Neural Network-Based Model-Free Adaptive Fault-Tolerant Control for Discrete-Time Nonlinear Systems With Sensor Fault
The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Abstract
In this paper, the main focus is to cope with the fault detection and estimation (FDE) and fault-tolerant control (FTC) issues of nonlinear single input single output model-free system (MFS), while only the input/output data are utilized. First, in accordance with the pseudo-partial-derivative approach, the original system is transformed into a compact form dynamic linearization data model, in which only one parameter is employed. Second, an estimator is developed to detect the fault. A key highlight is the design of a time varying residual threshold. Moreover, an online neural network (NN) approximator is utilized to learn the unknown fault dynamics and an FTC strategy is reconstructed based on the optimality criterion. In contrast to the previous methods, the main features of the proposed method are as follows: 1) the fault related problem is solved for MFS; 2) the number of system parameters is largely reduced; and 3) NNs are utilized to establish a novel fault estimation scheme. Finally, a numerical simulation is provided to show the effectiveness of the proposed FDE and FTC strategy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ioannou, P., & Sun, J. (1995) · Medical Entomology and Zoology · doi:10.1109/acc.1984.4171550 · Cited by 5,663
Bettering operation of Robots by learning
Arimoto, S., Kawamura, S., & Miyazaki, F. (1984) · Journal of Robotic Systems · doi:10.1002/rob.4620010203 · Cited by 3,474
Multivariate stochastic approximation using a simultaneous perturbation gradient approximation
Spall, J. C. (1992) · IEEE Transactions on Automatic Control · doi:10.1109/9.119632 · Cited by 2,283
Contributions to the theory of optimal control
Kalman, R. E. (1960) · Cited by 1,730
From model-based control to data-driven control: Survey, classification and perspective
Hou, Z.-S., & Wang, Z. (2013) · Information Sciences · doi:10.1016/j.ins.2012.07.014 · Cited by 1,405 · cited 1×
“As Hou and Wang [9] pointed out, there are two reasons for this situation.”
Self-citationData-based techniques focused on modern industry: An overview
Yin, S., Li, X., Gao, H., & Kaynak, O. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2308133 · Cited by 1,025 · cited 2×
“Even so, in the identical framework, the problem of FTC design and process optimization are still significant challenges [40].”
Subspace Methods for System Identification
Katayama, T. (2005) · Communications and Control Engineering · doi:10.1007/1-84628-158-x · Cited by 860
A Novel Data-Driven Control Approach for a Class of Discrete-Time Nonlinear Systems
Hou, Z., & Jin, S. (2011) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2010.2093136 · Cited by 796 · cited 9×
“Based on this point, there are a variety of DDC approaches as follows: unfalsified control methodology [17], iterative feedback tuning [18], model-free adaptive control (MFAC) [19], virtual reference feedback tuning [20], subspace approach [21], [22], approximate dynamic programming [23], [24], and others [25]–[27].”
InfluentialFault Accommodation for Nonlinear Dynamic Systems
Jiang, B., Staroswiecki, M., & Cocquempot, V. (2006) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2006.878732 · Cited by 781 · cited 1×
“In most existing methods, such as model-based FTC [29], [34], [37] or data-based FTC [10], [41], [44], [52], the Lyapunov theorem is an indispensable implementation tool, while it is not required here.”
Data-Driven Model-Free Adaptive Control for a Class of MIMO Nonlinear Discrete-Time Systems
Hou, Z., & Jin, S. (2011) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2011.2176141 · Cited by 685 · cited 2×
“ods [11], [13], [19], [46], [50], there are additional two points to be emphasized.”
Data-driven Design of Fault Diagnosis and Fault-tolerant Control Systems
Ding, S. X. (2014) · Advances in Industrial Control · doi:10.1007/978-1-4471-6410-4 · Cited by 669 · cited 3×
“Several data-based FDI and FTC methods are presented in [10], [41], [44], and [52], but the expensive devices are required, or the principal component analysis and partial least squares techniques are needed.”
Zhang, H., Luo, Y., & Liu, D. (2009) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2009.2027233 · Cited by 649
Self-citationReal-Time Implementation of Fault-Tolerant Control Systems With Performance Optimization
Yin, S., Luo, H., & Ding, S. X. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2273477 · Cited by 644 · cited 3×
“Several data-based FDI and FTC methods are presented in [10], [41], [44], and [52], but the expensive devices are required, or the principal component analysis and partial least squares techniques are needed.”
