The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Analysis and Evaluation of DC-Link Capacitors for High-Power-Density Electric Vehicle Drive Systems
Abstract
In electric vehicle (EV) inverter systems, direct-current-link capacitors, which are bulky, heavy, and susceptible to degradation from self heating, can become a critical obstacle to high power density. This paper presents a comprehensive method for the analysis and comparative evaluation of dc-link capacitor applications to minimize the volume, mass, and capacitance. Models of equivalent series resistance that are valid over a range of frequency and operating temperature are derived and experimentally validated. The root-mean-square values and frequency spectra of the capacitor current are analyzed with respect to three modulation strategies and various operating conditions over practical ranges of load power factor and modulation index in EV drive systems. The modeling and analysis also consider the self-heating process and resulting core temperature of the dc-link capacitors, which impacts their lifetimes. Based on an 80-kW permanent-magnet (PM) motor drive system, the application of electrolytic capacitors and film capacitors has been evaluated by both simulation and experimental tests. The inverter power density is improved from 2.99 kW/L to 13.3 kW/L, without sacrificing the system performance in terms of power loss, core temperature, and lifetime.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Salmasi, F. R. (2007) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2007.899933 · Cited by 863
Kolar, J. W., & Round, S. D. (2006) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20050458 · Cited by 372
Application of Z-Source Inverter for Traction Drive of Fuel Cell—Battery Hybrid Electric Vehicles
Peng, F. Z., Shen, M., & Holland, K. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.897123 · Cited by 370
Schaltz, E., Khaligh, A., & Rasmussen, P. O. (2009) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2009.2027909 · Cited by 357
Yoo, H., Sul, S.-K., Park, Y., & Jeong, J. (2008) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.912749 · Cited by 264
Impact of SiC Devices on Hybrid Electric and Plug-In Hybrid Electric Vehicles
Zhang, H., Tolbert, L. M., & Ozpineci, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2102734 · Cited by 255
Vogelsberger, M. A., Wiesinger, T., & Ertl, H. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2059713 · Cited by 244
A DC-link capacitor minimization method through direct capacitor current control
Gu, B.-G., & Nam, K. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.870036 · Cited by 227
A Cost-Effective Method of Electric Brake With Energy Regeneration for Electric Vehicles
Yang, M.-J., Jhou, H.-L., Ma, B.-Y., & Shyu, K.-K. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2015356 · Cited by 220
Reliability Prediction for Inverters in Hybrid Electrical Vehicles
Hirschmann, D., Tissen, D., Schroder, S., & De Doncker, R. W. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.909236 · Cited by 209
Williamson, S. S., Emadi, A., & Rajashekara, K. (2007) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2007.896967 · Cited by 199
Life prediction model for aluminum electrolytic capacitors
Gasperi, M. L. (2002) · IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting · doi:10.1109/ias.1996.559241 · Cited by 179
Chang, H.-C., & Liaw, C. M. (2009) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2009.2017546 · Cited by 170
Mapelli, F. L., Tarsitano, D., & Mauri, M. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2029520 · Cited by 158
Bryant, A. T., Mawby, P., Palmer, P., Santi, E., & Hudgins, J. L. (2008) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2008.921388 · Cited by 139
Integration of plug-in hybrid and electric vehicles: Experience from China
Song, Y., Yang, X., & Lu, Z. (2010) · IEEE Power Engineering Society General Meeting · doi:10.1109/pes.2010.5589926 · Cited by 97
Fujita, H., Watanabe, Y., & Akagi, H. (2001) · IEEE Transactions on Power Electronics · doi:10.1109/63.949506 · Cited by 78
Rendusara, D., Çengelci, E., Enjeti, P. N., et al. (1999) · doi:10.1109/apec.1999.750457 · Cited by 44
Inverter Design for Hybrid Electrical Vehicles Considering Mission Profiles
Hirschmann, D., Tissen, D., Schröder, S., & Doncker, R. W. D. (2005) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2005.1554616 · Cited by 28
Cited by
Prateek, Thakur, V. K., & Gupta, R. K. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00495 · Cited by 1,659
Reliability of Capacitors for DC-Link Applications in Power Electronic Converters—An Overview
Wang, H., & Blaabjerg, F. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2014.2308357 · Cited by 1,384
Automotive Traction Inverters: Current Status and Future Trends
Reimers, J., Dorn-Gomba, L., Mak, C., & Emadi, A. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2019.2897899 · Cited by 375
“be achieved with film capacitors, as shown in [36].”
Reliability of Power Electronic Systems: An Industry Perspective
Falck, J., Felgemacher, C., Rojko, A., Liserre, M., & Zacharias, P. (2018) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2018.2825481 · Cited by 336
A Dual Three-Level T-NPC Inverter for High-Power Traction Applications
Bhattacharya, S., Mascarella, D., Joos, G., Cyr, J.-M., & Xu, J. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2517819 · Cited by 116
Metadata
- Authors
- Wen, H., Xiao, W., Wen, X., & Armstrong, P.
- Venue
- IEEE Transactions on Vehicular Technology
- Published
- 2012-09
- Volume
- 61
- Issue
- 7
- Pages
- 2950-2964
- ISSN
- 0018-9545 (ISSN-L)
- 1939-9359
- OpenAlex
- W2051969659
- Cited by
- 271
- References
- 19
- FWCI
- 7.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.