Stability of a dc Distribution System for Power System Integration of Plug-In Hybrid Electric Vehicles
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
This paper proposes a method for enhancing the stability of a dc distribution system that integrates plug-in hybrid electric vehicles (PHEVs) with an ac power grid. The dc distribution system is interfaced with the host ac grid via a voltage-sourced converter and can also embed photovoltaic (PV) modules. Thus, bidirectional dc-dc electronic power converters act as battery chargers and interface the PHEVs with the dc distribution system, while PV modules are interfaced with the dc distribution system via unidirectional dc-dc converters. The dc distribution system is expected to be more efficient and economical than a system of ac-dc battery chargers directly interfaced with an ac grid, but it is prone to instabilities due to the constant-power property of the dc-dc converters. Using a nonlinear control strategy, the proposed stability enhancement method mitigates the issue of instability by altering the power setpoints of the battery chargers, bidirectional dc-dc converters, without a need for changing system parameters or hardware. The paper presents mathematical models for the original and modified systems and demonstrates that the proposed technique expands the stable operating region of the dc distribution system. Simulation results demonstrate the effectiveness of the proposed method for a study system in the PSCAD/EMTDC software environment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118 · cited 1×
“In most proposed integration strategies, ac–dc powerelectronic converters act as the battery chargers and are directly interfaced with the power grid [8]-[9].”
BackgroundThe Impact of Charging Plug-In Hybrid Electric Vehicles on a Residential Distribution Grid
Clement-Nyns, K., Haesen, E., & Driesen, J. (2010) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2009.2036481 · Cited by 2,847
Khaligh, A., & Dusmez, S. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2213104 · Cited by 630
Du, Y., Zhou, X., Bai, S., Lukic, S., & Huang, A. (2010) · 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2010.5433359 · Cited by 314 · cited 1×
“As a perceived technically and economically superior alternative, dc distribution systems have recently been proposed in which dc–dc converters act as the battery charges [10]–[14], especially for public areas.”
BackgroundReview of high power isolated bi-directional DC-DC converters for PHEV/EV DC charging infrastructure
Du, Y., Lukic, S., Jacobson, B., & Huang, A. (2011) · 2011 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2011.6063818 · Cited by 218
Cited by
Tavakoli, A., Saha, S., Arif, M. T., Haque, M. E., Mendis, N., & Oo, A. M. T. (2020) · IET Energy Systems Integration · doi:10.1049/iet-esi.2019.0047 · Cited by 326
Gao, F., Bozhko, S., Asher, G., Wheeler, P., & Patel, C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2510285 · Cited by 195
“DC distribution systems are being widely considered not only for MEA, but also for ground vehicles, ships, and terrestrial microgrids [10]–[13].”
BackgroundWang, Y., Song, Q., Zhao, B., Li, J., Sun, Q., & Liu, W. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2772833 · Cited by 71
“Besides, the dc distribution network has higher power conversion efficiency, and its transmission power quality can be improved effectively [1], [2].”
Background
Metadata
- Authors
- Tabari, M., & Yazdani, A.
- Venue
- IEEE Transactions on Smart Grid
- Published
- 2014-09
- Volume
- 5
- Issue
- 5
- Pages
- 2564-2573
- ISSN
- 1949-3053 (ISSN-L)
- 1949-3061
- OpenAlex
- W2055836636
- Cited by
- 160
- References
- 5
- FWCI
- 11.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.