The DOI matches its Crossref record.
Solid-State Thermal Management for Lithium-Ion EV Batteries
Abstract
Battery thermal management system (BTMS) is essential for electric-vehicle (EV) and hybrid-vehicle (HV) battery packs to operate effectively in all climates. Lithium-ion (Li-ion) batteries offer many advantages to the EV such as high power and high specific energy. However, temperature affects their performance, safety, and productive life. This paper is about the design and evaluation of a BTMS based on the Peltier effect heat pumps. The discharge efficiency of a 60-Ah prismatic Li-ion pouch cell was measured under different rates and different ambient temperature values. The obtained results were used to design a solid-state BTMS based on Peltier thermoelectric coolers (TECs). The proposed BTMS is then modeled and evaluated at constant current discharge in the laboratory. In addition, The BTMS was installed in an EV that was driven in the US06 cycle. The thermal response and the energy consumption of the proposed BTMS were satisfactory.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Review on battery thermal management system for electric vehicles
Kim, J., Oh, J., & Lee, H. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.12.020 · Cited by 1,292
Research progress on power battery cooling technology for electric vehicles
Lu, M., Zhang, X., Ji, J., Xu, X., & Zhang, Y. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101155 · Cited by 434
Panchal, S., Khasow, R., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.010 · Cited by 397
Electric vehicle battery thermal management system with thermoelectric cooling
Lyu, Y., Siddique, A. R. M., Majid, S. H., Biglarbegian, M., Gadsden, S. A., & Mahmud, S. (2019) · Energy Reports · doi:10.1016/j.egyr.2019.06.016 · Cited by 374
Siddique, A. R. M., Mahmud, S., & Heyst, B. V. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.08.094 · Cited by 310
Panchal, S., Mathew, M., Fraser, R., & Fowler, M. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.02.046 · Cited by 295
Comparison of Different Battery Types for Electric Vehicles
Iclodean, C., Varga, B., Burnete, N., Cimerdean, D., & Jurchiş, B. (2017) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/252/1/012058 · Cited by 277
Recent developments in the passive and hybrid thermal management techniques of lithium-ion batteries
Patel, J. R., & Rathod, M. K. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228820 · Cited by 276
Panchal, S., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.11.019 · Cited by 271
Progress in battery thermal management systems technologies for electric vehicles
Gharehghani, A., Rabiei, M., Mehranfar, S., Saeedipour, S., Mahmoudzadeh Andwari, A., García, A., & Reche, C. M. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.114654 · Cited by 263
Panchal, S., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.05.126 · Cited by 261
Impact of Heating System on the Range of an Electric Vehicle
Horrein, L., Bouscayrol, A., Lhomme, W., & Depature, C. (2017) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2016.2615095 · Cited by 65
Metadata
- Authors
- Alaoui, C.
- Venue
- IEEE Transactions on Vehicular Technology
- Published
- 2013-01
- Volume
- 62
- Issue
- 1
- Pages
- 98-107
- ISSN
- 0018-9545 (ISSN-L)
- 1939-9359
- OpenAlex
- W2006339054
- Cited by
- 166
- References
- 0
- FWCI
- 13.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.