Avoiding Divergent Oscillation of a Cascode GaN Device Under High-Current Turn-Off Condition
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The cascode structure is widely used for high-voltage normally-on GaN devices. However, the capacitance mismatch between the high-voltage GaN device and the low-voltage normally-off Si MOSFET may induce several undesired features, such as Si MOSFET reaches avalanche during turn-off and the high-voltage GaN device loses zero-voltage switching turn-on condition internally during a soft-switching turn-on process in every switching cycle. This paper presents another issue associated with the capacitance mismatch in the cascode GaN devices. Divergent oscillation could occur at high-current turn-off condition and, eventually, destroys the device. The intrinsic reason of this phenomenon is analyzed in detail in this paper. A simple solution is proposed by adding an additional capacitor whose position is critical and should be optimized. Experimental results validate the theoretical analysis and show that the proposed method improves device performance significantly under high-current turn-off condition.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Investigations of 600-V GaN HEMT and GaN Diode for Power Converter Applications
Mitova, R., Ghosh, R., Mhaskar, U., Klikic, D., Wang, M.-X., & Dentella, A. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2286639 · Cited by 221
Dynamic performances of GaN-HEMT on Si in cascode configuration
Hirose, T., Imai, M., Joshin, K., Watanabe, K., Ogino, T., Miyazaki, Y., Shono, K., Hosoda, T., & Asai, Y. (2014) · 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014 · doi:10.1109/apec.2014.6803306 · Cited by 38
Cited by
Stability, Reliability, and Robustness of GaN Power Devices: A Review
Kozak, J. P., Zhang, R., Porter, M., Song, Q., Liu, J., Wang, B., Wang, R., Saito, W., & Zhang, Y. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3266365 · Cited by 441
A Survey of EMI Research in Power Electronics Systems With Wide-Bandgap Semiconductor Devices
Zhang, B., & Wang, S. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2953730 · Cited by 367
Wang, H., Wei, J., Xie, R., Liu, C., Tang, G., & Chen, K. J. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2610460 · Cited by 283
A review on the GaN-on-Si power electronic devices
Zhong, Y., Zhang, J., Wu, S., Jia, L., Yang, X., Liu, Y., Zhang, Y., & Sun, Q. (2022) · Fundamental Research · doi:10.1016/j.fmre.2021.11.028 · Cited by 216
“Additionally, the capacitive mismatch will lead to extra power loss in the soft switching process of Cascode devices [31] .”
BackgroundComparison of Wide-Band-Gap Technologies for Soft-Switching Losses at High Frequencies
Jafari, A., Nikoo, M. S., Perera, N., Yildirim, H. K., Karakaya, F., Soleimanzadeh, R., & Matioli, E. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2990628 · Cited by 92
Metadata
- Authors
- Huang, X., Du, W., Lee, F. C., Li, Q., & Zhang, W.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2017-01
- Volume
- 32
- Issue
- 1
- Pages
- 593-601
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2344656427
- Cited by
- 57
- References
- 2
- FWCI
- 3.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Avoiding Divergent Oscillation of a Cascode GaN Device Under High-Current Turn-Off Condition. https://app.cochat.ai/papers/10.1109/tpel.2016.2532799
- The paper
- Huang, X., Du, W., Lee, F. C., Li, Q., & Zhang, W. (2017). Avoiding Divergent Oscillation of a Cascode GaN Device Under High-Current Turn-Off Condition. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2016.2532799
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.