Zhang, H., Cui, L., Zhang, X., & Luo, Y. (2011) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2011.2168538 · Cited by 643 · cited 2×
“Based on this point, there are a variety of DDC approaches as follows: unfalsified control methodology [17], iterative feedback tuning [18], model-free adaptive control (MFAC) [19], virtual reference feedback tuning [20], subspace approach [21], [22], approximate dynamic programming [23], [24], and others [25]–[27].”
Self-citationAdaptive state feedback and tracking control of systems with actuator failures
Tao, G., Joshi, S. M., & Ma, X. (2001) · IEEE Transactions on Automatic Control · doi:10.1109/9.898697 · Cited by 622 · cited 1×
“Different from the existing FTC methods [29], [31], [37], where large number of unknown tuned parameters or designed parameters or lots of fuzzy rules exist, the number of parameter here is decreased greatly.”
A robust detection and isolation scheme for abrupt and incipient faults in nonlinear systems
Zhang, X., Polycarpou, M. M., & Parisini, T. (2002) · IEEE Transactions on Automatic Control · doi:10.1109/9.995036 · Cited by 595 · cited 1×
“Applying the technique from adaptive method [51], the stabilized learning algorithm of θ̂(k) is”
Tong, S., Zhang, L., & Li, Y. (2016) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmc.2015.2426131 · Cited by 539 · cited 1×
“Representative control design schemes contain zero-pole assignment, Lyapunov-based controller design [6], [7], linear quadratic regulator design, backstepping-based controller design [8], [56], [57], etc.”
Zhang, H., Wei, Q., & Luo, Y. (2008) · IEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics) · doi:10.1109/tsmcb.2008.920269 · Cited by 489 · cited 1×
“For this reason, data-driven control (DDC) theory emerges [11]–[16].”
Self-citationLi, Y., Tong, S., & Li, T. (2015) · IEEE Transactions on Fuzzy Systems · doi:10.1109/tfuzz.2014.2348017 · Cited by 463 · cited 1×
“Representative control design schemes contain zero-pole assignment, Lyapunov-based controller design [6], [7], linear quadratic regulator design, backstepping-based controller design [8], [56], [57], etc.”
Liu, Y.-J., Gao, Y., Tong, S., & Li, Y. (2016) · IEEE Transactions on Fuzzy Systems · doi:10.1109/tfuzz.2015.2418000 · Cited by 408 · cited 1×
“Based on this point, there are a variety of DDC approaches as follows: unfalsified control methodology [17], iterative feedback tuning [18], model-free adaptive control (MFAC) [19], virtual reference feedback tuning [20], subspace approach [21], [22], approximate dynamic programming [23], [24], and others [25]–[27].”
Li, Y., Tong, S., & Li, T. (2016) · IEEE Transactions on Fuzzy Systems · doi:10.1109/tfuzz.2015.2486811 · Cited by 400 · cited 1×
“Representative control design schemes contain zero-pole assignment, Lyapunov-based controller design [6], [7], linear quadratic regulator design, backstepping-based controller design [8], [56], [57], etc.”
Tang, X., Tao, G., & Joshi, S. M. (2007) · Automatica · doi:10.1016/j.automatica.2007.03.019 · Cited by 398
Wen, G., Chen, C. L. P., Liu, Y.-J., & Liu, Z. (2017) · IEEE Transactions on Cybernetics · doi:10.1109/tcyb.2016.2608499 · Cited by 387 · cited 3×
“An effective scheme is to use the neural networks (NNs) to approximate the unknown functions [7], [58], [59].”
Gao, Z., Liu, X., & Chen, M. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2497201 · Cited by 380
Tong, S., Wang, T., & Li, Y. (2013) · IEEE Transactions on Fuzzy Systems · doi:10.1109/tfuzz.2013.2264939 · Cited by 335 · cited 1×
“Generally speaking, depending on how the redundancy is used, the FTC approaches can be classified into two types [28]: 1) the passive method [29]–[33], [47]–[49] and”
Li, Y., & Tong, S. (2017) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2016.2598580 · Cited by 314 · cited 7×
“Although few NN-based FTC are developed [47], [55], all of them belong to passive FTC method.”
