The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
A Bidirectional Nonisolated Multi-Input DC–DC Converter for Hybrid Energy Storage Systems in Electric Vehicles
Abstract
To process the power in hybrid energy systems using a reduced part count, researchers have proposed several multiinput dc-dc power converter topologies to transfer power from different input voltage sources to the output. This paper proposes a novel bidirectional nonisolated multi-input converter (MIC) topology for hybrid systems to be used in electric vehicles composed of energy storage systems (ESSs) with different electrical characteristics. The proposed converter has the ability to control the power of ESSs by allowing active power sharing. The voltage levels of utilized ESSs can be higher or lower than the output voltage. The inductors of the converter are connected to a single switch; therefore, the converter requires only one extra active switch for each input, unlike its counterparts, hence resulting in reduced element count. The proposed MIC topology is compared with its counterparts concerning various parameters. It is analyzed in detail, and then, this analysis is validated by simulation and through a 1-kW prototype based on a battery/ultracapacitor hybrid ESS.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fundamentals of Power Electronics
Erickson, R. W., & Maksimović, D. (2001) · Springer eBooks · doi:10.1007/b100747 · Cited by 6,112
Fundamentals of Power Electronics
Erickson, R. W., & Maksimović, D. (2020) · Springer eBooks · doi:10.1007/978-3-030-43881-4 · Cited by 5,420
Khaligh, A., & Li, Z. (2010) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2010.2047877 · Cited by 1,817
Energy Storage Systems for Automotive Applications
Lukic, S. M., Cao, J., Bansal, R. C., Rodriguez, F., & Emadi, A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918390 · Cited by 1,025
Zhou, H., Bhattacharya, T., Tran, D., Siew, T. S. T., & Khambadkone, A. M. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2095040 · Cited by 704
A multiple-input DC-DC converter topology
Dobbs, B. G., & Chapman, P. L. (2003) · IEEE Power Electronics Letters · doi:10.1109/lpel.2003.813481 · Cited by 511
Design of Multiple-Input Power Converter for Hybrid Vehicles
Solero, L., Lidozzi, A., & Pomilio, J. A. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.854020 · Cited by 478
Shen, J., Dusmez, S., & Khaligh, A. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2334233 · Cited by 430
Nejabatkhah, F., Danyali, S., Hosseini, S. H., Sabahi, M., & Niapour, S. M. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2172465 · Cited by 406
Design and Analysis of Novel Control Strategy for Battery and Supercapacitor Storage System
Kollimalla, S. K., Mishra, M. K., & Narasamma, N. L. (2014) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2014.2336896 · Cited by 398
Camara, M. B., Gualous, H., Gustin, F., Berthon, A., & Dakyo, B. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2025283 · Cited by 394
Zandi, M., Payman, A., Martin, J.-P., Pierfederici, S., Davat, B., & Meibody-Tabar, F. (2011) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2010.2091433 · Cited by 393
Optimizing for Efficiency or Battery Life in a Battery/Supercapacitor Electric Vehicle
Carter, R., Cruden, A., & Hall, P. J. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2188551 · Cited by 343
A Multiple-Input DC–DC Converter Topology
Khaligh, A., Cao, J., & Lee, Y.-J. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2009308 · Cited by 282
Lu, S., Corzine, K. A., & Ferdowsi, M. (2007) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2007.896971 · Cited by 221
Comparative analysis of bidirectional three-level DC–DC converter for automotive applications
Dusmez, S., Hasanzadeh, A., & Khaligh, A. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336605 · Cited by 204
Samosir, A. S., & Yatim, A. H. M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2039458 · Cited by 201
A Novel Soft-Switching Multiport Bidirectional DC–DC Converter for Hybrid Energy Storage System
Ding, Z., Yang, C., Zhang, Z., Wang, C., & Xie, S. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2264596 · Cited by 180
New Extendable Single-Stage Multi-input DC–DC/AC Boost Converter
Danyali, S., Hosseini, S. H., & Gharehpetian, G. B. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2256468 · Cited by 176
Dusmez, S., & Khaligh, A. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2299237 · Cited by 169
Design of a Semiactive Battery-Ultracapacitor Hybrid Energy Source
Kuperman, A., Aharon, I., Malki, S., & Kara, A. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2203361 · Cited by 168
Tani, A., Camara, M. B., & Dakyo, B. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2206415 · Cited by 157
Bidirectional DC-DC converter modeling and unified controller with digital implementation
Zhang, J., Lai, J.-S., & Yu, W. (2008) · 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2008.4522963 · Cited by 115
A New Multiinput Three-Level DC/DC Converter
Düşmez, S., Li, X., & Akin, B. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2424246 · Cited by 109
A Fully Directional Universal Power Electronic Interface for EV, HEV, and PHEV Applications
Onar, O. C., Kobayashi, J., & Khaligh, A. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2236106 · Cited by 100
Lu, S., Corzine, K. A., & Ferdowsi, M. (2007) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2007.896970 · Cited by 94
Control of Multi-Input Integrated Buck-Boost Converter
Veerachary, M., & Sawant, K. (2008) · IEEE International Conference on Industrial and Information Systems (ICIIS) · doi:10.1109/iciinfs.2008.4798489 · Cited by 25
FC/UC hybridization for dynamic loads with a novel double input DC–DC converter topology
Vural, B. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.10.094 · Cited by 18
Self-citationAnun, M., Ordonez, M., Galiano, I., & Oggier, G. G. (2014) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2014.6803534 · Cited by 14
Battery/UC hybridization for electric vehicles via a novel double input DC/DC power converter
Akar, F., & Vural, B. (2013) · International Conference on Electric Power and Energy Conversion Systems · doi:10.1109/epecs.2013.6713077 · Cited by 12
Self-citation
Cited by
A comprehensive review on hybrid electric vehicles: architectures and components
Singh, K. V., Bansal, H. O., & Singh, D. (2019) · Journal of Modern Transportation · doi:10.1007/s40534-019-0184-3 · Cited by 357
Zhang, Y., Liu, Q., Gao, Y., Li, J., & Sumner, M. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2850020 · Cited by 178
“ergy sources and the high-voltage dc bus, a bidirectional dc–dc converter with a wide voltage gain range is needed to interface the energy sources and the onboard dc bus [5].”
Background
Metadata
- Authors
- Akar, F., Tavlasoglu, Y., Ugur, E., Vural, B., & Aksoy, I.
- Venue
- IEEE Transactions on Vehicular Technology
- Published
- 2016-10
- Volume
- 65
- Issue
- 10
- Pages
- 7944-7955
- ISSN
- 0018-9545 (ISSN-L)
- 1939-9359
- OpenAlex
- W2345011611
- Cited by
- 267
- References
- 30
- FWCI
- 7.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.