Active Power Device Selection in High- and Very-High-Frequency Power Converters
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
This paper aims to provide a road map for selecting power devices in soft-switched, megahertz (MHz) frequency power converters. Minimizing COSSlosses, which occur when charging and discharging the parasitic output capacitor of power semiconductors, is critical to efficient operation. These losses are excluded from manufacturer-provided information, and measurements are either sparse or not reported at all in the existing literature. We report the first high-frequency COSSloss data from silicon carbide (SiC) power MOSFETs, with a range of devices tested from 1 to 35 MHz and up to 800 V. In contrast to GaN HEMTs, COSSlosses in SiC MOSFETs do not increase with dV/dt at these frequencies. A total of 3%-10% of the stored energy is dissipated in the measured SiC MOSFETs. We report new COSSloss measurements for vertical silicon MOSFETs and expand on existing measurements for superjunctions, finding high variance in COSSlosses between devices for both constructions. High COSSlosses preclude the tested silicon MOSFETs from efficient operation at MHz frequencies. Lastly, we compare devices in soft-switched applications using a loss calculation that includes these COSS losses, and demonstrate a 100 W, 17 MHz dc-RF inverter using a custom-packaged SiC MOSFET.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Comparison of Wide-Bandgap Semiconductors for Power Electronics Applications
Ozpineci, B. (2004) · doi:10.2172/885849 · Cited by 186
Reusch, D., & Strydom, J. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2364799 · Cited by 148
Cited by
Stability, Reliability, and Robustness of GaN Power Devices: A Review
Kozak, J. P., Zhang, R., Porter, M., Song, Q., Liu, J., Wang, B., Wang, R., Saito, W., & Zhang, Y. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3266365 · Cited by 441
Comparison of Wide-Band-Gap Technologies for Soft-Switching Losses at High Frequencies
Jafari, A., Nikoo, M. S., Perera, N., Yildirim, H. K., Karakaya, F., Soleimanzadeh, R., & Matioli, E. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2990628 · Cited by 92
Switching losses in power devices: From dynamic on resistance to output capacitance hysteresis
Matioli, E., Zhu, H., Perera, N., Nikoo, M. S., Jafari, A., & van Erp, R. (2023) · 2023 25th European Conference on Power Electronics and Applications (EPE'23 ECCE Europe) · doi:10.23919/epe23ecceeurope58414.2023.10264510 · Cited by 6
Metadata
- Authors
- Zulauf, G., Tong, Z., Plummer, J. D., & Rivas-Davila, J. M.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2019-07
- Volume
- 34
- Issue
- 7
- Pages
- 6818-6833
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2896416643
- Cited by
- 91
- References
- 2
- FWCI
- 4.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Active Power Device Selection in High- and Very-High-Frequency Power Converters. https://app.cochat.ai/papers/10.1109/tpel.2018.2874420
- The paper
- Zulauf, G., Tong, Z., Plummer, J. D., & Rivas-Davila, J. M. (2019). Active Power Device Selection in High- and Very-High-Frequency Power Converters. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2018.2874420
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.