InfluentialLi, Y., Tong, S., Liu, Y., & Li, T. (2014) · IEEE Transactions on Fuzzy Systems · doi:10.1109/tfuzz.2013.2249585 · Cited by 257 · cited 1×
“Representative control design schemes contain zero-pole assignment, Lyapunov-based controller design [6], [7], linear quadratic regulator design, backstepping-based controller design [8], [56], [57], etc.”
Yang, C., Ge, S. S., Xiang, C., Chai, T., & Lee, T. H. (2008) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2008.2003290 · Cited by 236 · cited 6×
“Similar assumption on the control direction can be found in [13], [14], and [46].”
InfluentialLiu, L., Wang, Z., & Zhang, H. (2017) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2016.2517155 · Cited by 232
Self-citationLiu, Y.-J., Tang, L., Tong, S., Chen, C. L. P., & Li, D.-J. (2015) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2014.2360724 · Cited by 225 · cited 7×
“Based on this point, there are a variety of DDC approaches as follows: unfalsified control methodology [17], iterative feedback tuning [18], model-free adaptive control (MFAC) [19], virtual reference feedback tuning [20], subspace approach [21], [22], approximate dynamic programming [23], [24], and others [25]–[27].”
InfluentialA survey of fault-tolerant controllers based on safety-related issues
Yu, X., & Jiang, J. (2015) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2015.03.004 · Cited by 210 · cited 1×
“Generally speaking, depending on how the redundancy is used, the FTC approaches can be classified into two types [28]: 1) the passive method [29]–[33], [47]–[49] and”
A Novel Model-Free Adaptive Control Design for Multivariable Industrial Processes
Xu, D., Jiang, B., & Shi, P. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2308161 · Cited by 201 · cited 7×
“We follow the approach proposed in [11], in which the multiobserver-based adaptive control problem is addressed.”
InfluentialAdaptive actuator fault tolerant control for uncertain nonlinear systems with multiple actuators
Yang, Q., Ge, S. S., & Sun, Y. (2015) · Automatica · doi:10.1016/j.automatica.2015.07.006 · Cited by 180 · cited 6×
“Generally speaking, depending on how the redundancy is used, the FTC approaches can be classified into two types [28]: 1) the passive method [29]–[33], [47]–[49] and”
InfluentialMa, H., Wang, Z., Wang, D., Liu, D., Yan, P., & Wei, Q. (2016) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmc.2015.2470635 · Cited by 160 · cited 1×
“Based on this point, there are a variety of DDC approaches as follows: unfalsified control methodology [17], iterative feedback tuning [18], model-free adaptive control (MFAC) [19], virtual reference feedback tuning [20], subspace approach [21], [22], approximate dynamic programming [23], [24], and others [25]–[27].”
Self-citationWang, D., Liu, D., Li, H., Luo, B., & Ma, H. (2016) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmc.2015.2466191 · Cited by 159
Zhao, K., Song, Y., & Shen, Z. (2018) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2016.2619914 · Cited by 159 · cited 9×
“Although few NN-based FTC are developed [47], [55], all of them belong to passive FTC method.”
InfluentialLi, Y., & Yang, G. (2016) · IEEE Transactions on Systems Man and Cybernetics Systems · doi:10.1109/tsmc.2016.2521824 · Cited by 150
Fault Detection and Isolation for a Class of Uncertain State-Feedback Fuzzy Control Systems
Yang, G., & Wang, H. (2014) · IEEE Transactions on Fuzzy Systems · doi:10.1109/tfuzz.2014.2308920 · Cited by 137 · cited 9×
“Then the fault is detected at the 168th step in [37] while the fault is detected at the 152th step in this paper.”
InfluentialLi, L., Ding, S. X., Qiu, J., & Yang, Y. Z. (2016) · IEEE Transactions on Cybernetics · doi:10.1109/tcyb.2015.2513438 · Cited by 121 · cited 2×
“Several data-based FDI and FTC methods are presented in [10], [41], [44], and [52], but the expensive devices are required, or the principal component analysis and partial least squares techniques are needed.”
Data-Driven Control Design for Neuroprotheses: A Virtual Reference Feedback Tuning (VRFT) Approach
Previdi, F., Schauer, T., Savaresi, S. M., & Hunt, K. J. (2004) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2003.821967 · Cited by 109 · cited 1×
“Based on this point, there are a variety of DDC approaches as follows: unfalsified control methodology [17], iterative feedback tuning [18], model-free adaptive control (MFAC) [19], virtual reference feedback tuning [20], subspace approach [21], [22], approximate dynamic programming [23], [24], and others [25]–[27].”
