFETs
Griffo, A., Wang, J., Colombage, K., & Kamel, T. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2739687 · Cited by 175
“A number of studies have been published on the use of TSEPs for silicon (Si) MOSFETs and insulated gate bipolar transistors (IGBTs) power devices, including the monitoring of dI/dt during turn-ON or dV/dt during turn-OFF transients [14]–[16], Miller capacitance discharge time [17], threshold voltage [18]–[20], ON-stat…”
BackgroundAC Power Cycling Test Setup and Condition Monitoring Tools for SiC-Based Traction Inverters
Farhadi, M., Vankayalapati, B. T., Sajadi, R., & Akin, B. (2023) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2023.3271251 · Cited by 24
SiC Device Junction Temperature Online Monitoring
Wang, R., Sabate, J., Mainali, K., Sadilek, T., Losee, P., & Singh, Y. (2018) · 2018 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8558298 · Cited by 19
Metadata
- Authors
- Baker, N., Munk-Nielsen, S., Iannuzzo, F., & Liserre, M.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2016-05
- Volume
- 31
- Issue
- 5
- Pages
- 3784-3793
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2205144585
- Cited by
- 166
- References
- 1
- FWCI
- 4.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.