Single-Pulse Avalanche Mode Robustness of Commercial 1200 V/80 mΩ SiC MOSFETs
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Commercialization of 1200-V silicon carbide (SiC) MOSFET has enabled power electronic design with improved efficiency as well as increased power density. High-voltage spikes induced in applications such as solenoid control, solid-state transformer, boost converter, and flyback converter can drive the MOSFET into avalanche mode operation due to high di/dt coupled with parasitic inductance. Avalanche mode operation is characterized by high-power dissipation within the device due to the high voltage and current crossover. This study focuses on the evaluation of two commercially available SiC MOSFETs from different manufacturers, each rated for 1200 V with an ON-state resistance of 80 mΩ, during unclamped inductive switching (UIS) mode operation. To determine device reliability, a decoupled UIS testbed was developed to evaluate the avalanche energy robustness at 22 °C and 125 °C during two specific conditions: high current and low energy, and low current and high energy. The SiC MOSFETs were evaluated using a load inductance of 1.42, 5.1, 10.5, and 15.8 mH to understand the effect of current and avalanche energy on device failure. To correlate the experimental results with the failure mechanism, estimated junction temperature and static device characteristics are presented; additionally, MOSFETs were decapsulated to examine the failure sites on the semiconductor die.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Silicon carbide benefits and advantages for power electronics circuits and systems
Elasser, A., & Chow, T. P. (2002) · Proceedings of the IEEE · doi:10.1109/jproc.2002.1021562 · Cited by 537
Influences of Device and Circuit Mismatches on Paralleling Silicon Carbide MOSFETs
Li, H., Munk-Nielsen, S., Wang, X., Maheshwari, R., Beczkowski, S., Uhrenfeldt, C., & Franke, W.-T. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2408054 · Cited by 306 · cited 1×
“2621099 ability to operate at high-switching frequency [13]–[17].”
BackgroundPower Cycling Reliability of Power Module: A Survey
Durand, C., Klingler, M., Coutellier, D., & Naceur, H. (2016) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2016.2516044 · Cited by 239 · cited 1×
“One of the momentous breakthroughs in SiC technology is the development of the high-voltage MOSFET; as SiC fabrication continues to evolve, increased power density and reduced switching and conduction losses can be realized by the replacement of Si devices with SiC devices [9]–[12].”
Background
Cited by
Review and analysis of SiC MOSFETs’ ruggedness and reliability
Wang, J., & Jiang, X. (2020) · IET Power Electronics · doi:10.1049/iet-pel.2019.0587 · Cited by 221
Power device breakdown mechanism and characterization: review and perspective
Zhang, R., & Zhang, Y. (2023) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/acb365 · Cited by 40
1200-V SiC MOSFET Short-Circuit Ruggedness Evaluation and Methods to Improve Withstand Time
Xing, D., Hu, B., Kang, M., Zhang, Y., Nayak, S., Wang, J., & Agarwal, A. K. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3144995 · Cited by 33
Metadata
- Authors
- Kelley, M. D., Pushpakaran, B. N., & Bayne, S. B.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2017-08
- Volume
- 32
- Issue
- 8
- Pages
- 6405-6415
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2532939099
- Cited by
- 108
- References
- 3
- FWCI
- 4.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.