Wang, Z., Liu, L., Zhang, H., & Xiao, G. (2015) · IEEE Transactions on Systems Man and Cybernetics Systems · doi:10.1109/tsmc.2015.2478885 · Cited by 102 · cited 4×
“Moreover, the reinforcement learning-based fault-tolerant control (FTC) problem for a class of multiple input multiple output nonlinear discretetime systems is addressed in [54].”
InfluentialSelf-citationAn approximate internal model-based neural control for unknown nonlinear discrete processes
Li, H., & Deng, H. (2006) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2006.873277 · Cited by 95
Wang, L., Mo, S., Zhou, D., Gao, F., & Chen, X. (2012) · Journal of Process Control · doi:10.1016/j.jprocont.2012.05.016 · Cited by 92 · cited 3×
“Several data-based FDI and FTC methods are presented in [10], [41], [44], and [52], but the expensive devices are required, or the principal component analysis and partial least squares techniques are needed.”
Panagi, P., & Polycarpou, M. M. (2011) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2011.2166313 · Cited by 85
Adaptive Neural Network Control for a DC Motor System with Dead-Zone
Liu, L., Liu, Y., & Chen, C. L. P. (2012) · Nonlinear Dynamics · doi:10.1007/s11071-012-0698-2 · Cited by 60 · cited 6×
“Representative control design schemes contain zero-pole assignment, Lyapunov-based controller design [6], [7], linear quadratic regulator design, backstepping-based controller design [8], [56], [57], etc.”
InfluentialSelf-citationAdaptive NN fault-tolerant control for discrete-time systems in triangular forms with actuator fault
Liu, L., Wang, Z., & Zhang, H. (2014) · Neurocomputing · doi:10.1016/j.neucom.2014.10.076 · Cited by 53 · cited 4×
“Moreover, it is a passive FTC approach in [33], [47], and [54], where fixed structure of controller is developed whether the fault occurs or not, but it is an active FTC approach in Section IV, in which a systematic FDE and FTC method is developed by making use of NNs.”
InfluentialSelf-citationSun, Q., Hu, F., & Hao, Q. (2013) · IEEE Transactions on Systems Man and Cybernetics Systems · doi:10.1109/tsmc.2013.2263130 · Cited by 48 · cited 1×
“In addition, the subspace-aided scheme [45] is another effective approach to deal with the complex data and failure data.”
Fault tolerant synchronization for a class of complex interconnected neural networks with delay
Wang, Z., Li, T., & Zhang, H. (2013) · International Journal of Adaptive Control and Signal Processing · doi:10.1002/acs.2399 · Cited by 36
Self-citationDesign and Implementation of Lifecycle Management for Industrial Control Applications
Yang, Y. Z., Yong, Z., Ding, S. X., & Li, L. (2015) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2014.2367316 · Cited by 18 · cited 1×
“By successfully identifying the key parameters, a diagnostic observer can be designed based on process measurements to detect fault and tolerate fault [43], [44].”
Cited by
Phan, V. D., Vo, C. P., Dao, H. V., & Ahn, K. K. (2021) · IEEE Access · doi:10.1109/access.2021.3059947 · Cited by 58
Nahian, S. A., Dinh, T. Q., Dao, H. V., & Ahn, K. K. (2020) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2020.3013609 · Cited by 29
“First, unlike [29] and other observer-based fault diagnosis approaches presented in [8], [18], and [28], the newly developed UIOEFIR estimator can simultaneously estimate the system states and the unknown fault magnitude without providing prior noise statistics while defining only single parameter N.”
BackgroundMethodInfluentialKharrat, M., & Alhazmi, H. (2024) · AIMS Mathematics · doi:10.3934/math.2024668 · Cited by 11
Dong, Z.-Y., Xinyi, Y., Wei, Y., Zhou, L., & Ou, L. (2024) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2024.3481544 · Cited by 6
Metadata
- Authors
- Wang, Z., Liu, L., & Zhang, H.
- Venue
- IEEE Transactions on Systems, Man, and Cybernetics: Systems
- Published
- 2017-08
- Volume
- 47
- Issue
- 8
- Pages
- 2351-2362
- ISSN
- 2168-2216 (ISSN-L)
- 2168-2232
- OpenAlex
- W2594353858
- Cited by
- 163
- References
- 49
- FWCI
- 8.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.