The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Regulatory Considerations in the Design and Manufacturing of Implantable 3D‐Printed Medical Devices
Open accessAbstract
Three‐dimensional (3D) printing, or additive manufacturing, technology has rapidly penetrated the medical device industry over the past several years, and innovative groups have harnessed it to create devices with unique composition, structure, and customizability. These distinctive capabilities afforded by 3D printing have introduced new regulatory challenges. The customizability of 3D‐printed devices introduces new complexities when drafting a design control model for FDA consideration of market approval. The customizability and unique build processes of 3D‐printed medical devices pose unique challenges in meeting regulatory standards related to the manufacturing quality assurance. Consistent material powder properties and optimal printing parameters such as build orientation and laser power must be addressed and communicated to the FDA to ensure a quality build. Postprinting considerations unique to 3D‐printed devices, such as cleaning, finishing and sterilization are also discussed. In this manuscript we illustrate how such regulatory hurdles can be navigated by discussing our experience with our group's 3D‐printed bioresorbable implantable device.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
International Organization for Standardization
(2015) · Encyclopedia of Astrobiology · doi:10.1007/978-3-662-44185-5_100574 · Cited by 6,716
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Self-citationA comparison of micro CT with other techniques used in the characterization of scaffolds
Ho, S. T., & Hutmacher, D. W. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.08.035 · Cited by 609
Dependence of mechanical properties of polyamide components on build parameters in the SLS process
Caulfield, B., McHugh, P. E., & Lohfeld, S. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2006.09.007 · Cited by 598
Bioresorbable Airway Splint Created with a Three-Dimensional Printer
Zopf, D. A., Hollister, S. J., Nelson, M. E., Ohye, R. G., & Green, G. E. (2013) · New England Journal of Medicine · doi:10.1056/nejmc1206319 · Cited by 589
Self-citationMorrison, R. J., Hollister, S. J., Niedner, M. F., Mahani, M. G., Park, A. H., Mehta, D. K., Ohye, R. G., & Green, G. E. (2015) · Science Translational Medicine · doi:10.1126/scitranslmed.3010825 · Cited by 498
Self-citationEffects of processing on microstructure and properties of SLS Nylon 12
Zarringhalam, H., Hopkinson, N., Kamperman, N. F., & de Vlieger, J. J. (2006) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.07.084 · Cited by 295
Banks, J. P. (2013) · IEEE Pulse · doi:10.1109/mpul.2013.2279617 · Cited by 293
3D Printing and Neurosurgery—Ready for Prime Time?
Klein, G. T., Lu, Y., & Wang, M. Y. (2013) · World Neurosurgery · doi:10.1016/j.wneu.2013.07.009 · Cited by 224
Tracheobronchomalacia and Excessive Dynamic Airway Collapse
Murgu, S., & Colt, H. (2013) · Clinics in Chest Medicine · doi:10.1016/j.ccm.2013.05.003 · Cited by 207
Selective laser sintering of hydroxyapatite/poly-ε-caprolactone scaffolds
Eosoly, S., Brabazon, D., Lohfeld, S., & Looney, L. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.07.018 · Cited by 186
Experimental and finite element study of a human mandible
Vollmer, D., Meyer, U., Joos, U., Vègh, A., & Piffkò, J. (2000) · Journal of Cranio-Maxillofacial Surgery · doi:10.1054/jcms.2000.0125 · Cited by 174
Eshraghi, S., & Das, S. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.022 · Cited by 153
Fabrication direction optimization to minimize post-machining in layered manufacturing
Ahn, D., Kim, H.-C., & Lee, S. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2006.05.004 · Cited by 138
Partee, B., Hollister, S. J., & Das, S. (2005) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2162589 · Cited by 135
Self-citationSalmoria, G. V., Klauss, P., Paggi, R. A., Κanis, L. A., & Lago, A. (2009) · Polymer Testing · doi:10.1016/j.polymertesting.2009.05.008 · Cited by 114
Lohfeld, S., Cahill, S., Barron, V., McHugh, P. E., Dürselen, L., Kreja, L., Bausewein, C., & Ignatius, A. A. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.05.018 · Cited by 109
Zopf, D., Flanagan, C. L., Wheeler, M. B., et al. (2014) · JAMA Otolaryngology–Head & Neck Surgery · doi:10.1001/jamaoto.2013.5644 · Cited by 107
Moisture based three-dimensional printing of calcium phosphate structures for scaffold engineering
Butscher, A., Bohner, M., Doebelin, N., Galea, L., Loeffel, O., & Müller, R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.10.009 · Cited by 106
Assessment of non-uniform shrinkage in the laser sintering of polymer materials
Soe, S. P., Eyers, D. R., & Setchi, R. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4712-0 · Cited by 35
Cited by
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Additively manufactured medical products – the FDA perspective
Di Prima, M., Coburn, J., Hwang, D., Kelly, J., Khairuzzaman, A., & Ricles, L. (2016) · 3D Printing in Medicine · doi:10.1186/s41205-016-0005-9 · Cited by 328
Polymeric Systems for Bioprinting
Bedell, M. L., Navara, A. M., Du, Y., Zhang, S., & Mikos, A. G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00834 · Cited by 258
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Metadata
- Authors
- Morrison, R. J., Kashlan, K. N., Flanangan, C. L., Wright, J. K., Green, G. E., Hollister, S. J., & Weatherwax, K. J.
- Venue
- Clinical and Translational Science
- Publisher
- Wiley
- Published
- 2015-08-03
- Volume
- 8
- Issue
- 5
- Pages
- 594-600
- ISSN
- 1752-8054 (ISSN-L)
- 1752-8062
- OpenAlex
- W1955801659
- Cited by
- 290
- References
- 22
- FWCI
- 28.02
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.