The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
After 60 years: A new formula for computing quality factor is warranted
Abstract
A new formulation for computing the unloaded quality factor (Q) of a resonator or of any terminated electromagnetic or piezoelectric cavity from its measured S parameters is proposed. This formulation, based on the work of Dicke, and Bode, computes Q at a continuum of frequencies from below the resonant frequency (fs) to above the anti-resonant frequency (fp). Sixty years ago Dicke and Beringer derived a pair of formulations for Q in terms of the measured impedance (Z) and admittance (Y) [1]. The new formulation has two important advantages over Dicke's formulations: (1) Even for resonators that are free of spurious resonances - whose S-parameters are near ideal -- Dicke's Z and Y based formulations yield erroneous Q values over a range of frequencies (called “dead zones”) in the vicinity of the frequencies at which the functions Z and Y are singular (at fp and fs respectively). Since the S parameters of such an ideal resonator do not have any singularities, the new Q formulation provides reliable Q values over the full range of frequencies. (2) For non-ideal resonators exhibiting spurious lateral-mode resonances in certain frequency ranges, both the new and Dicke formulations report Q values that are clearly erroneous since they oscillate from positive to negative. Dicke does not explain why his formulation breaks down in such regions nor have we found such an explanation in the literature. In contrast to this, this work explains why the S parameter based Q formula is invalidated over regions of frequency space in which ln(mag(S)) fluctuates wildly. We show that in such regions that pre-conditioning of the S-parameter data with a Gaussian window average is useful in yielding a meaningful value for Q. We propose that the S parameter based Q formulation, being devoid of “dead zones” should be used as a standard by which piezoelectric resonators fabricated in different technologies e.g. FBAR, SAW, BAW be compared.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Network analysis and feedback amplifier design
Bode, H. W. (1945) · Virtual Defense Library (Ministerio de Defensa) · Cited by 3,119
Cited by
Acoustic Wave Filter Technology–A Review
Ruppel, C. C. W. (2017) · IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control · doi:10.1109/tuffc.2017.2690905 · Cited by 373
High-Performance SAW Resonator on New Multilayered Substrate Using LiTaO3Crystal
Takai, T., Iwamoto, H., Takamine, Y., Yamazaki, H., Fuyutsume, T., Kyoya, H., Nakao, T., Kando, H., Hiramoto, M., Toi, T., et al. (2017) · IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control · doi:10.1109/tuffc.2017.2738119 · Cited by 280
Yan, Y., Huang, K., Zhou, H., Zhao, X., Li, W., Li, Z., Yi, A., Huang, H., Lin, J., Zhang, S., et al. (2019) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.9b00351 · Cited by 83
Suppression of Transverse Modes in 50°YX-LiTaO3/SiO2/Si POI SAW Resonator with Groove Configuration
Li, M., Qi, M., Chen, Y., Cheng, Y., Cao, L., & Mu, X. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c07223 · Cited by 6
Metadata
- Authors
- Feld, D. A., Parker, R., Ruby, R., Bradley, P., & Dong, S.
- Venue
- 2008 IEEE Ultrasonics Symposium
- Publisher
- IEEE
- Published
- 2008-11
- Pages
- 431-436
- ISSN
- 1051-0117 (ISSN-L)
- OpenAlex
- W2537171897
- Cited by
- 301
- References
- 1
- FWCI
- 3.64
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: After 60 years: A new formula for computing quality factor is warranted. https://app.cochat.ai/papers/10.1109/ultsym.2008.0105
- The paper
- Feld, D. A., Parker, R., Ruby, R., Bradley, P., & Dong, S. (2008). After 60 years: A new formula for computing quality factor is warranted. 2008 IEEE Ultrasonics Symposium. https://doi.org/10.1109/ultsym.2008.0105
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.